Paintless Dent Removal Price

PetersPotter · 01-06-2022, 03:35 AM

Hi,

I recently got a quote to remove a small dent the size of a coin on the passenger side door of my Z. There was no paint damage so the dent just needed to pop back out. The guy quoted me 2K AUD. Does that sound normal? My initial thoughts are that it's way too high for such a small dent.

BC416 · 01-06-2022, 06:23 AM

No - I had PDR done on an area on my rear fender which is a pretty difficult spot to fix. Cost me $450. Keep shopping.

God-Speed · 01-06-2022, 06:29 AM

Quote:

Originally Posted by PetersPotter

Hi,

I recently got a quote to remove a small dent the size of a coin on the passenger side door of my Z. There was no paint damage so the dent just needed to pop back out. The guy quoted me 2K AUD. Does that sound normal? My initial thoughts are that it's way too high for such a small dent.

Not No but Hell No!! Walk!!

Fuzzzy · 01-06-2022, 09:23 AM

Quote:

Originally Posted by BC416

No - I had PDR done on an area on my rear fender which is a pretty difficult spot to fix. Cost me $450. Keep shopping.

+1

I had a fairly large area on my front fender done for about $450 as well a few years back.

JARblue · 01-06-2022, 09:55 AM

Holy hell! Tell that dude to go eat rocks.

I had one bigger than a quarter corrected for $175

viiv · 01-06-2022, 11:33 AM

I've been to Australia. Everything is through the roof expensive. Maybe that is a normal price there.

Rusty · 01-06-2022, 02:49 PM

You can do it yourself with a paintless dent puller kit. I got one from Harbor Freight for around $20.00. Used it to pull dents out of motorcycle gas tanks.

https://www.google.com/search?q=pain...ih=577&dpr=2.5

Magic Bus · 01-06-2022, 04:45 PM

Quote:

Originally Posted by Rusty

You can do it yourself with a paintless dent puller kit. I got one from Harbor Freight for around $20.00. Used it to pull dents out of motorcycle gas tanks.

https://www.google.com/search?q=pain...ih=577&dpr=2.5

Bought one of these puller kits, not the rods. Did a number of small dings on the wife's GTI and my M2. Works pretty good. Some of them, you don't notice a thing. On 2 of them, the dent is totally gone, as you can't see it or feel it. However, due to the paint being pushed in on the dent, you can notice a small difference, like a tiny swirl or wave in the finish of the paint after it was pulled. Much better than looking at the ding though. Just be aware, I've read that it's possible to remove some paint with this method.

Regarding OP's question about price, I had a mobile guy that would charge me $150 1st dent, $100 for 2nd and on, if it's on the same visit. So to me, your quoted price sounds excessive.

PetersPotter · 01-07-2022, 11:27 PM

Thanks for the responses. Thought it sounded way too high. Will keep shopping for a decent price.

01-06-2022, 03:35 AM	#1 (permalink)
PetersPotter Base Member Join Date: Sep 2020 Location: Australia Posts: 10 Drives: 19 Nissan370z Nissmo Rep Power: 4	Paintless Dent Removal Price Hi, I recently got a quote to remove a small dent the size of a coin on the passenger side door of my Z. There was no paint damage so the dent just needed to pop back out. The guy quoted me 2K AUD. Does that sound normal? My initial thoughts are that it's way too high for such a small dent. God-Speed likes this.

01-06-2022, 06:23 AM	#2 (permalink)
BC416 Track Member Join Date: Jun 2014 Location: NJ Age: 37 Posts: 718 Drives: 2012 KAD 6MT Rep Power: 591	No - I had PDR done on an area on my rear fender which is a pretty difficult spot to fix. Cost me $450. Keep shopping. PetersPotter likes this. __________________ F.I. / K&N / 180 / Forgestar

01-06-2022, 09:55 AM	#5 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Holy hell! Tell that dude to go eat rocks. I had one bigger than a quarter corrected for $175 PetersPotter likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

01-06-2022, 11:33 AM	#6 (permalink)
viiv Enthusiast Member Join Date: Jun 2019 Location: Montreal Posts: 293 Drives: 20 Nissan 370Z PR M6 Rep Power: 34015	I've been to Australia. Everything is through the roof expensive. Maybe that is a normal price there. PetersPotter likes this.

01-06-2022, 02:49 PM	#7 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,873 Drives: 2011 Nismo GM 6M Rep Power: 2684436	You can do it yourself with a paintless dent puller kit. I got one from Harbor Freight for around $20.00. Used it to pull dents out of motorcycle gas tanks. https://www.google.com/search?q=pain...ih=577&dpr=2.5 JARblue, sx moneypit, Zingston and 1 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-07-2022, 11:27 PM	#9 (permalink)
PetersPotter Base Member Join Date: Sep 2020 Location: Australia Posts: 10 Drives: 19 Nissan370z Nissmo Rep Power: 4	Thanks for the responses. Thought it sounded way too high. Will keep shopping for a decent price.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Paintless Dent/Ding Removal in San Gabriel Valley	nis350	Southern California Region	1	07-07-2017 09:15 PM
Paintless dent removal?	JustinP	Exterior & Interior	5	04-08-2017 01:06 PM
Looking for Paintless Dent Removal - SoCal	SgtGoldy	Southern California Region	9	01-06-2017 02:51 PM
I'm looking for a reputable Paintless Dent Removal Shop on LI	Cmike2780	North East Region	5	08-03-2012 10:58 AM
paintless dent removal so cal	rdt7	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	0	02-16-2012 06:08 PM