JhillTrack Member |
Last Activity: 04-26-2024 12:31 PM
- User Lists
Visitor Messages
Showing Visitor Messages 1 to 4 of 4
-
you can text me at 832 584 7953 for faster response tell me your from 370z forum and i will reply
-
11-15-2017 04:35 PM - permalinklittlejuanitoMr. JHill,
My apologies for not replying sooner. I barely saw this message since you didn't send it to my regular inbox.
Anyhow, thanks so much for your settings, I'm gonna go ahead and give the "Street" version a try and see how I like it. I'll report right after.
As of now, I'm pretty much at stock height, albeit I'm on 18's with smaller diameter tires.
My Rebound settings are 8 front and Rear.
2.0 Front camber 1.8 Rear
0 toe front and a tad in rear.
Sway Bars: Full stiff front and Middle setting on rear. (Stillen).
Car feels very neutral and was able to dialed out a lot of the understeer -
Sure thing. When you start the car, it defaults to VDC-on, just like stock. To enable RaceRom:
1. Turn VDC off
2. Adjust the wheel-slip amount using the cruise control accel/decel. When you press up or down, you'll see the current value displayed on the oil temp gauge. It ranges from 0 to 100% (i.e. off to no-wheel slip) depending on what you set it at. I usually start around 50% and adjust from there. You can change it anytime the car is on.
Friends
Showing Friends 1 to 1 of 1
-
- Rusty
- Ronin Samurai - Assassin
Likes Received
355 Likes
-
NISMO IX liked post by Jhill On thread : What exactly does traction control do?When your wheels are slipping is it giving a traction notification (blinking yellow light)? If so I'm thinking your system is fine and is pulling power, could probably see it on a scan tool...Liked On: 09-02-2016, 08:31 PM
Posted On: 09-02-2016, 06:17 PMblueranger liked post by Jhill On thread : Ecutek with Seb @ specialty z doneSo got my tune all done and dialed in with Seb. Will post dynos once in back in town. Everything went well and very easy to work with. Extremely happy with results. I went with map 1 a good all...Liked On: 08-29-2016, 05:35 PM
Posted On: 08-26-2016, 09:17 PMHotrodz liked post by Jhill On thread : Ecutek with Seb @ specialty z doneSo got my tune all done and dialed in with Seb. Will post dynos once in back in town. Everything went well and very easy to work with. Extremely happy with results. I went with map 1 a good all...Liked On: 08-26-2016, 09:41 PM
Posted On: 08-26-2016, 09:17 PMRid3_FaM0uS liked post by Jhill On thread : 370z Dumping Fuel into Cylinder 2,4,6.. WHY??!?I doubt that's gonna help as most every single person in here has exhaust and intake with no issues. Looks like your going down the guessing route rather than true diag. This almost 100% garanteed...Liked On: 08-26-2016, 01:15 PM
Posted On: 08-11-2016, 01:09 PMwideglideleon liked post by Jhill On thread : Going FI need trans cooler infoI use the Stillen kit. Have not monitored temps but had no issues at the track with it.Liked On: 08-20-2016, 12:19 PM
Posted On: 08-19-2016, 11:50 AMDavidZ370 liked post by Jhill On thread : MotorAm I the only one that thought bringing your car to a shop called Next Level "Audio" for performance tuning was going to be a bad result from the start? Sounds like some speaker boy (who are famous...Liked On: 08-16-2016, 11:57 PM
Posted On: 08-16-2016, 08:06 PMelhombre liked post by Jhill On thread : 370z Dumping Fuel into Cylinder 2,4,6.. WHY??!?I doubt that's gonna help as most every single person in here has exhaust and intake with no issues. Looks like your going down the guessing route rather than true diag. This almost 100% garanteed...Liked On: 08-11-2016, 02:29 PM
Posted On: 08-11-2016, 01:09 PMJagerMan liked post by Jhill On thread : Few questions/issues with my 370zNoises are very subjective which is why I state it may be just normal. Some people think a small tiny noise from somewhere in the chassis as the engine just blew and chase themselves around checking...Liked On: 08-09-2016, 10:23 AM
Posted On: 07-19-2016, 10:01 PMJagerMan liked post by Jhill On thread : Few questions/issues with my 370zI'll try to help as I have the exact car. Question one I am going to say is normal excepte maybe the ticking noise, you may have a sticking lifter but without actually hearing it I can't say. ...Liked On: 08-09-2016, 10:23 AM
Posted On: 07-19-2016, 06:18 PMped liked post by Jhill On thread : New Z ownerI went Stillen exhaust and really enjoy it but I had driven an abnoxiously loud car as a dd for years before and was tired of it. My z is my dd and I would not say the Stillen is like stock, sure...Liked On: 08-03-2016, 03:47 PM
Posted On: 08-03-2016, 12:39 PMLemkey99 liked post by Jhill On thread : New Z ownerI went Stillen exhaust and really enjoy it but I had driven an abnoxiously loud car as a dd for years before and was tired of it. My z is my dd and I would not say the Stillen is like stock, sure...Liked On: 08-03-2016, 03:44 PM
Posted On: 08-03-2016, 12:39 PMbreitwbo liked post by Jhill On thread : How is the reliability/cost of maintenance of 370z's? Thinking of selling my e46 m3I was a tech and started in the German field then went to Asian and last before leaving the field last year was USA. Never was a BMW or Nissan tech but in general the stereotype of Japanese cars is...Liked On: 08-01-2016, 11:29 PM
Posted On: 08-01-2016, 02:35 PMTriNismo liked post by Jhill On thread : How is the reliability/cost of maintenance of 370z's? Thinking of selling my e46 m3I was a tech and started in the German field then went to Asian and last before leaving the field last year was USA. Never was a BMW or Nissan tech but in general the stereotype of Japanese cars is...Liked On: 08-01-2016, 06:09 PM
Posted On: 08-01-2016, 02:35 PMramoszx12r liked post by Jhill On thread : How is the reliability/cost of maintenance of 370z's? Thinking of selling my e46 m3I was a tech and started in the German field then went to Asian and last before leaving the field last year was USA. Never was a BMW or Nissan tech but in general the stereotype of Japanese cars is...Liked On: 08-01-2016, 03:23 PM
Posted On: 08-01-2016, 02:35 PMdkinghl liked post by Jhill On thread : Is this authentic ICHIBA version 1 10mm spacerNot sure if it is or isn't but I thought for anything over 5mm you want an integrated hub centric ring. I don't see that on there so maybe not a good idea?Liked On: 07-25-2016, 11:05 PM
Posted On: 07-25-2016, 06:11 PM
All times are GMT -5. The time now is 09:46 AM.