Nissan 370Z Forum - View Profile: KapitalZ

KapitalZ liked post by phunk On thread : Hi rpm oil starvation

Liked On: 12-14-2020, 11:46 PM
Posted On: 05-26-2015, 01:05 AM

KapitalZ liked post by phunk On thread : Hi rpm oil starvation

Finally had a chance to machine most of a pan this weekend. I have to pick up a couple cutters Tuesday to make some finishes passes then I can remove it from the CNC and show it off. I also have to...

Liked On: 12-14-2020, 11:45 PM
Posted On: 05-24-2015, 11:52 PM

KapitalZ liked post by phunk On thread : Hi rpm oil starvation

Excellent find! Just a quick glance on my iPad it looks like it might be perfect. Extruded aluminum hinge. Genius! Sometimes little pieces like that can be tedious to machine and set-back product...

Liked On: 12-14-2020, 11:45 PM
Posted On: 02-13-2015, 10:25 PM

KapitalZ liked post by BGTV8 On thread : Hi rpm oil starvation

This is why the Grand Am race teams went dry sump - the NISMO oil pumps gears are just a better steel - they just tolerate the harmonics for longer, but are still subject to failure under sustained...

Liked On: 12-14-2020, 11:43 PM
Posted On: 02-10-2015, 07:49 PM

KapitalZ liked post by phunk On thread : Hi rpm oil starvation

LOL I dont really need the pan in my hand, I can just as easily get the bolt pattern and flange off my Z. Its only a nights work of CAD. But I am curious about the hinge system for the baffles. IMHO...

Liked On: 12-14-2020, 11:41 PM
Posted On: 02-09-2015, 04:49 PM

KapitalZ liked post by phunk On thread : Hi rpm oil starvation

Lets point out that your pan is not simply baffled, but that it has active baffles! Big, huge, epic difference. A static baffle will block fluid transfer just as well as it retains it, and in a...

Liked On: 12-14-2020, 11:40 PM
Posted On: 02-08-2015, 04:35 PM

KapitalZ liked post by Shamu On thread : oil starvation problem?

I would like to challenge any of you who have done over 10 track events to tear down your motors and show us your rod bearings. Talking to those who build VQ race motors it's known that the lack of ...

Liked On: 12-14-2020, 11:34 PM
Posted On: 03-05-2014, 09:56 PM

KapitalZ liked post by BGTV8 On thread : oil starvation problem?

A sump spacer and/or extended sump with baffles will provide an additional litre or so, which will be a reasonable safety margin for most track-day aficionado's using R-Spec tyres (RS-3, AD08, R888...

Liked On: 12-14-2020, 11:29 PM
Posted On: 03-04-2014, 04:59 PM

KapitalZ liked post by gbhrps On thread : power seat adjustment control switch

paigeone, Several ideas: With a separate 12 volt power source check the seat motor to make sure its working, as the switch may not be the issue. Then check that you have power to the seat...

Liked On: 12-14-2020, 05:45 AM
Posted On: 12-30-2019, 07:07 PM

KapitalZ liked post by Chuy On thread : CJM Oil Pan

It sits right above the cross member so...Since the under tray attaches to the cross member, I bet it would

Liked On: 12-14-2020, 04:32 AM
Posted On: 05-26-2015, 09:42 PM

KapitalZ liked post by phunk On thread : CJM Oil Pan

This oil pan sits higher than the crossmember, so unless an undertray intentionally raises up higher than the crossmember, they will fit together.

Liked On: 12-14-2020, 04:32 AM
Posted On: 05-26-2015, 09:40 PM

KapitalZ liked post by Elmo370z On thread : CJM Oil Pan

Will work with z1's undertray?

Liked On: 12-14-2020, 04:32 AM
Posted On: 05-26-2015, 09:34 PM

KapitalZ liked post by 2011 Nismo#91 On thread : Track Oil Temp Issues, looking for options.

Trackspec Hood vents worked great! It took much longer to get to peak temp (240F Oil, 208F Coolant) Air temp was around 58-68F all day so that helped a lot too. Still going to duct and relocate all...

Liked On: 12-12-2020, 03:29 AM
Posted On: 10-19-2019, 02:52 PM

KapitalZ liked post by andy_meng1024 On thread : Track Oil Temp Issues, looking for options.

I have 2* 34row coolers in parallel, CSF triple pass radiator, SPAL fans, Zele front bumper, Varis kamikaze hood, Varis fender, front fender liner delete, and Mishimoto 68C/154.5F thermostat for oil...

Liked On: 12-12-2020, 03:26 AM
Posted On: 05-06-2019, 11:27 PM

KapitalZ liked post by Hotrodz On thread : Track Oil Temp Issues, looking for options.

The tracks I run in AZ and CA during the spring and summer will see temps over a 100*. Being boosted only add heat so I have taken some extreme measures. I have a Greddy extended oil pan, upgraded...

Liked On: 12-12-2020, 03:22 AM
Posted On: 05-06-2019, 12:35 PM

KapitalZ

Base Member

Statistics

Likes Given

Mini Statistics