One oil cooler is not enough

SunsetZ · 05-08-2014, 01:38 PM

I installed the largest Setrab cooler available for the Z and on the third 25 min session at PBIR it hit temps high enough to limit rpm. The 13 and 14 model year cars have a collar between the engine and oil filter that uses engine coolant to help "cool" the oil. I have a feeling this is actually heating the oil instead when a separate cooler is installed. I took it off to see if I could just put a return on it and not use that coolant thing, but there needs to be a new threaded fitting made to be able to connect the Setrab directly to the engine. Anyone know if these are available?

I turned the heater to full blast and that helped get some heat off the engine, but in Florida even with the windows down, that is not comfortable. Any ideas on how to have the heat set on max, and get that air directed outside the car instead?

JWillis72 · 05-08-2014, 02:34 PM

What temps were you seeing?

Sent from my iPhone using Tapatalk

kenchan · 05-08-2014, 02:35 PM

i can almost see florida hitting 135F and 95% humidity... from people doing that mod.

JWillis72 · 05-08-2014, 02:38 PM

Not even close but thanks for playing!

Sent from my iPhone using Tapatalk

DOOMMONKEY777 · 05-08-2014, 03:08 PM

Dont listen to dicks, any whoo there are few things u can do to get the heat out of the engine bay without wasting too much $, well there are rubber "bushings" that go along the window almost on the top of the engine bay it is there to keep ur hood from vibration when ur going over bumps, if u remove them 3 of them 2 small 1 long they let more air out of the engine.

If u still want more cooling i would suggest removing the under engine cover that will be a huge difference, but has a draw back dont drive at extremely high speeds cuz its letting air under ur car and well its unsafe.

And if you just want to pay 4 something that will work best well i suggest buying a vented hood, bigger radiator, or another cooler.

GL.

JWillis72 · 05-08-2014, 03:15 PM

He's tracking the car, leave the under tray on. My vented hood did help get more air through the coolers and lowered temps. Asking what temps he was seeing wasn't being a ****, temp go up on the track but that's not always a problem if they aren't to high. I track my car in Florida too and and I see 200-215 without any problems.

Sent from my iPhone using Tapatalk

Chuck33079 · 05-08-2014, 03:17 PM

Quote:

Originally Posted by DOOMMONKEY777

Dont listen to dicks, any whoo there are few things u can do to get the heat out of the engine bay without wasting too much $, well there are rubber "bushings" that go along the window almost on the top of the engine bay it is there to keep ur hood from vibration when ur going over bumps, if u remove them 3 of them 2 small 1 long they let more air out of the engine.

If u still want more cooling i would suggest removing the under engine cover that will be a huge difference, but has a draw back dont drive at extremely high speeds cuz its letting air under ur car and well its unsafe.

And if you just want to pay 4 something that will work best well i suggest buying a vented hood, bigger radiator, or another cooler.

GL.

The base of the windshield is a high pressure area. If you pull the weatherstripping out there's a chance that it will force air in at speed and you end up slowing the air coming through the oil cooler and radiator. Pulling the undertray is a bad idea too, both because it's the lower bumper support as well as the effect on aero. It will slow the airflow through the radiator and oil cooler.

theDreamer has a thread about vented hoods and temps. That's the first place to go to lower underhood temps.

JWillis72 · 05-08-2014, 03:17 PM

PBIR has a straight that's like .8 mile so he's seeing high speeds.

Sent from my iPhone using Tapatalk

JWillis72 · 05-08-2014, 03:44 PM

I tried pulling the weathstripping with no results on my car positive or negative that I could tell.

Sent from my iPhone using Tapatalk

Cbtech · 05-08-2014, 05:04 PM

How many Rows does the SETRAB have? you might want to look at a larger cooler if Setrab only goes to 15 row. Im looking at upping to a 34 Row cooler myself on the next oil change.

Shamu · 05-08-2014, 06:10 PM

What size setrab are you using? Have you considered putting larger aftermarket oil pan on the car? How about upgraded radiator too? What kind of oil are you using?

Rangerz · 05-08-2014, 06:20 PM

Quote:

Originally Posted by SunsetZ

I installed the largest Setrab cooler available for the Z and on the third 25 min session at PBIR it hit temps high enough to limit rpm. The 13 and 14 model year cars have a collar between the engine and oil filter that uses engine coolant to help "cool" the oil. I have a feeling this is actually heating the oil instead when a separate cooler is installed. I took it off to see if I could just put a return on it and not use that coolant thing, but there needs to be a new threaded fitting made to be able to connect the Setrab directly to the engine. Anyone know if these are available?

I turned the heater to full blast and that helped get some heat off the engine, but in Florida even with the windows down, that is not comfortable. Any ideas on how to have the heat set on max, and get that air directed outside the car instead?

2012 models and up have the factory cooler. I went with a setreb series 9 see thread I made if you want to delete your stocker and add an aftermarket one.
DIY 2012 25 row Setreb Series 9 Install & stock oil cooler delete

SunsetZ · 05-08-2014, 07:01 PM

It is the 34 row, the largest one offered by Z1, max temp was close to 270.

Zauskycop · 05-08-2014, 07:02 PM

Sure you have the largest? Check out Fast Intentions...larger, and deals with that oil "heater" issue also!

Tracy

Rangerz · 05-08-2014, 07:29 PM

Quote:

Originally Posted by Zauskycop

Sure you have the largest? Check out Fast Intentions...larger, and deals with that oil "heater" issue also!

Tracy

Ask Chuck what he uses he has a monster cooler and deals with Houston heat as well as being boosted.

I have yet to get over 220 with 25 min sessions. Its been cool here but, mine works great for what I do with it.

05-08-2014, 01:38 PM	#1 (permalink)
SunsetZ Base Member Join Date: Oct 2013 Location: Orlando Posts: 70 Drives: on the edge Rep Power: 11	One oil cooler is not enough I installed the largest Setrab cooler available for the Z and on the third 25 min session at PBIR it hit temps high enough to limit rpm. The 13 and 14 model year cars have a collar between the engine and oil filter that uses engine coolant to help "cool" the oil. I have a feeling this is actually heating the oil instead when a separate cooler is installed. I took it off to see if I could just put a return on it and not use that coolant thing, but there needs to be a new threaded fitting made to be able to connect the Setrab directly to the engine. Anyone know if these are available? I turned the heater to full blast and that helped get some heat off the engine, but in Florida even with the windows down, that is not comfortable. Any ideas on how to have the heat set on max, and get that air directed outside the car instead? __________________ 2014 370Z 6MT Sport Midnight Blue 2013 GT-R Aurora Flare Blue Pearl

05-08-2014, 02:35 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	i can almost see florida hitting 135F and 95% humidity... from people doing that mod. onzedge likes this.

05-08-2014, 03:08 PM	#5 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Sep 2010 Location: Crooklyn Posts: 1,008 Drives: 370Z 6psd-sport-pkg Rep Power: 20	Dont listen to dicks, any whoo there are few things u can do to get the heat out of the engine bay without wasting too much $, well there are rubber "bushings" that go along the window almost on the top of the engine bay it is there to keep ur hood from vibration when ur going over bumps, if u remove them 3 of them 2 small 1 long they let more air out of the engine. If u still want more cooling i would suggest removing the under engine cover that will be a huge difference, but has a draw back dont drive at extremely high speeds cuz its letting air under ur car and well its unsafe. And if you just want to pay 4 something that will work best well i suggest buying a vented hood, bigger radiator, or another cooler. GL. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

05-08-2014, 05:04 PM	#10 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	How many Rows does the SETRAB have? you might want to look at a larger cooler if Setrab only goes to 15 row. Im looking at upping to a 34 Row cooler myself on the next oil change. __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

05-08-2014, 06:10 PM	#11 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 19	What size setrab are you using? Have you considered putting larger aftermarket oil pan on the car? How about upgraded radiator too? What kind of oil are you using? __________________ Grant

05-08-2014, 02:34 PM	#2 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	What temps were you seeing? Sent from my iPhone using Tapatalk

05-08-2014, 02:38 PM	#4 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Not even close but thanks for playing! Sent from my iPhone using Tapatalk

05-08-2014, 03:15 PM	#6 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	He's tracking the car, leave the under tray on. My vented hood did help get more air through the coolers and lowered temps. Asking what temps he was seeing wasn't being a ****, temp go up on the track but that's not always a problem if they aren't to high. I track my car in Florida too and and I see 200-215 without any problems. Sent from my iPhone using Tapatalk

05-08-2014, 03:17 PM	#8 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	PBIR has a straight that's like .8 mile so he's seeing high speeds. Sent from my iPhone using Tapatalk

05-08-2014, 03:44 PM	#9 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I tried pulling the weathstripping with no results on my car positive or negative that I could tell. Sent from my iPhone using Tapatalk

05-08-2014, 07:01 PM	#13 (permalink)
SunsetZ Base Member Join Date: Oct 2013 Location: Orlando Posts: 70 Drives: on the edge Rep Power: 11	One oil cooler is not enough It is the 34 row, the largest one offered by Z1, max temp was close to 270. __________________ 2014 370Z 6MT Sport Midnight Blue 2013 GT-R Aurora Flare Blue Pearl Last edited by SunsetZ; 05-08-2014 at 07:09 PM.

05-08-2014, 07:02 PM	#14 (permalink)
Zauskycop Base Member Join Date: May 2011 Location: Hinckley IL Posts: 228 Drives: 2012 370Z, '16 Miata Rep Power: 13	Sure you have the largest? Check out Fast Intentions...larger, and deals with that oil "heater" issue also! Tracy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 10:09 AM
Z1 Oil Cooler Makes Oil Cooler	bmcd308	Engine & Drivetrain	16	08-20-2012 01:10 PM
[FOR SALE] AT Transmission Cooler with Setrab 19 Row cooler	zakimak	Parts for sale (Private Classifieds)	4	03-03-2012 11:44 AM