http://www.the370z.com/diy-section-d...ights-mod.html

me no smart enuff to figure this out on own, I followed the above DIY!

I was able to pry the DRL plug apart but still pulled the wire out leaving the pin in on the tan wire so just cut the red one (the counter stopped with one second before the warhead went off!) I'll not be going back to DRLs off so no worries.
They are on whenever car is running, headlights on/off independently by switch as before.

I already had 30% film over the DRLs to go with my blacked out theme so that they won't be too bright at night.

Has anyone ever tried using yellow film or krylon yellow glass paint on their DRL's? I tried searching far and wide, with no luck...only found 1 pic on google

Im a fan of yellow fogs and have that on my 4door but...was wondering if yellow DRL would look good

Sent from my SM-G860P using Tapatalk

Looking forward to see this man!

easy to try, yellow window film, $6.99 on Amazon, I just used scrap window tint and quick trim with a razor knife

I joked with Mrs burntz that I was going to alternate red and green films on them for xmas

Hey BlueBatmanMobile; group buy on xmas DRL tints??

:icon18:

^^ lol @ christmas idea....my neighbors across the street have green/red door lights and they haven't changed since last christmas

I think im gonna try the yellow DRL soon...have to get some film. I'll just peel it off if its not looking good :tub:

Sent from my SM-G860P using Tapatalk

http://i334.photobucket.com/albums/m...ps5wf95ve3.jpg

What I was doing with prior Z 6/4/15! (Was scrolling thru my pics and saw this)

It's pretty obvious that I am a master of wise decision making.

http://i334.photobucket.com/albums/m...K/cracked3.jpg

more oldies, after a day at Sebring with too aggressive pads ( NO wear on the pad at all!)

(sorry for the thread drift, just sitting on couch cuddling pugs, waffles and coffee)
http://i334.photobucket.com/albums/m...K/kayak025.jpg

A kayak I made, aerodynamically tested to 65 mph!

No more open differential peg legging!

http://images.tapatalk-cdn.com/15/11...1fa85a21ce.jpg

I know I've seen this car somewhere...

Are you in Maryland? Lol

Sent from my SM-G860P using Tapatalk

Yo, Tommy which diff did you get?

Sent from my SM-N910P using Tapatalk

Hooked up the trickle charger and threw on the cover this morning. Snow and a low of 9* expected for tomorrow :(

Happy Xmas the370Z...

So I ordered red and green tint (12"x48") and will have way too much so if any one wants a strip of each PM me your address and I'll mail them out.

Thinking on it I'll pick 20 names randomly off the list of PMs I have when they're ready to go.

[there ya go a ~10$ stamp limit which apparently quantifies my Xmas spirit of giving]

one last cruise tonight, taking the gf out on a date. coming dt for dinner then drive around a bit. will be a bit chilly so i need to be careful on the bends.

then storage on sunday... everything is prep'd just need to top up the gas and stabil it.

connect trickle charger, over-inflate tires, block the tires, block the pipes, open up a box of baking soda and then let out a long drawn out sigh.

I received my custom plates yesterday. Bought some stuffs at the Home Depot, come back home and made a plate relocation kit myself. I'm happy with the result :icon18:

https://farm6.staticflickr.com/5727/...87cb0eef_b.jpg

https://farm6.staticflickr.com/5672/...9dbc734b_b.jpg

^^ looks nice. Is that chicken wire? Lol

Sent from my SM-G860P using Tapatalk

Added a little carbon fiber bling

^that gives me another idea. Looks good BTW!

I want to try clearcoating all the black parts under the hood....

Sent from my SM-G860P using Tapatalk

:tiphat:

New Tire Rack rubber showed up in my driveway from UPS yesterday!!! (255/285x19 pilot super sports)

Now I just need to pop them on my summer rims while I'm still running the winter rims. (PSS A/S)

I've never tried the PSS. They were pricey, but I hear good things. Its going to be a long winter waiting to bolt those bad boys on.

Just an oem VLSD. Cheaper route for now but anything is better than open diff! Just need to order myself the oem stub shaft axle and some fluid and I'm golden :tup:

Tucked my baby in for the winter today.

Oil change and fuel stabilizer, as well as the above.

Doing rear brakes(supra) and playing with wheels:tup:


[IMG]http://i289.photobucket.com/albums/l...ps2s9fywar.jpg[/IMG]

[IMG]http://i289.photobucket.com/albums/l...psrlxbjpxn.jpg[/IMG]

[IMG]http://i289.photobucket.com/albums/l...pstfljrlgf.jpg[/IMG]

[IMG]http://i289.photobucket.com/albums/l...psnyrfcyfq.jpg[/IMG]

[IMG]http://i289.photobucket.com/albums/l...psbksex5z6.jpg[/IMG]

:drool:

OMG! More pics of that supra, please :yum:

6 speed single turbo, Borg Warner s366, pro EFI stand alone ecu, 500 hp for now :driving: 4 inch straight pipe exhaust


[IMG]http://i289.photobucket.com/albums/l...psebmrfnyt.jpg[/IMG]

4 inch str8 pipe? :drool:

Any exhaust clips? MOAR Supra please! Lol

Sent from my SM-G860P using Tapatalk

Sorry I don't have any exhaust clip right now,But will make one soon.

Re-attached the front air dam after scrubbing it on a bottom out and half tearing it off. Then took the Z for a rip roar around Mercer Island, with the wife hollering about the g-forces hurting her bruises - from falling off her mountain bike yesterday. Beautiful day here in Washington state.

Washed, clay barred, and waxed the Z yesterday to get it ready for storage this week. I bought it used (2011), and can tell it's never been clay barred before! It makes such a difference.

Sent from my XT1096 using Tapatalk

Installed the Axxess interface for my head unit. Now the steering wheel buttons work.
https://farm1.staticflickr.com/667/2...e0faae93_c.jpg


Also installed SPC front/rear camber kit and Powertrix SS coilovers. The front took about 3hrs, then my friend came and we had a few beers. Then I didn't know how I stripped one of the 12mm nut on top of the rear strut. Now it's a pain in the *** to get it out. I tried everything I could but it didn't move. :eekdance: I have to take it to the shop tomorrow to get the rear done.
Lesson learned : Don't drink and work at the same time :icon17:

https://farm1.staticflickr.com/767/2...bc8d40fb_c.jpg

parked the Z yesterday. longest part was waiting for the pump to inflate the tires.

then i stepped into my car and got the fob low battery signal.

need to swap it out this week

Ohhhhh my Lord :drool: I want your Supra and your Forgestar wheels hahahaa! Damn dude both cars looking insane :tup:

This weekend... Did an oil change, drover her up one last time for a fill-up / Sta-bil + over inflate on the tires... performed a full detail and tucked her away for the long-cold winter. :crying::crying:

http://www.the370z.com/members/wheel...way-winter.jpg

Out with the ARC
https://farm1.staticflickr.com/774/2...7817efdb57.jpg[/url]

In with the Tommy Kaira
https://farm6.staticflickr.com/5742/...23396f6c12.jpg
https://farm6.staticflickr.com/5783/...7e387f780a.jpg

I did a lot of cruising this weekend :)

Filled up on 93 octane for $1.42 a gallon.

:eek2:

$1.42...........wtf!!!

Yeah, it's because of all the Kroger points I earned from buying gift cards for Christmas. I saved $.80 per gallon. :tup:

In Memphis, Kroger gas stations use Shell fuel, so I feel confident filling up there.

started looking for the best deal on a 2015 nismo bumper