Nissan 370Z Forum - View Profile: KapitalZ

KapitalZ liked post by gbrettin On thread : Gas

Ethanol is fine for the Z's engine. Straight E is less energy dense than gasoline so it requires a tune, aka injectors to be scaled roughly 30% more. The thing to watch out for E is having rubber...

Liked On: 04-20-2024, 07:45 PM
Posted On: 04-19-2024, 10:48 AM

KapitalZ liked post by xxAGAVExx On thread : xxAGAVExx Journal

Installed canards and a front splitter, looks cool, but I’m afraid the splitter is a little too flimsy to be functional. I’m going to add 2 cables tying it to my crash bar, if that doesn’t help I’m...

Liked On: 03-05-2024, 08:19 PM
Posted On: 02-20-2024, 12:20 PM

KapitalZ liked post by phunk On thread : phunk's CJM Greddy TT - Build, Info, Reviews, Etc

-------Photo Log Post-------- The Car: (pics coming soon, no good ones at the moment) Taking the plunge for the first time...

Liked On: 03-05-2024, 07:59 PM
Posted On: 08-12-2011, 01:34 PM

KapitalZ liked post by ZoomZ On thread : Bell Raceworks Diff Brace Install

For people who need/want to know. Just installed the Z1 Diff brace on my 2017 Nismo, using Fast Intentions exhaust. As previous picture, I have about 3/16" clearance from Passenger pipe. Plenty of...

Liked On: 01-08-2024, 05:42 PM
Posted On: 01-06-2024, 11:42 AM

KapitalZ liked post by ZoomZ On thread : Bell Raceworks Diff Brace Install

I did say "susceptible to wear" ;) Of course this depends on the user, the torque of attach nut, etc. I can see the stud breaking off, since we essentialy pass the load to the stud with a stiffer...

Liked On: 01-08-2024, 05:42 PM
Posted On: 01-06-2024, 11:37 AM

KapitalZ liked post by Rusty On thread : Bell Raceworks Diff Brace Install

Not bad. You have 2 bolts into the diff cover, and 2 other anchor points on the frame. My only concern is the length of the 2 bolts on the diff cover. Leverage on the bolts.

Liked On: 01-08-2024, 05:42 PM
Posted On: 01-05-2024, 10:43 PM

KapitalZ liked post by theART On thread : Bell Raceworks Diff Brace Install

Out of all FDF unit seem to have best design, Rusty what's your engineering mind thinks? https://uploads.tapatalk-cdn.com/20210511/ab5e71bcc05d41ec99eb3a009bbb1725.jpg

Liked On: 01-08-2024, 05:42 PM
Posted On: 01-05-2024, 09:42 PM

KapitalZ liked post by Rusty On thread : Bell Raceworks Diff Brace Install

You're wrong on some of your info. The solid bushing does not wear. I've been running the SPL solid bushings for years now. There is no wear. I also been running the Bell brace for years too. What...

Liked On: 01-08-2024, 05:41 PM
Posted On: 01-05-2024, 06:09 PM

KapitalZ liked post by theART On thread : Bell Raceworks Diff Brace Install

Found it! thanks for the tip. My diff mount puked on first launch on 305s Michelin SS, so I replaced all diff mounts with Z1 kit, this might be a good add on as well. ...

Liked On: 01-08-2024, 05:41 PM
Posted On: 01-05-2024, 01:03 PM

KapitalZ liked post by gbrettin On thread : Bell Raceworks Diff Brace Install

I did... It's fcuking expensive though. Prepare for gear whine and parasitic loss. But... you can change to any gear ratio you want and not break your diff under power. ...

Liked On: 01-08-2024, 05:40 PM
Posted On: 01-05-2024, 10:05 AM

KapitalZ liked post by Averying On thread : Keeping temps down on track?

Didn’t realize the breather tank made such a big difference to water temps! Looks like a fairly simple and cheap upgrade for the future. Sent from my iPhone using Tapatalk

Liked On: 01-06-2024, 10:30 PM
Posted On: 07-26-2023, 08:51 PM

KapitalZ liked post by weebs25 On thread : Keeping temps down on track?

I did this setup last summer on my 09. I only ran 2 events with it but I can say I noticed a difference. I was having troubles with getting bubbles in my system then overflowing and sitting in the...

Liked On: 01-06-2024, 10:28 PM
Posted On: 12-26-2023, 10:41 AM

KapitalZ liked post by danegrey On thread : danegrey's 370Z Journal

Last fast lap in the Z at my session in October... It felt good, be it without all the cooling problems I thought I might get close to my best time last year POTTi7_D4a0

Liked On: 11-23-2023, 11:12 PM
Posted On: 11-23-2023, 11:04 AM

KapitalZ liked post by Spooler On thread : The Definitive Differential Thread

I want to add one thing. If you order an OS Giken diff you can have it tuned to your liking before it is shipped to you. It is only $150.00 extra to have it done.

Liked On: 11-22-2023, 03:19 PM
Posted On: 11-17-2023, 04:28 PM

KapitalZ liked post by FL 4Motion On thread : Back in a Z once again.

…..

Liked On: 11-13-2023, 08:17 PM
Posted On: 11-12-2023, 06:24 AM

KapitalZ

Premium Member

Statistics

Likes Given

Mini Statistics