Jhill

you can text me at 832 584 7953 for faster response tell me your from 370z forum and i will reply

Did you sell this? or the pumps?

Mr. JHill,

My apologies for not replying sooner. I barely saw this message since you didn't send it to my regular inbox.

Anyhow, thanks so much for your settings, I'm gonna go ahead and give the "Street" version a try and see how I like it. I'll report right after.

As of now, I'm pretty much at stock height, albeit I'm on 18's with smaller diameter tires.
My Rebound settings are 8 front and Rear.
2.0 Front camber 1.8 Rear
0 toe front and a tad in rear.
Sway Bars: Full stiff front and Middle setting on rear. (Stillen).
Car feels very neutral and was able to dialed out a lot of the understeer

Sure thing. When you start the car, it defaults to VDC-on, just like stock. To enable RaceRom:

1. Turn VDC off
2. Adjust the wheel-slip amount using the cruise control accel/decel. When you press up or down, you'll see the current value displayed on the oil temp gauge. It ranges from 0 to 100% (i.e. off to no-wheel slip) depending on what you set it at. I usually start around 50% and adjust from there. You can change it anytime the car is on.

Actually toe is the greatest influence on wear I forget the actual equation or saying but it’s always x amount of toe is worth more than x amount of camber but yes all his angles are completely...

Actually toe is the greatest influence on wear I forget the actual equation or saying but it’s always x amount of toe is worth more than x amount of camber but yes all his angles are completely...

I went the powertrix route because of Charles support and I’ve been happy with them but like most I don’t have anything to compare them against. The thing that turned me off to the V3’s were they...

I just went through my emails trying to find the template and it looks like I deleted it. You should reach out the Charles at powertrix he’s who I got the template from for my powertrix coil overs. ...

I just went through my emails trying to find the template and it looks like I deleted it. You should reach out the Charles at powertrix he’s who I got the template from for my powertrix coil overs. ...

I believe that was Mines?

I believe that was Mines?

I believe that was Mines?

I believe that was Mines?

I’m not sure anyone was ever able to get them. Ohlins sat on their *** forever not offering an option for the 370z which was bizarre on its own and then by the time they got around to it everyone...

Ok so I now have ecutek tune and really liking it but have not pushed the car yet (no track days coming up soon). I am still a bit confused on the traction control feature. So the way mine is set...

They can also effect idle quality and deceleration dips sometimes. A buddy in the past put a very light racing one on his car (not a z) and then it would dip past desired idle and almost stall (or...

They can also effect idle quality and deceleration dips sometimes. A buddy in the past put a very light racing one on his car (not a z) and then it would dip past desired idle and almost stall (or...

Yea the bmw towers and subframes were too thin so thats not exactly a fair comparison because they crack even with stock form. Maybe I wasn’t clear in my description of his explanation but he was...

Yea the bmw towers and subframes were too thin so thats not exactly a fair comparison because they crack even with stock form. Maybe I wasn’t clear in my description of his explanation but he was...