sandersd

Will that harnness work for 370z even though made for 350z? Also, will it work for both driver and passanger side? Thanks so much for your help.

Hey nice stable of cars! Just wondering what you think of the Nismo 370 compared to your 2002 996.. Which do you like more? Pros and Cons of each? I must say that I was looking at some used 996s before I bought my 370Z a couple years ago, never did I test drive one though.

First I determined where I would drill the holes. I knew I wanted the pins located in the flat area where the bumpers landed and I wanted to accurately place them symmetrically. Measuring was iffy...

After the hood was painted I attached the seal with the provided pins. BTW I purchased an OEM replacement for the seal and the washers. I left the originals attached to the factory hood in case I...

Complete Seibon hood and Aerocatch hood pin install: http://www.the370z.com/exterior-interior/104911-seibon-cf-hood-aerocatch-latch-install.html If you have any questions don't hesitate to ask....

There is an adjustment bolt on each of the lower links - one on the front lower link and one on the rear lower link. Download the service manual for a detailed description and alignment procedures. ...

Something I may try if a 2011 filler neck can't be made to work: I sourced a PVC pipe fitting with a threaded opening to screw the 90 degree fitting into. The neck fits well into the opening and with...

http://www.the370z.com/brakes-suspension/100217-bc-er-spl-install-adjust.html

I agree. I kept my Swifts for about a month before I replaced them with coilovers. They just felt too squishy.

I don't like them either and they're a pain to clean. How about these: ...

I have two dehumidifiers that keep mine to around 40%. Have to dump every day in the summer, once or twice a week in the winter.

Seibon BD (http://seiboncarbon.com/store/products/bd-style-carbon-fiber-hood-for-2009-2012-nissan-370z.html#!prettyPhoto) They sent me to their authorized dealer THMotorsports...

Slotted the second hole, bent and mounted the pin: 104667 104668 Here's the lip on the latch that has to be removed: 104669

First I determined where I would drill the holes. I knew I wanted the pins located in the flat area where the bumpers landed and I wanted to accurately place them symmetrically. Measuring was iffy...

Saw this and knew it was exactly what I was looking for: 104568 Called Jtran for a quote but they said Seibon didn't make that hood anymore. Needless to say I was crushed. So I searched the...

First I determined where I would drill the holes. I knew I wanted the pins located in the flat area where the bumpers landed and I wanted to accurately place them symmetrically. Measuring was iffy...

First I determined where I would drill the holes. I knew I wanted the pins located in the flat area where the bumpers landed and I wanted to accurately place them symmetrically. Measuring was iffy...