UpRev Dyno Jet Tune - Stillen G3 Intake, Stillen CBE, M370, F.I. TP Shortie

scruffydog · 06-25-2013, 04:31 PM

What do you guys think? A little low? or just about right?
My Current Setup:
-UpRev
-Motordyne M370
-Stillen G3 Intake
-Stillen Cat Back Exhaust
-Fast Intentions Non-Resonated Test Pipe (Shortie)
-34 Row Oil Cooler

The only other power mod bolt I don't have is Headers.

I had my car dyno-ed 6 months back on a different dyno (Mustange) 5 pulls also but with the below config:
-No Uprev or prior tuning
-Berk HFC instead of F.I. T.P.
-Stock Intake instead of Stillen G3 Intake.
-Stock HVR Intake Manifold instead of Motordyne M370.My results then was averaging 298 WHP.

I'm aware that different dynos could be off by a bit and shouldn't be compared, but I am a little dissapointed with my results considering I modded the car quite a bit. I feel like all that mods w/a tune only increased the car 5WHP.

370Z JT · 06-25-2013, 04:38 PM

Go back to the mustang dyno and do some pulls.

And if you're concerned about peak power, dump the M370.

Just my opinion.

@NT · 06-25-2013, 04:39 PM

Seems pretty good compared to other dyno results posted. You can't really compare the two results since they were on different dynos.

scruffydog · 06-25-2013, 04:45 PM

Quote:

Originally Posted by 370Z JT

Go back to the mustang dyno and do some pulls.

And if you're concerned about peak power, dump the M370.

Just my opinion.

Thanks, I appreciate that. I actually have to go home and take a look at the Mustang dyno chart to see the overall WHP. I track my car so I actually aren't too concerned about peak HP. It's just that's all I have now to use as a benchmark.

scruffydog · 06-25-2013, 05:00 PM

Quote:

Originally Posted by @NT

Seems pretty good compared to other dyno results posted. You can't really compare the two results since they were on different dynos.

That's a very good idea, thanks for the idea. I might do that this Friday when I take my car up to Track.

Alkatraz · 06-26-2013, 02:25 AM

Dyno's only give you a number. If you want a number that will show that the mods have actually achieved something, then you should go to a drag strip before and after mods.

06-25-2013, 04:31 PM	#1 (permalink)
scruffydog A True Z Fanatic Join Date: Jan 2009 Location: Nor Cal Posts: 1,113 Drives: with his eyes close Rep Power: 717	UpRev Dyno Jet Tune - Stillen G3 Intake, Stillen CBE, M370, F.I. TP Shortie What do you guys think? A little low? or just about right? My Current Setup: -UpRev -Motordyne M370 -Stillen G3 Intake -Stillen Cat Back Exhaust -Fast Intentions Non-Resonated Test Pipe (Shortie) -34 Row Oil Cooler The only other power mod bolt I don't have is Headers. I had my car dyno-ed 6 months back on a different dyno (Mustange) 5 pulls also but with the below config: -No Uprev or prior tuning -Berk HFC instead of F.I. T.P. -Stock Intake instead of Stillen G3 Intake. -Stock HVR Intake Manifold instead of Motordyne M370.My results then was averaging 298 WHP. I'm aware that different dynos could be off by a bit and shouldn't be compared, but I am a little dissapointed with my results considering I modded the car quite a bit. I feel like all that mods w/a tune only increased the car 5WHP. Nut_N_Much likes this. __________________ Magnetic Black 2010 370z Scruffydog's Journal Last edited by scruffydog; 06-25-2013 at 04:34 PM.

06-25-2013, 04:38 PM	#2 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Go back to the mustang dyno and do some pulls. And if you're concerned about peak power, dump the M370. Just my opinion. Megan370z, SS_Firehawk and ubs234 like this. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

06-25-2013, 04:39 PM	#3 (permalink)
@NT Base Member Join Date: Apr 2013 Location: Socal Posts: 135 Drives: 2013 370Z PW M6 Rep Power: 12	Seems pretty good compared to other dyno results posted. You can't really compare the two results since they were on different dynos. scruffydog likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Full Stillen Bolt Ons + Berk Cats and UpRev Tune Results...	chuckd05	Tuning	38	10-17-2013 03:19 PM
Stillen Cat back exhaust and Uprev Dyno tune	Veyron	Intake/Exhaust	12	10-06-2013 11:03 PM
Stillen Gen 3 Intake / Motordyne M370 / Stillen Header	aleksp99	Wanted	0	05-27-2013 06:24 AM
UpRev tune on Mustang dyno with exhaust and intake.	Footloose301	Tuning	27	01-24-2013 08:56 AM
Dyno gt haus exhaust and stillen g3 intake	holmanyu	Intake/Exhaust	20	07-20-2010 02:48 PM

06-26-2013, 02:25 AM	#6 (permalink)
Alkatraz Base Member Join Date: May 2013 Location: Perth Posts: 215 Drives: 2008 Skyline 370GT Rep Power: 11	Dyno's only give you a number. If you want a number that will show that the mods have actually achieved something, then you should go to a drag strip before and after mods.