CBRich

still waiting on a tracking number please

do you still have them calipers and rotors? if so how much?

My garage floor was pretty much new but I have a friend who had success with a very rough floor. My floor has held up very well for the two years I have had it. I do have some chipping on spots where I often slide my jack but that's about it.

I just saw your pictures and your garage floor looks great. I've heard mixed reviews on epoxy coatings and am hoping you can give me an honest opinion. Did your floor have any concrete problems? ... mine has some surface crumbling due to winter salt melting off the car. How long does this process take? About how much $$ for a 2-car garage? Would you do it again? Any other things to be aware of?

Thanks.

Mark

I'm in Greenville.

I see you live in SC what part?

I don't see why you couldn't just insert a resistor into the end of the plug still in the car, but using the factory plug seems to be cleaner and more secure. Of course airbags are worth a lot of...

Let me just add that if you don't have an impact gun then the lower strut bolt will be a serious pain. I was able to break the torque on it by placing a 22mm wrench on the side closest to the front...

You played the cute girl thing wrong. You should have told her that your sports car was at home but you were driving the Versa to "be green."

The best? Not sure, haven't tried them all. I do like the Nismo knob though. A little more heft and a better overall feel in my opinion. One downside? It gets really hot in summer and really...

Forgot to add this earlier but here is the technique I used to get the nut off without destroying it. Before you even start to loosen the nut just take your Dremel and cut a slot in the bolt. Then...

You played the cute girl thing wrong. You should have told her that your sports car was at home but you were driving the Versa to "be green."

Every mechanic knows everything. I believe in test results, not the preference of a mechanic.

I hate Nissan too because I got a part from another company that was not put together properly. My logic is flawless.

Service engine soon is a different light than the service reminder light.

http://www.camaro5.com/forums/attachment.php?attachmentid=54416&stc=1&d=1252898537

Let me just add that if you don't have an impact gun then the lower strut bolt will be a serious pain. I was able to break the torque on it by placing a 22mm wrench on the side closest to the front...

What you are seeing is simply condensation inside the exhaust turning into vapor from the heat. Mod beat me to it.

What you are seeing is simply condensation inside the exhaust turning into vapor from the heat. Mod beat me to it.

Let me just add that if you don't have an impact gun then the lower strut bolt will be a serious pain. I was able to break the torque on it by placing a 22mm wrench on the side closest to the front...

You played the cute girl thing wrong. You should have told her that your sports car was at home but you were driving the Versa to "be green."