What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

JARblue · 06-27-2013, 08:48 AM

Quote:

Originally Posted by Sh0velMan

Drove it to work... It was noisy, bumpy and loud. And awesome.

now you gotta change the "Drives:" part of your profile tho

Sh0velMan · 06-27-2013, 08:51 AM

Quote:

Originally Posted by JARblue

now you gotta change the "Drives:" part of your profile tho

And fix the statement since I put Noisy and Loud in there but forgot HOT.

TheW3r3W0lf · 06-27-2013, 11:13 PM

It's been too hot to do much with the Z but finally gave in and had a GTHaus Meisterschaft cat-back system installed today, did Z1 intake tubes, put in rear LED turn signals with resistors as well as installed SPC camber kits. I had a pile of parts waiting to go into the car! I was going to set up an appointment to have the tune updated for the exhaust but I am not so sure I can handle how insane it is! I have been reading threads to see if anyone had done just the axle back kit with better results but no dice. There may be a Meisterschaft kit for sale soon!

Sh0velMan · 06-28-2013, 11:43 AM

Quote:

Originally Posted by TheW3r3W0lf

It's been too hot to do much with the Z but finally gave in and had a GTHaus Meisterschaft cat-back system installed today, did Z1 intake tubes, put in rear LED turn signals with resistors as well as installed SPC camber kits. I had a pile of parts waiting to go into the car! I was going to set up an appointment to have the tune updated for the exhaust but I am not so sure I can handle how insane it is! I have been reading threads to see if anyone had done just the axle back kit with better results but no dice. There may be a Meisterschaft kit for sale soon!

LOL what did you expect? Didn't watch many videos on Youtube huh?

TheW3r3W0lf · 06-28-2013, 12:02 PM

Quote:

Originally Posted by Sh0velMan

LOL what did you expect? Didn't watch many videos on Youtube huh?

I watched them all and it's very hard to grasp the scale of how loud it really is from a youtube video!

onzedge · 06-28-2013, 12:41 PM

It's time to order my Stillen intake for the new Z.

w0rM · 06-29-2013, 07:32 PM

Quote:

Originally Posted by onzedge

it's time to order my stillen intake for the new z.

yes!

dmhenderson · 06-29-2013, 07:35 PM

Quote:

Originally Posted by onzedge

It's time to order my Stillen intake for the new Z.

Wait a few weeks and buy mine

Quote:

Originally Posted by w0rM

In for a review of these when you get them.

Also interested

w0rM · 06-29-2013, 07:44 PM

Quote:

Originally Posted by dmhenderson

Wait a few weeks and buy mine

I might be interested in that. Got a price in mind yet?

synolimit · 06-28-2013, 05:55 PM

Finished washer fluid bottle relocation.

igv · 06-29-2013, 01:40 AM

Got a screw in my left rear, not sure if it punched the tire though. Nice surprise before work

Going to the shop tomorrow

Mozen · 06-29-2013, 02:14 AM

So i finally decided that i needed to repaint my roll cage. I pulled off the trunk pieces to look at the welds and inspect the area and found some rust at the welds which had me concerned. Really i was lazy when it went in and decided to be cheap so i just used the good o'l rattle can.

Anyways, after a trip to OBI (German Home Depot) with my German friend to translate what was what, i found a good metal primer and a solid gloss white that's intended for kitchen appliances and such. On top of that i used some TCP global Metal Etch since i had heard some great things about it.

Long story short...i stripped the bars back down and then used a 50grit sand paper to lightly scuff them...then used the etch. After that primer...and then the coats of white. As it stands now the second coat of white is drying and ill probably have to use a third to get it as thick as i want for protection.

We are having a bit of a cold front here in Germany...temps dropped back to the 50s, so my solution to get it to dry faster is to turn the car on and crank the heat to 90 and let it run for 5-10min then turn it off and leave the car for an hour or so closed up. After that i repeat the process....again and again lol.

Nailzs · 06-29-2013, 06:40 AM

Wash, wax and Dr. ColorChipped

yesterday.

chrischhorn · 06-29-2013, 01:02 PM

Ordered a new set of tires finally. My other ones aren't worn out.......they just sucked lol. At least for my driving style but they have great wear! Decided to go with a 275/35/18 and a 295/35/18 on the BFGoodrich Rivals. Rears are to be released on the 20th though so I still need to wait a few weeks.

w0rM · 06-29-2013, 07:33 PM

Quote:

Originally Posted by chrischhorn

Ordered a new set of tires finally. My other ones aren't worn out.......they just sucked lol. At least for my driving style but they have great wear! Decided to go with a 275/35/18 and a 295/35/18 on the BFGoodrich Rivals. Rears are to be released on the 20th though so I still need to wait a few weeks.

In for a review of these when you get them.

06-28-2013, 12:41 PM	#6 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684737	It's time to order my Stillen intake for the new Z. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

06-28-2013, 05:55 PM	#10 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3390	Finished washer fluid bottle relocation. __________________ 13 370z-

06-29-2013, 02:14 AM	#12 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 19	Painting roll cage So i finally decided that i needed to repaint my roll cage. I pulled off the trunk pieces to look at the welds and inspect the area and found some rust at the welds which had me concerned. Really i was lazy when it went in and decided to be cheap so i just used the good o'l rattle can. Anyways, after a trip to OBI (German Home Depot) with my German friend to translate what was what, i found a good metal primer and a solid gloss white that's intended for kitchen appliances and such. On top of that i used some TCP global Metal Etch since i had heard some great things about it. Long story short...i stripped the bars back down and then used a 50grit sand paper to lightly scuff them...then used the etch. After that primer...and then the coats of white. As it stands now the second coat of white is drying and ill probably have to use a third to get it as thick as i want for protection. We are having a bit of a cold front here in Germany...temps dropped back to the 50s, so my solution to get it to dry faster is to turn the car on and crank the heat to 90 and let it run for 5-10min then turn it off and leave the car for an hour or so closed up. After that i repeat the process....again and again lol. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

06-29-2013, 06:40 AM	#13 (permalink)
Nailzs Enthusiast Member Join Date: Aug 2012 Location: Florida Posts: 395 Drives: 13 370Z 7at Sp Tour Rep Power: 13	Wash, wax and Dr. ColorChipped yesterday. __________________ 3M Crystalline Tint

06-29-2013, 01:02 PM	#14 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 17	Ordered a new set of tires finally. My other ones aren't worn out.......they just sucked lol. At least for my driving style but they have great wear! Decided to go with a 275/35/18 and a 295/35/18 on the BFGoodrich Rivals. Rears are to be released on the 20th though so I still need to wait a few weeks. __________________ R.I.P. 8/01/13 1SlowZ One day I'll have another.... Last edited by chrischhorn; 06-29-2013 at 01:20 PM.

06-27-2013, 11:13 PM	#3 (permalink)
TheW3r3W0lf Base Member Join Date: Feb 2013 Location: Arizona Posts: 111 Drives: 2012 Z34 Nismo- SOLD Rep Power: 13	It's been too hot to do much with the Z but finally gave in and had a GTHaus Meisterschaft cat-back system installed today, did Z1 intake tubes, put in rear LED turn signals with resistors as well as installed SPC camber kits. I had a pile of parts waiting to go into the car! I was going to set up an appointment to have the tune updated for the exhaust but I am not so sure I can handle how insane it is! I have been reading threads to see if anyone had done just the axle back kit with better results but no dice. There may be a Meisterschaft kit for sale soon!

06-29-2013, 01:40 AM	#11 (permalink)
igv Base Member Join Date: Apr 2013 Location: California Posts: 5 Drives: 370Z Rep Power: 13	Got a screw in my left rear, not sure if it punched the tire though. Nice surprise before work Going to the shop tomorrow

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5D3 Discussion	FrancoPhoto	Photography	6	07-09-2012 12:08 AM
[Off Topic,GTA]Who dares to drive in the snow tonight with their Z?	Da.Menace	Canada	11	02-05-2011 05:43 PM
Double Din Dvd/Nav Feedback Topic	Carbon_z	Audio & Video	7	11-19-2010 11:10 AM
on the topic of oil ??	sonic370	Nissan 370Z General Discussions	5	07-17-2010 09:50 PM
Lounge (Off Topic) Rules	AK370Z	The Lounge (Off Topic)	0	09-23-2008 07:19 PM