What did you do with your Z today III

Pintsize725 · 06-01-2012, 08:26 PM

Quote:

Originally Posted by happytheman

Not sure about the air bit, but it doesn't necessarily surprise me.

That's a resonator, and yes..you're dine with it.

D'oh on the broken bolt!

Sure does look tasty!

What's your immediate take?

Oh, did you do it yourself?

Haven't taken it out for a spin yet. I wanted to check in and make sure the air issue was normal.

I did it with the help of a friend. He did most of the disassembling, I fitted the tubes, we both reassembled.

I should be a hand model! Lol

happytheman · 06-01-2012, 08:28 PM

Check my

sfearl1 · 06-01-2012, 08:29 PM

Make sure your airbox is seated properly. There's a rubber/foam gasket in the front there where the inlet is that feeds air to the airbox. I had to readjust mine so the gasket had a good seal going to the front of the airbox.

Pintsize725 · 06-01-2012, 08:32 PM

Quote:

Originally Posted by sfearl1

Make sure your airbox is seated properly. There's a rubber/foam gasket in the front there where the inlet is that feeds air to the airbox. I had to readjust mine so the gasket had a good seal going to the front of the airbox.

It's too dark out now. I'll have to see if he can help me again. I didn't disconnect the sensors but was able to pull up the boxes and move around a bit, could have sworn we had that side lined up though.

What happens if i don't fix it?

tibal · 06-01-2012, 08:35 PM

Just tossed on my 20mm powertrix spacers in the front to even out with 25mm in the back.

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

happytheman · 06-01-2012, 08:41 PM

Looks great Tibal.

Is that stock ride height?

sfearl1 · 06-01-2012, 08:43 PM

Quote:

Originally Posted by happytheman

Looks great Tibal.

tibal · 06-01-2012, 08:48 PM

Quote:

Originally Posted by happytheman

Looks great Tibal.

Is that stock ride height?

Quote:

Originally Posted by sfearl1

Thank you very much!

I'm dropped on H+Rs. The angle and zoom is altering the image a bit I noticed. If you look at my sig pic you can see it more clearly.

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

happytheman · 06-01-2012, 08:51 PM

Quote:

Originally Posted by Pintsize725

It's too dark out now. I'll have to see if he can help me again. I didn't disconnect the sensors but was able to pull up the boxes and move around a bit, could have sworn we had that side lined up though.

What happens if i don't fix it?

If there's a way to get more air flow, then it's worth your while to fix it. It's not going to hurt anything though until you do.

Pintsize725 · 06-01-2012, 09:01 PM

Quote:

Originally Posted by happytheman

If there's a way to get more air flow, then it's worth your while to fix it. It's not going to hurt anything though until you do.

I really am not looking forward to removing that thing again. Blah!

jinkang612 · 06-01-2012, 09:23 PM

put in my lower rear control arm with a -3 camber re painted my strut bar and engine cover bought new tires and mounted them on got 2 hotchkis sway bars and installed it, bought new cold air intakes by AEM because i got some off brand intakes and got pulled over and got a ticket for my intakes not having a carb sticker... ******* cop... bought the front camber arms now just waiting for intakes and front camber arm...

bleufiend · 06-01-2012, 09:29 PM

Wished I could of washed my Z today but alas, miami's weather did not agree with that. Will be cleaning/detailing her over the weekend.

happytheman · 06-01-2012, 09:38 PM

Quote:

Originally Posted by jinkang612

put in my lower rear control arm with a -3 camber re painted my strut bar and engine cover bought new tires and mounted them on got 2 hotchkis sway bars and installed it, bought new cold air intakes by AEM because i got some off brand intakes and got pulled over and got a ticket for my intakes not having a carb sticker... ******* cop... bought the front camber arms now just waiting for intakes and front camber arm...

I'm just sayin'!

martin82 · 06-01-2012, 09:38 PM

Am I the only one doing this? Lol

onzedge · 06-01-2012, 09:56 PM

Quote:

Originally Posted by tibal

Just tossed on my 20mm powertrix spacers in the front to even out with 25mm in the back.

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

06-01-2012, 08:28 PM	#8102 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Check my __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

06-01-2012, 08:29 PM	#8103 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 17	Make sure your airbox is seated properly. There's a rubber/foam gasket in the front there where the inlet is that feeds air to the airbox. I had to readjust mine so the gasket had a good seal going to the front of the airbox. __________________ Scott

06-01-2012, 08:41 PM	#8106 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Looks great Tibal. Is that stock ride height? __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub Last edited by happytheman; 06-01-2012 at 08:45 PM.

06-01-2012, 09:23 PM	#8111 (permalink)
jinkang612 Base Member Join Date: Apr 2012 Location: san diego Age: 35 Posts: 125 Drives: 2009 nissan 370z Rep Power: 13	new mods for today put in my lower rear control arm with a -3 camber re painted my strut bar and engine cover bought new tires and mounted them on got 2 hotchkis sway bars and installed it, bought new cold air intakes by AEM because i got some off brand intakes and got pulled over and got a ticket for my intakes not having a carb sticker... ******* cop... bought the front camber arms now just waiting for intakes and front camber arm...

06-01-2012, 09:29 PM	#8112 (permalink)
bleufiend Base Member Join Date: Jan 2011 Location: Miami, FL Posts: 200 Drives: 370z MB Spt/Tour 6sp Rep Power: 14	Wished I could of washed my Z today but alas, miami's weather did not agree with that. Will be cleaning/detailing her over the weekend. __________________ Z34 owner formerly Z33. OZOC FTW.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 07:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 12:30 AM