Anyone have a setup of 15mm spacers in front and 20 rear?

SoLif3Lik3 · 05-23-2014, 05:42 PM

Ok...now that my head is dizzy and spinning from reading all of this, I think this is the appropriate place to get a final answer since it has to do with correct size spacers.

I'm considering a set of aftermarket wheels that have lower offsets than the 19" RAYS but not low enough, at least in the rear. The fronts should be ok (going on the notion that an additional 15mm - 20mm up front is ideal) at 20x9 et30. That's 17mm less than stock putting me smack dab in between the 15 - 20 window. The rear is what will need a spacer. 20x10.5 et25. That's 11mm less than stock. If I add a 12mm bolt on spacer to the rear that will get me to 23mm which is smack dab in bewteen the 20-25 window for the rears.

This should be good, right?

20x9 et30 on 255/35/20
20x10.5 et13 on 285/30/20

Suspension = ARK GT-F springs (1.20f/1.0r)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
15mm Spacer installed (Rear)	Minicobra1	Wheels & Tires	72	05-26-2011 10:40 PM
Front and rear valence group buy!	SpawnAeroJohn	Exterior & Interior	143	12-23-2009 01:28 AM
Parking sensors for rear/front?	jekel	Nissan 370Z General Discussions	9	07-29-2009 06:32 PM
Front and Rear Emblem?	cwj370	Exterior & Interior	16	05-02-2009 09:21 AM
Size of Front & Rear Emblems	mspeasl	Exterior & Interior	14	02-27-2009 05:22 PM

05-23-2014, 05:42 PM	#40 (permalink)
SoLif3Lik3 Base Member Join Date: Apr 2014 Location: Mill Creek, WA Posts: 75 Drives: '11 MINI Cooper S Rep Power: 13	Ok...now that my head is dizzy and spinning from reading all of this, I think this is the appropriate place to get a final answer since it has to do with correct size spacers. I'm considering a set of aftermarket wheels that have lower offsets than the 19" RAYS but not low enough, at least in the rear. The fronts should be ok (going on the notion that an additional 15mm - 20mm up front is ideal) at 20x9 et30. That's 17mm less than stock putting me smack dab in between the 15 - 20 window. The rear is what will need a spacer. 20x10.5 et25. That's 11mm less than stock. If I add a 12mm bolt on spacer to the rear that will get me to 23mm which is smack dab in bewteen the 20-25 window for the rears. This should be good, right? 20x9 et30 on 255/35/20 20x10.5 et13 on 285/30/20 Suspension = ARK GT-F springs (1.20f/1.0r)