Nissan 370Z Forum
Page 17 of 251 « First 71516 17 18192767117 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY) (http://www.the370z.com/nissan-370z-general-discussions/91468-what-did-you-do-your-z-today-vi-topic-discussion-only.html)

Zerocool 07-22-2014 10:51 PM
Wondering what to do next.

b15 07-22-2014 11:05 PM
Cleaned up the Z after a 400mile cruise with some other Z owners. Noticed I have about 5,000 more rock chips on the bumper and hood. Have to love Nissan paint quality, or lack thereof.

onzedge 07-23-2014 05:39 AM
Quote:
Originally Posted by Gadgetech (Post 2905073)
Nothing with the Z but I did turn 40 today!
Happy Birthday!!! :tiphat:

onzedge 07-23-2014 05:40 AM
I ordered SPL sway bar end links front and rear today.

aszyd 07-23-2014 07:37 AM
Day 3 with no Z. The withdrawal is kicking in. At first, I was OK with the Rogue, now I am starting to notice it's faults. Aside from the weak engine and CVT, it could really use a wheel and tire package, higher spring rates, thicker sways, and more supportive seats. There is also this nasty rattle behind the center console. It sounds like plastic on plastic. It's not the air vents. The car only has 3K on it, I would be none too pleased if I had purchased it.

Still waiting on the bad news that they can't source another TE37. Just give me MSRP for the rim and I will buy a set of M590s...

Boomer370 07-23-2014 07:41 AM
Quote:
Originally Posted by Luciano13 (Post 2904456)
Got her some new wheels yesterday:tup:

( Click to show/hide )


Oh Mer Ghawd!!!

Nice wheels brother!

Can't wait to see them in person!

Welcome to the Works family!! :tup:

Brad Edwards 07-23-2014 10:33 AM
Yes, There seams to be a requirement for just about everything in California that the legal citizens have to abide by, but if you are here il-legally, Free Reign

Bananaz 07-23-2014 10:36 AM
Off topic but do you have to remove the abs bracket to remove the clutch master? Couldn't seem to wiggle it out

JARblue 07-23-2014 11:00 AM
Quote:
Originally Posted by Bananaz (Post 2905475)
Off topic but do you have to remove the abs bracket to remove the clutch master? Couldn't seem to wiggle it out
No, but there's not exactly a lot of room in there. It took me and my fat hands a good bit of time to maneuver the old one out and the new one in. And that damn ABS bracket is the reason we can't use aftermarket CMC :mad:

kenchan 07-23-2014 11:07 AM
Quote:
Originally Posted by Fountainhead (Post 2904700)
Don't forget to have the weights replaced/tires rebalanced!
:confused: huh?

davwak 07-23-2014 11:18 AM
Jul 21, 2014 FAST INTENTIONS SIMI VALLEY CA
300.00 USD @ 1.1024
330.72

Deposit made. And now the wait begins. :eekdance:

jpkirk 07-23-2014 11:32 AM
Quote:
Originally Posted by Gadgetech (Post 2905073)
Nothing with the Z but I did turn 40 today!
Happy bday. Time for another trip around the sun. We need a space capable 370Z.

jpkirk 07-23-2014 11:34 AM
Quote:
Originally Posted by Fountainhead (Post 2904700)
Don't forget to have the weights replaced/tires rebalanced!
Quote:
Originally Posted by kenchan (Post 2905525)
:confused: huh?
Cuz, you know, dirt.
:ugh2:

kenchan 07-23-2014 12:56 PM
Quote:
Originally Posted by jpkirk (Post 2905555)
Cuz, you know, dirt.
:ugh2:
why you calling me a dirt? :mad:


anyway, im going to be masking up my nismo's valvestem area tonight.
dont want scratches from when the tire store removes the old valves and
install new RAY's stems. that's right RAY'S stems. cost me a fortune. :ugh:

jpkirk 07-23-2014 02:41 PM
Quote:
Originally Posted by kenchan (Post 2905660)
why you calling me a dirt? :mad:


anyway, im going to be masking up my nismo's valvestem area tonight.
dont want scratches from when the tire store removes the old valves and
install new RAY's stems. that's right RAY'S stems. cost me a fortune. :ugh:
Don't be :mad: Be happy ... Pharrell Williams - Happy (Official Music Video) - YouTube

dirt, the beginning of life, you know... happy... because I'm happy eh?

Ray's stems! How many extra hp?

kenchan 07-23-2014 02:43 PM
Quote:
Originally Posted by jpkirk (Post 2905836)
Don't be :mad: Be happy ... Pharrell Williams - Happy (Official Music Video) - YouTube

dirt, the beginning of life, you know... happy... because I'm happy eh?

Ray's stems! How many extra hp?

$90 worth! :mad:

Dztigereyes 07-23-2014 02:55 PM
4 Attachment(s)
I got the windows tinted, and put on the personalized plate!:happydance:

aszyd 07-23-2014 02:57 PM
Quote:
Originally Posted by kenchan (Post 2905837)
$90 worth! :mad:
It's ok, I spent like $50 on some Rays stickers.

kenchan 07-23-2014 02:58 PM
Quote:
Originally Posted by aszyd (Post 2905847)
It's ok, I spent like $50 on some Rays stickers.
wat do you think about $75 ings+1 plastic chrome emblems? :ugh2:

aszyd 07-23-2014 03:31 PM
Quote:
Originally Posted by kenchan (Post 2905850)
wat do you think about $75 ings+1 plastic chrome emblems? :ugh2:
At least they are plastic!

My Tomei exhaust came with a plastic chrome emblem.

FairladyZ10PG 07-23-2014 03:46 PM
Quote:
Originally Posted by aszyd (Post 2905847)
It's ok, I spent like $50 on some Rays stickers.
I make my own stickers :ugh2:

kenchan 07-23-2014 03:50 PM
Quote:
Originally Posted by aszyd (Post 2905864)
At least they are plastic!

My Tomei exhaust came with a plastic chrome emblem.
:D haha, yah i guess. it covers a scuff on my arse. i mean my Z's arse. :ugh:



Quote:
Originally Posted by FairladyZ10PG (Post 2905868)
I make my own stickers :ugh2:
sharpie + clear packing tape? :ugh2:

FairladyZ10PG 07-23-2014 04:03 PM
Quote:
Originally Posted by kenchan (Post 2905873)
:D haha, yah i guess. it covers a scuff on my arse. i mean my Z's arse. :ugh:





sharpie + clear packing tape? :ugh2:
lol No I use sharpie + brown paper bag :p

kenchan 07-23-2014 07:05 PM
Nismos are now masked up. :p

onzedge 07-23-2014 07:17 PM
Quote:
Originally Posted by kenchan (Post 2906010)
Nismos are now masked up. :p
Are they ready for plasti-dip? :icon17:

kenchan 07-23-2014 08:46 PM
Quote:
Originally Posted by onzedge (Post 2906022)
Are they ready for plasti-dip? :icon17:
:eekdance: :rofl2: noooo~~~

onzedge 07-23-2014 08:59 PM
Quote:
Originally Posted by kenchan (Post 2906135)
:eekdance: :rofl2: noooo~~~
I am not disappointed. I have to be honest.

JARblue 07-23-2014 09:12 PM
3 Attachment(s)
Installed new intakes filters. It's a subtle change aesthetically, but I dig it :yum:

Before:
( Click to show/hide )


After:
( Click to show/hide )

Bananaz 07-23-2014 11:22 PM
Took that damn clutch master out, some goodies from Zspeed will be here tomrrow ;)

Gonna put in the new master and see if that solves the problem. If not, pulling the trans!

Bossless1 07-24-2014 01:12 PM
Got some goodies from the UPS guy today... F.I. HFC's and some ultra blue visor led's to go with my all red led interior :-) Now to do the work...

onzedge 07-24-2014 03:50 PM
Quote:
Originally Posted by nomodsjk (Post 2907132)
I got a reckless driving ticket racing (and beating) a 6.2 liter Ls in the form of a Pontiac g8 gxp with headers Cai and custom tune. We both got the same ticket when we pulled into a shopping center to talk car. Cop heard it and saw the end but did not get us on radar. I guess if you build a race car and refuse to loose you have to accept the consequences. I feel like a complete jackass but at least I won both the dig and a 20 roll. Other guy lost and got the ticket lol. By the way this was not in town and we thought no one else was around at least it appeared that way until we saw the flashing lights. Guess I'll have to bite the bullet get a set of drag radials and leave the itch on the track. Either that or loose my license
You are quite the genius. Street racing posts are positively prohibited here -- something you agreed to when you signed up for the forum. It is also amazingly stupid behavior in the first place. You are a true example to us all.

Reported.

kenchan 07-24-2014 05:40 PM
mmmm... just got these wrapped. :yum: and check out my ripoff RAYs metal valve stem! :D

and put my nismo's back on my ride. :icon17: haha

http://www.the370z.com/members/kench...80732-re11.jpg

madwi 07-24-2014 06:57 PM
Quote:
Originally Posted by kenchan (Post 2907231)
mmmm... just got these wrapped. :yum: and check out my ripoff RAYs metal valve stem! :D

and put my nismo's back on my ride. :icon17: haha

http://www.the370z.com/members/kench...80732-re11.jpg
Let us know how you like them. I liked them personally (in '08 haha), not sure how they stack up to other tires of today. :tup: :driving:

Masterbeatty 07-24-2014 08:02 PM
Received my spl diff bushings today!!! Now I get to buy new tools :)

onzedge 07-24-2014 08:14 PM
Quote:
Originally Posted by Masterbeatty (Post 2907364)
Received my spl diff bushings today!!! Now I get to buy new tools :)
:tup:

JARblue 07-24-2014 09:31 PM
Took the semi-long way home to enjoy some hill country twisties after a 450 mile day in the Z :driving:

kenchan 07-24-2014 09:38 PM
Quote:
Originally Posted by madwi (Post 2907303)
Let us know how you like them. I liked them personally (in '08 haha), not sure how they stack up to other tires of today. :tup: :driving:
These are the 200AA revisions.

maizenblue 07-24-2014 10:10 PM
Baked the headlights and opened them up. Painting them black tomorrow

chops 07-24-2014 11:21 PM
Quote:
Originally Posted by maizenblue (Post 2907492)
Baked the headlights and opened them up. Painting them black tomorrow
you sir have bigger balls than i. ive been wanting to do this for so long, but cant bring myself to possibly melt them and blow a G buying new ones :bowrofl:

axmea? 07-24-2014 11:40 PM
Quote:
Originally Posted by maizenblue (Post 2907492)
Baked the headlights and opened them up. Painting them black tomorrow
After getting mine done, I just realized how great a mod this is and do not understand why I waited for a long time. Kudos for the DIY. Any plans to put halos while you have it open?


All times are GMT -5. The time now is 05:26 AM.
Page 17 of 251 « First 71516 17 18192767117 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2