370Z Carbon parts and an Introduction

MAMotorsports · 08-25-2015, 09:29 AM

Im going to start doing some little updates from around the shop, figure people always like an inside look.

Feel free to keep posting product ideas! As the build season starts to roll in we are always looking for more work haha.

This last weekend the guys where down at Texas Motor Speedway for FD, weekend did not end perfectly but given the circumstance a 3rd place is nothing to hang your head at.

We ended up getting taken out by a mechanical failure sadly, Chris came over the radio right before lining up against Yokoi and told us his clutch had been acting up. We knew there was nothing we could do about it at the time but the culprit was found today. An ongoing flywheel issue led to a broken input shaft which then led to destroyed clutch discs. The car would stall if not accelerating which is why the restart and the bump in turn 1 when the car stalled on a handbrake pull. Hate to get taken out by something out of our control but hey, that's racing!

Keep in mind this clutch sees the raw end of 1000hp and a heavy right foot so things happen haha.

08-25-2015, 09:29 AM	#19 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 18	Im going to start doing some little updates from around the shop, figure people always like an inside look. Feel free to keep posting product ideas! As the build season starts to roll in we are always looking for more work haha. This last weekend the guys where down at Texas Motor Speedway for FD, weekend did not end perfectly but given the circumstance a 3rd place is nothing to hang your head at. We ended up getting taken out by a mechanical failure sadly, Chris came over the radio right before lining up against Yokoi and told us his clutch had been acting up. We knew there was nothing we could do about it at the time but the culprit was found today. An ongoing flywheel issue led to a broken input shaft which then led to destroyed clutch discs. The car would stall if not accelerating which is why the restart and the bump in turn 1 when the car stalled on a handbrake pull. Hate to get taken out by something out of our control but hey, that's racing! Keep in mind this clutch sees the raw end of 1000hp and a heavy right foot so things happen haha. Apollo8642 likes this. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: 370z seibon /evo r carbon fiber parts	outkazt	Northern California Region	3	06-25-2015 08:18 PM
EVO-R 370Z Dry Carbon Interior parts	EVOR	Exterior & Interior	17	08-29-2012 07:10 PM
09-10 Nissan 370Z Seibon Carbon Fiber Parts	ERZperformance	Body Interior/Exterior	1	06-26-2011 08:27 PM
Carbon Parts???????	NotmyGTR	Nissan 370Z General Discussions	7	05-09-2009 12:42 PM