Hi rpm oil starvation

phunk

Finally had a chance to machine most of a pan this weekend. I have to pick up a couple cutters Tuesday to make some finishes passes then I can remove it from the CNC and show it off. I also have to get a piece laser cut for it this week.

I will probably start a thread about it around next weekend and see how many people would want one.

Attached Images

	11265087_10153305931089890_4983436991215013125_n.jpg (113.2 KB, 42 views)
	11265569_10153304921044890_2187765393327212641_n.jpg (109.8 KB, 47 views)

__________________

jrb55gh

Your pan looks great!

Your oil pan project had caused me to pay attention to the motions of my car and try to visualize what happens to the oil in the pan when on real world driving surfaces. One condition has kept me afraid of holding rpm in the 4500 – 7500 rpm range while cornering aggressively. That is an undulating surface. In the extreme violent pitching of the car would require a dry sump system. From the pictures of your pan I see how the extra depth and flaps control lateral oil movement and keep the pick up submerged. That works on smooth surfaces. My concern is how much vertical - g will this design tolerate and still prevent oil starvation. Could some sort of a grate be positioned over the top of the pan to keep oil from splashing up away from the pickup when the car is pitching in a turn?