Same to you, Mr. Kenchan. :tup:

Just got home after picking up a ton of wood pellets. No not with the Z with the Titan. For those not familiar with wood pellets they are burned in a pellet stove to produce heat for your house. They significantly reduce your heating bill.:tiphat:

Hmmm. A pellet stove. Those are like unicorns to us in the south.

:icon18: Same here.

wow, i dont see how a $2000 stove will help me reduce utility bill...

Napoleon NPS40 Gas Stoves

That is why I posted an explanation for the snow impaired.LOL :ugh2:

so where does the smoke go to if not hooked up to a chimney?

ive never seen anyone use this in our snowbelt state...

Ken I heat with oil and recieved 2 $1000 bills within 3 weeks last year. So it doesn't take long and you are saving money. I have a fireplace insert stove and the pipe goes up the chimney. They can be vented out the side of the house but the smoke can be forced back into the stove in high winds.

oh wow...

no natural gas in your area? :confused:

Nope no natural gas. :shakes head:

that sucks... but hey, you got your solution for the winter. :tup:

I went to the beach again and forced a session.

OMG the water was cold :icon17:

haha, good thing we're not talking about knobs today. :tup:

TGIT! :D

wasn't planning to track often, but my friends told me about a good deal for new year's eve...

I just got back from lunch at the Granite Rock Grill in Rocklin, CA and had to stop and admire for a minute.

Waizz don't know that I can feel bad for ya. Just wear a body suit and you'll be fine. If you went in the water here you would be a popcicle in 2 minutes.:nutswinger: Bruce what is the new years deal?:excited: Ken Ken Ken what are we going to do with you? :icon18: Onze nice pic.

I have a question guys. What happened to the person that started this thread SkyZ from Canada? Maybe they will ask this question in the camaro thread sometime. Haven't had a post to the what did you do with your camaro thread since yesterday when I posted how poorly the camaro compared to our z's.

Fapoleon?

:icon17:

I have a really good wetsuit but my head and hands still get really cold. This time of year you just have to suck it up :tup:

Thats still got my vote for your new vanity plate.

What about a plate "FOBGINA" LOL Or maybe not.:wtf2:

that is an interesting pict, mr.onzedge! :tup:

Thanks -- it's a crappy Droid pic, but I think it is interesting.

There's a coupon code for an Extreme Speed track event that day at Streets of Willow. $95 and I think that might include free timing also for the first 40 people. I just went tot he track recently and also will be driving back from Vegas that Friday so I'm not sure if I'll be going or not.

Sounds like a kewl event. As a vert owner I'm not as welcome at events like that. At Watkins Glen one of the 2 driving schools allow the verts as is and one doesn't. I've just posted today in the track area asking if anybody knows of a rollbar avail. for verts that would allow us to enjoy the track days also.

Got my Christmas presents to Z delivered today.

1) Simota Fuel Gauge Overlay
2) Egg Yoke Eliminator Steath Tail light Bulbs
3) LED Map Light Bulbs
4) Evo-R Smoked Fog Light Kit
5) Evo-R FRP Rear Diffuser
6) Evo-R FRP Side Blades

Only problem is I fly out first thing tomorrow morning and won't be back until after the new year. Debating on installing the body parts myself or having a body shop do them.

I will probably lay the fuel gauge overlay tonight just to get my fix before leaving.

Srenity I am not a body person and my father is one of the least mechanically inclined person I know. I installed the side blades and rear diffuser with his "help". If you have a helping hand you should be able to do it in one day. I have not tackled the tail lights or fog light so I cannot help ya there.:ugh2: The overlay took me two tries as the first time I had not seen the DIY and tried to install it dry.

Thanks for the advice

You will need another person and to jack the car up and place it on jackstands. Lift it high enough to be able to drill pilot holes from under the side blades. Also you need to have somebody hold the side blades up while you eye from above to make sure they are even wth the door when looking from above. Make sure you use your hands to check that the blades are correct front to back. Do not try to view if they are correct with the wheel wells as they can look off but are correct to the wheel well. Hard to explain but it is very hard to align by site front to back. Drill pilot holes and peel tape as you go. Easiest if you put a screw at the front then back and work towards the middle. Good luck as I said I was able to do it so anybody should LOL:ugh2:

Installed my Stillen Gen 3 intakes today & I am one happy camper :tup:
Merry Christmas everybody!

http://i1092.photobucket.com/albums/...n/6b97c7b5.jpg

http://i1092.photobucket.com/albums/...n/e21f93df.jpg

I've been too'ing and froo'ing about a audio upgrade and decided to finally take the plunge!

Getting some Focal KRX2 + Solid 2 installed in the morning, pretty excited :)

Cool shot.

:iagree:Happy holidays everyone! :D

Very nice shot. :tup:

Skeeter, that's (given a high resolution shot) the stuff that widescreen monitor wallpaper is made of right there!

Thanks for the props everybody, but i have to give credit to our clubs resident camera guy for the idea. Hopefully I can get a copy of his pics later. If I do I'll post his up as well, I know for a fact he has some very badass pics. As for wallpaper use the full size of the pic is 4256x2832 after I cropped out some of the top and bottom of the picture.

that's multi-monitor wallpaper ;)

Plasti- Dip door handles. Check it out.

http://www.the370z.com/members-370z-...ml#post1461062

Nice Spohn. Looks pretty clean. :tup: