going square how did you like it?

newtonova822

Any issues with rubbing? turning rub, won't mind extreme parking lot turn limits lower.

How much are you lowered?

Right now I'm 1cm then plus 1/2"

Sounds like stock caster, camber toe might handle 1" which I could shoot for??

Would mod if had to but also want blizzak or other snow to fit.
what is the smallest tire that can fit 10.5? I could and will look up.

bkleeman

We run Enkei RPF1 18x10.5 square lowered with no rub - we do run spacers tho. Tires are Pirelli 305s. PM me - I can do a set of these new in 18x10.5 shipped for WAY less than 2K.

__________________
Brian Kleeman
Nissan 370Z - Pirelli World Challenge GTS #07
D.W.W. Motorsports | DXD Racing Clutches | SPL Parts | Aeromotions.com

synolimit

spacers???? my 18x10.5 +15 rpf1 is perfect in the back. what spacer do you need back there? also 18x10.5 +15 for the front is crazy offset anyways. am i missing something or do you have a different wheel? i only see 1 18x10.5 from enkie.

if i did a 10.5+15 on the front (again i only see 1 rpf1 in 18x10.5) where im flush now, itd be like putting a 23mm spacer on.

__________________
13 370z-

bkleeman

Same wheel front and back. We're only using spacers on one end, but I dont recall which - I'm 600 miles away from the car at the moment so I can't go look. Our rules allow for a 10.5 wheel up front and an 11 in the rear but Enkei doesn't make an 11 and that's the only offset for a 10.5 so that's what we went with. We go through a LOT of wheels so I wasn't going to switch over to a more expensive wheel just to get an 11.

The Pirellis we use have a rather tall sidewall and we can adjust ride height so we have a lot that we can play with regarding fit.

__________________
Brian Kleeman
Nissan 370Z - Pirelli World Challenge GTS #07
D.W.W. Motorsports | DXD Racing Clutches | SPL Parts | Aeromotions.com

synolimit

Wow. Well if you're 100% ill take your word. But that wheels like a 51mm spacer on the oem. I'm 23mm smaller and 1.2" lower with -1.5 camber and poke 1/8". Maybe you run -4 camber?

__________________
13 370z-

bkleeman

I dug through my pics...spacers on the rear, nothing up front. -3.0 to -3.5 camber on the front, -1.5 to -1.8 on the rear. Tires are 305/660 front, 305/680 rear.

__________________
Brian Kleeman
Nissan 370Z - Pirelli World Challenge GTS #07
D.W.W. Motorsports | DXD Racing Clutches | SPL Parts | Aeromotions.com

wstar

Off-topic divergence here, but any chance you guys will be selling whatever you made for hooking up ducting to the front rotors? I have the Stillen ones now, but more airflow would be nice and I suck at fabricating these kinds of things

I suspect this is due to series rules.

__________________
7AT Track Car!
Journal thread / Car setup details

GSS138

I too have 18x 10.5 Enkeis. I migt get into some rubbing issues once lowered as Mr Focus has already warned me, but I think it's about 8-10mm problem and can be solved with a simple fender roll if needed. I think my offsets are about 38 mm? Not sure, but I think PF01's are more like 25.

__________________
Current Mods: Vorpal Weapon +5.