|
The diff cooler hoses is set-up for the stock diff cover. After talks with Daelen from MAM and Spencer from Z1. MAM are going to make hoses to fit the
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-22-2017, 08:58 PM
|
#2 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,579
Drives: 2011 Nismo GM 6M
Rep Power: 2684440   |
The diff cooler hoses is set-up for the stock diff cover. After talks with Daelen from MAM and Spencer from Z1. MAM are going to make hoses to fit the Z1 diff cover also. So I have the stock hose set-up for now. Dealen is going to send me the Z1 cover hoses soon as he gets them made.
 What I'm planning is. Only pulling the diff once. And doing the Z1 cover, tap the cover for temp sensor, the diff cooler, SPL diff bushings, a new LSD. I'm going to wire the pump, and fan separately. I'm doing away with my cubby hole. Making it into a gauge cluster. Planning on diff temp, water temp, oil pressure gauges, with switches for the diff fan, diff pump, and yaw sensor.
__________________
 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 05-22-2017 at 09:01 PM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Z1 Motorsports 25 row oil cooler install | falconfixer | DIY Section (Do-It-Yourself) | 5 | 05-30-2014 04:32 PM |
| 7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler | matcop | Engine & Drivetrain | 17 | 09-07-2013 10:09 AM |
| Akuma Motorsports Rear Diff Cooler | Kevin@AkumaMS | Engine & Drivetrain | 24 | 05-23-2013 08:01 PM |
| Z1 Motorsports Thermostatic Sandwich Plate kit (For Nissan Motorsports Oil Cooler) | Dustin@Z1 | Drivetrain/Engine | 3 | 06-08-2012 11:10 AM |
| DIY: GT Motorsports Oil Cooler Kit Install/Review | rackley | DIY Section (Do-It-Yourself) | 28 | 03-10-2010 10:38 AM |
153Likes
Threaded Mode
