Help! Stillen G3 error!!

Guard Dad · 01-23-2012, 06:34 PM

This is usually a brainless install. Vacuum leaks and damaged MAFs are the usual problems. The MAFs are super delicate, I'd start there.

Ron · 01-23-2012, 06:44 PM

I say bad MAFs. Maybe they dropped one/them?

SPOHN · 01-23-2012, 06:50 PM

Everytime I take mine out I act like a surgeon. I place them in a plastic bag seal that up then wrap a towel around them for cushion and pin then back clear of all work.

Ron · 01-23-2012, 06:51 PM

I do the same lol. They are expensive!

BigT · 01-23-2012, 08:54 PM

Swap mafs.

Mt Tam I am · 01-25-2012, 05:52 PM

10 months after G3 install I had my mafs replaced, as Service engine soon light was on. I am not making a connection but it happened.

Unique_Z · 01-25-2012, 07:46 PM

Thanks for the replies everyone and sorry for the delay of response. I'll just called my mechanics to diagnose the car since i've done all of the above. So i'll update soon.

SPOHN · 01-25-2012, 07:47 PM

GL

BeemaaZ · 01-25-2012, 07:58 PM

Quote:

Originally Posted by Iwan72

....i wiped it with microfiber towel and no i did not.....

Should have used the MAF Sensor Cleaner next time...

SPOHN · 01-25-2012, 08:06 PM

Quote:

Originally Posted by BeemaaZ

Should have used the MAF Sensor Cleaner next time...

I meant to point that out also. But yea I wouldn't wipe with anything of such nature. Repped

Unique_Z · 01-27-2012, 08:27 PM

Thanks again to everyone that helped me with the solution. I told my mechanic about those solutions and he tried them all and surprisingly its just the sensors that was dirty..he blowed it off and cleaned ut with MAF cleaner and all went well. I've also installed invidia cbe and the car feels more powerful!

SPOHN · 01-27-2012, 08:35 PM

Awesome

Streetlife · 01-28-2012, 09:27 AM

Quote:

Originally Posted by Iwan72

Thanks again to everyone that helped me with the solution. I told my mechanic about those solutions and he tried them all and surprisingly its just the sensors that was dirty..he blowed it off and cleaned ut with MAF cleaner and all went well. I've also installed invidia cbe and the car feels more powerful!

Cool Iwan72, good to know it was something so minor!

Doug&Michelle · 01-28-2012, 09:48 AM

Great news man. I just did my G3 and I didn't know the sensors were so delicate. I must have gotten lucky because I just let them dangle or I placed them on the engine. I wasn't careful at all and (so far) my Z is running perfect.

onzedge · 01-28-2012, 12:33 PM

Quote:

Originally Posted by Iwan72

Thanks again to everyone that helped me with the solution. I told my mechanic about those solutions and he tried them all and surprisingly its just the sensors that was dirty..he blowed it off and cleaned ut with MAF cleaner and all went well. I've also installed invidia cbe and the car feels more powerful!

01-23-2012, 06:34 PM	#16 (permalink)
Guard Dad Enthusiast Member Join Date: Aug 2010 Location: South Orange County, CA Posts: 422 Drives: 2010 370Z Silver A7 Rep Power: 14	This is usually a brainless install. Vacuum leaks and damaged MAFs are the usual problems. The MAFs are super delicate, I'd start there. __________________ 2010 Brilliant Silver, Base w/Sport Package, AT7, Katzkin leather, upgraded audio and lots of Dynamat and a bunch of small stuff.

01-23-2012, 06:44 PM	#17 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	I say bad MAFs. Maybe they dropped one/them? __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

01-23-2012, 06:50 PM	#18 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Everytime I take mine out I act like a surgeon. I place them in a plastic bag seal that up then wrap a towel around them for cushion and pin then back clear of all work. __________________

01-23-2012, 06:51 PM	#19 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	I do the same lol. They are expensive! __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

01-25-2012, 05:52 PM	#21 (permalink)
Mt Tam I am A True Z Fanatic Join Date: Jun 2010 Location: California Posts: 10,709 Drives: 370Z T/S/N 6MT & XKE Rep Power: 3842	10 months after G3 install I had my mafs replaced, as Service engine soon light was on. I am not making a connection but it happened. __________________ "Does the carpet match the drapes? NO!!! I don't date bald women." Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

01-23-2012, 08:54 PM	#20 (permalink)
BigT Enthusiast Member Join Date: Jan 2012 Location: NJ Posts: 469 Drives: 98 2g DSM Rep Power: 13	Swap mafs.

01-25-2012, 07:46 PM	#22 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Thanks for the replies everyone and sorry for the delay of response. I'll just called my mechanics to diagnose the car since i've done all of the above. So i'll update soon. __________________ My Z Build UniqueZ

01-25-2012, 07:47 PM	#23 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	GL __________________

01-27-2012, 08:27 PM	#26 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Thanks again to everyone that helped me with the solution. I told my mechanic about those solutions and he tried them all and surprisingly its just the sensors that was dirty..he blowed it off and cleaned ut with MAF cleaner and all went well. I've also installed invidia cbe and the car feels more powerful! __________________ My Z Build UniqueZ

01-27-2012, 08:35 PM	#27 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Awesome __________________

01-28-2012, 09:48 AM	#29 (permalink)
Doug&Michelle Base Member Join Date: Jan 2011 Location: Tulsa, Oklahoma Posts: 176 Drives: '09 370z Tourng Auto Rep Power: 14	Great news man. I just did my G3 and I didn't know the sensors were so delicate. I must have gotten lucky because I just let them dangle or I placed them on the engine. I wasn't careful at all and (so far) my Z is running perfect. __________________ Clear bra, Fast Intentions TDX SS 18" Res, Painted wheels, Stillen GenIII CAI, and window tint. Member of OKZCC.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan consult3 diagnostic error? You Pay?	fritz	Engine & Drivetrain	13	10-21-2014 12:35 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Database error??	dixon cider	The370Z.com Feedback, Suggestions & Questions	31	11-24-2010 01:35 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 12:53 PM