What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

fonzo179 · 05-21-2013, 11:53 AM

Put the L Brackets on my woofer box...no more woofer roll at start/stop !!!

JARblue · 05-22-2013, 09:13 AM

I picked up my Z from Joe @ Dynotronics last night with the new EcuTek tune. Additional tuning and dyno will come later, but here is my review of the initial results.

First impressions of EcuTek tune on nearly stock Z

Big thanks to Joe!! It's been a great experience working with him. He's a busy guy, but that's to be expected because he clearly knows his $hit. I'm looking forward to continuing the relationship as more features are released and the adjustments are fine tuned

nmjaxx9 · 05-22-2013, 12:39 PM

Cleannnnn her off and detail.

Zomg · 05-22-2013, 12:49 PM

I need to go and detail my machine today for tonights relief fund raiser car meet in dallas.

chrischhorn · 05-22-2013, 01:55 PM

Well yesterday I was busy.
-Re-attached my front lip. Made it look MUCH cleaner and not as shotty as my last DIY job lol. Also needed to change out some of the 3M tape as the first time around it was not sticking as well as I had hoped.
-While I had the bumper off, did the DIY CAI mod also using dryer duct and the making the fangs useful. To say the least, my intake temps dropped tremendously. I run K&N Typhoon intake and my temps were about 35-50 higher then ambient air temps. Yesterday after driving around with it, my air temps were at a MAX 15 degrees higher then ambient air temps at cruising speeds. Worth the $20 if you don't have a CAI IMO. I need to still change it up a bit to make it look a little cleaner.
-Dropped my rear diff off at the transmission shopped to get assembled with the Quaife LSD and 4.08 gears installed. Probably the thing I'm most excited about.
-Washed and waxed her to finish the day off and enjoyed some friends at a car meet. Good day off I'd say

roy'sz · 05-22-2013, 02:49 PM

Quote:

Originally Posted by chrischhorn

Well yesterday I was busy.
-Re-attached my front lip. Made it look MUCH cleaner and not as shotty as my last DIY job lol. Also needed to change out some of the 3M tape as the first time around it was not sticking as well as I had hoped.
-While I had the bumper off, did the DIY CAI mod also using dryer duct and the making the fangs useful. To say the least, my intake temps dropped tremendously. I run K&N Typhoon intake and my temps were about 35-50 higher then ambient air temps. Yesterday after driving around with it, my air temps were at a MAX 15 degrees higher then ambient air temps at cruising speeds. Worth the $20 if you don't have a CAI IMO. I need to still change it up a bit to make it look a little cleaner.
-Dropped my rear diff off at the transmission shopped to get assembled with the Quaife LSD and 4.08 gears installed. Probably the thing I'm most excited about.
-Washed and waxed her to finish the day off and enjoyed some friends at a car meet. Good day off I'd say

Im at 7-8 over ambient temp...not bad

DLSTR · 05-22-2013, 03:01 PM

Cold day here in Germany. Spring? Summer? Not quite yet. Sort of there. Drove to get my hair buzzed and off to the gym. Found a nice gap on the Autobahn for some 3 digit fun! I just wish is would stay a touch warmer.

Pintsize725 · 05-22-2013, 03:12 PM

Quote:

Originally Posted by DLSTR

Cold day here in Germany. Spring? Summer? Not quite yet. Sort of there. Drove to get my hair buzzed and off to the gym. Found a nice gap on the Autobahn for some 3 digit fun! I just wish is would stay a touch warmer.

You've been M.I.A. lately sir.

Footloose301 · 05-22-2013, 03:40 PM

Quote:

Originally Posted by fonzo179

Put the L Brackets on my woofer box...no more woofer roll at start/stop !!!

I think strips of Velcro would be much better

MavRick · 05-22-2013, 05:21 PM

Finally....i can post in this thread. hahahaha....

LED interior with GT-R map light...

Shift knob from Chris at WC Lathe Werks...

Changing that long *** antenna out and attempting the DRL/switchback mode, on friday. wish me luck...

CDepp · 05-22-2013, 05:29 PM

Quote:

Originally Posted by MavRick

Finally....i can post in this thread. hahahaha....

LED interior with GT-R map light...

Shift knob from Chris at WC Lathe Werks...

Changing that long *** antenna out and attempting the DRL/switchback mode, on friday. wish me luck...

Nice. Where'd you go to get your LEDs ?

MavRick · 05-22-2013, 05:46 PM

Quote:

Originally Posted by CDepp

Nice. Where'd you go to get your LEDs ?

thanx. i got em from http://store.ijdmtoy.com/. simple 194 bulbs. also picked up the switchbacks from them, as well...

SAmilitaryman · 05-22-2013, 06:49 PM

Changed the oil, filter, and drain plug.
Pit on stainless steel brake lines.
Flushed and put in new brake fluid.

Did it in 4 hours using the DIY section here. Love working on my car

Sent from my DROID RAZR HD using Tapatalk 2

red2010z · 05-22-2013, 06:53 PM

Not home to drive it. *Brother drove it to a local mechanic*

Get installed

-Swifts
-Camber Kit
-CV3 All around on PSS with spacers
-Hood Struts
-Front lip

MavRick · 05-22-2013, 07:18 PM

Quote:

Originally Posted by red2010z

Not home to drive it. *Brother drove it to a local mechanic*

Get installed

-Swifts
-Camber Kit
-CV3 All around on PSS with spacers
-Hood Struts
-Front lip

I need pics of those Vossens in my life, man!!!!

05-22-2013, 09:13 AM	#4442 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I picked up my Z from Joe @ Dynotronics last night with the new EcuTek tune. Additional tuning and dyno will come later, but here is my review of the initial results. First impressions of EcuTek tune on nearly stock Z Big thanks to Joe!! It's been a great experience working with him. He's a busy guy, but that's to be expected because he clearly knows his $hit. I'm looking forward to continuing the relationship as more features are released and the adjustments are fine tuned __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

05-22-2013, 01:55 PM	#4445 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 16	Well yesterday I was busy. -Re-attached my front lip. Made it look MUCH cleaner and not as shotty as my last DIY job lol. Also needed to change out some of the 3M tape as the first time around it was not sticking as well as I had hoped. -While I had the bumper off, did the DIY CAI mod also using dryer duct and the making the fangs useful. To say the least, my intake temps dropped tremendously. I run K&N Typhoon intake and my temps were about 35-50 higher then ambient air temps. Yesterday after driving around with it, my air temps were at a MAX 15 degrees higher then ambient air temps at cruising speeds. Worth the $20 if you don't have a CAI IMO. I need to still change it up a bit to make it look a little cleaner. -Dropped my rear diff off at the transmission shopped to get assembled with the Quaife LSD and 4.08 gears installed. Probably the thing I'm most excited about. -Washed and waxed her to finish the day off and enjoyed some friends at a car meet. Good day off I'd say __________________ R.I.P. 8/01/13 1SlowZ One day I'll have another....

05-22-2013, 05:21 PM	#4450 (permalink)
MavRick Base Member Join Date: Feb 2013 Location: atlanta Posts: 66 Drives: 2010 Roadster 6MT Rep Power: 12	Finally....i can post in this thread. hahahaha.... LED interior with GT-R map light... Shift knob from Chris at WC Lathe Werks... Changing that long * antenna out and attempting the DRL/switchback mode, on friday. wish me luck... __________________ Miss you, Pops...**

05-22-2013, 06:49 PM	#4453 (permalink)
SAmilitaryman Base Member Join Date: Jan 2013 Location: san antonio, tx Posts: 168 Drives: 09 Nissan black 370z Rep Power: 12	Changed the oil, filter, and drain plug. Pit on stainless steel brake lines. Flushed and put in new brake fluid. Did it in 4 hours using the DIY section here. Love working on my car Sent from my DROID RAZR HD using Tapatalk 2 GaleForce likes this.

05-22-2013, 06:53 PM	#4454 (permalink)
red2010z Track Member Join Date: Apr 2013 Location: Texas/North Carolina Age: 38 Posts: 587 Drives: '10 Red B/S/M Rep Power: 13	Not home to drive it. Brother drove it to a local mechanic Get installed -Swifts -Camber Kit -CV3 All around on PSS with spacers -Hood Struts -Front lip __________________ AGENCY K&N SWIFT CSF EVO-R VOSSEN MICHELIN Z1 JVC ZENCLOSURE JLW3 JVC

05-22-2013, 12:39 PM	#4443 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 25	Cleannnnn her off and detail.

05-22-2013, 12:49 PM	#4444 (permalink)
Zomg Base Member Join Date: May 2013 Location: dallas Posts: 17 Drives: Pearl White 11' 370z Rep Power: 11	I need to go and detail my machine today for tonights relief fund raiser car meet in dallas.

05-22-2013, 03:01 PM	#4447 (permalink)
DLSTR A True Z Fanatic Join Date: May 2011 Location: Süd Germany Posts: 2,462 Drives: 21Supra 2.0/22 M240i Rep Power: 21267	Cold day here in Germany. Spring? Summer? Not quite yet. Sort of there. Drove to get my hair buzzed and off to the gym. Found a nice gap on the Autobahn for some 3 digit fun! I just wish is would stay a touch warmer.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5D3 Discussion	FrancoPhoto	Photography	6	07-09-2012 12:08 AM
[Off Topic,GTA]Who dares to drive in the snow tonight with their Z?	Da.Menace	Canada	11	02-05-2011 05:43 PM
Double Din Dvd/Nav Feedback Topic	Carbon_z	Audio & Video	7	11-19-2010 11:10 AM
on the topic of oil ??	sonic370	Nissan 370Z General Discussions	5	07-17-2010 09:50 PM
Lounge (Off Topic) Rules	AK370Z	The Lounge (Off Topic)	0	09-23-2008 07:19 PM