What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Hotrodz · 06-21-2017, 08:52 AM

Which dash cam did you get?

Ghostvette · 06-21-2017, 09:24 AM

Quote:

Originally Posted by Hotrodz

Which dash cam did you get?

The Spy-Tec G1W-C

This one may be a 'temporary' one, at least until I decide on whether I run a dual channel with GPS so I have speed and rear coverage. It would be nice if I could access the vehicle black box so I can have the state of the lights and turn signals integrated into the recording, but that's a whole other level of 'holy crap... do I really need this?...'

ChopsZ · 06-21-2017, 09:46 AM

Quote:

Originally Posted by ChaseZ

Check the v-bands too. I had to tighten just about all my Motordyne v-bands this summer, after less than a year. One even needed a bit of RTV. Bunch of little leaks that could only find in a smoke test.

No V-bands in my setup. Just the stock manifolds to the ART pipes to the HKS High-Power exhaust. All gaskets present and all bolts/nuts tight.

I just admitted to having tight nuts. LOL

NRGz · 06-22-2017, 06:57 PM

After a week of PB blast on the demon bolts I ended up breaking one. Luckily it broke a little pass where they meet. FI RHFC went on. Soundssssssssss amazzzinggggggggggg by the way. I think i have a leak when i unbolted the y pipe though.
It feels like it runs a little rough though from going from a stop on the low end.
A new tune we go after i find the leak!

Sent from my SM-G950U using Tapatalk

ChaseZ · 06-22-2017, 07:44 PM

Quote:

Originally Posted by ChopsZ

I just admitted to having tight nuts. LOL

Head down the coast a ways, you'll take care of that no problem

ChopsZ · 06-22-2017, 09:49 PM

Quote:

Originally Posted by ChaseZ

Head down the coast a ways, you'll take care of that no problem

LOL!!!

ChaseZ · 06-22-2017, 10:11 PM

There ya go. That'll make EVERYTHING better lol

redondoaveb · 06-23-2017, 03:57 PM

Just ordered 4.08 ring and pinion gears and high capacity differential cover from Z1 Motorsports. I'll be having Whiteline differential bushings installed too.

NVSTR · 06-23-2017, 07:14 PM

Z1 Test Pipes ordered as well

Sway · 06-23-2017, 08:05 PM

Where'd you get the CF piece from?

DeliriousClam · 06-23-2017, 08:21 PM

Quote:

Originally Posted by Sway

Where'd you get the CF piece from?

not sure about him but I got mine from rhdjapan.com

JTM88 · 06-23-2017, 09:07 PM

Quote:

Originally Posted by NVSTR

Z1 Test Pipes ordered as well

I'm not a huge CF fan, but that's ******* legit

JTM88 · 06-23-2017, 09:46 PM

I finally got the harness to install my old screen into the Z. The one that was installed when I got it crapped out last Saturday. A week with out tunes was brutal.

ChopsZ · 06-24-2017, 08:08 PM

Got my Z a little lower today.

From this...

To this...

P's_Z · 06-25-2017, 08:34 AM

Broke in new brake pads and rotors today after replacement yesterday, which included:

Pad/rotor replacement(stoptech/duralast golds)
Brake fluid flush(motul 5.1)
A disc fall on my foot
Bang my head about 20 times on wheel wells
Busted knuckles
Cussing every word in existence
Throw 1 of the 4 seized rotors a distance 10 feet after removing

Changing brakes/rotors is not hard, but i found it very time consuming, especially since i have spacers, i had to find a way to remove the seized rotors/spacer using some nuts/bolts/washers and pushing them out from behind the rotors

Im ashamed to say it, but i think next time ill just take it to a shop

/vent over

06-21-2017, 08:52 AM	#76 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Which dash cam did you get? __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

06-22-2017, 06:57 PM	#79 (permalink)
NRGz Enthusiast Member Join Date: Jun 2016 Location: NorCal Posts: 259 Drives: 09 Z. 06 Zx636 Rep Power: 28	After a week of PB blast on the demon bolts I ended up breaking one. Luckily it broke a little pass where they meet. FI RHFC went on. Soundssssssssss amazzzinggggggggggg by the way. I think i have a leak when i unbolted the y pipe though. It feels like it runs a little rough though from going from a stop on the low end. A new tune we go after i find the leak! Sent from my SM-G950U using Tapatalk Last edited by NRGz; 06-22-2017 at 07:12 PM.

06-22-2017, 10:11 PM	#82 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94682	There ya go. That'll make EVERYTHING better lol Kzonts and ChopsZ like this.

06-23-2017, 07:14 PM	#84 (permalink)
NVSTR Base Member Join Date: Jul 2016 Location: Houston Posts: 49 Drives: 2014 370z Nismo Rep Power: 8	Z1 Test Pipes ordered as well JTM88 likes this.

06-23-2017, 08:05 PM	#85 (permalink)
Sway Track Member Join Date: Sep 2012 Location: TX Posts: 697 Drives: 2018 GTR Rep Power: 37870	Where'd you get the CF piece from? __________________ - White 2018 GTR FBO+E85 - Check out my old build thread: Sway’s Journal-Hitomi ~Live and let live!~

06-23-2017, 03:57 PM	#83 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,296 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Just ordered 4.08 ring and pinion gears and high capacity differential cover from Z1 Motorsports. I'll be having Whiteline differential bushings installed too.

06-23-2017, 09:46 PM	#88 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 13	I finally got the harness to install my old screen into the Z. The one that was installed when I got it crapped out last Saturday. A week with out tunes was brutal. __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal-

06-24-2017, 08:08 PM	#89 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 48 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2300	Got my Z a little lower today. From this... To this... P's_Z and JTM88 like this. __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity

06-25-2017, 08:34 AM	#90 (permalink)
P's_Z A True Z Fanatic Join Date: Apr 2013 Location: PR Posts: 1,530 Drives: Zeta Rep Power: 468	Broke in new brake pads and rotors today after replacement yesterday, which included: Pad/rotor replacement(stoptech/duralast golds) Brake fluid flush(motul 5.1) A disc fall on my foot Bang my head about 20 times on wheel wells Busted knuckles Cussing every word in existence Throw 1 of the 4 seized rotors a distance 10 feet after removing Changing brakes/rotors is not hard, but i found it very time consuming, especially since i have spacers, i had to find a way to remove the seized rotors/spacer using some nuts/bolts/washers and pushing them out from behind the rotors Im ashamed to say it, but i think next time ill just take it to a shop /vent over axmea? and ChopsZ like this. __________________ Zeta

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM