The Sophia Project

DEpointfive0 · 07-23-2014, 12:07 AM

Quote:

Originally Posted by SS_Firehawk

It was the stock pump. The assembly was modified and there were some parts still on there from the failed fuel pump install. It basically stopped any hopes of a warranty taking care of it. After the wifey cools off with this last round of fails, I'm going to try again. It may not be until September though.

;-(

Anything we can do to help?

SS_Firehawk · 07-23-2014, 11:48 AM

Quote:

Originally Posted by DEpointfive0

;-(

Anything we can do to help?

Thanks for the support. I'll be fine. Just have to try to reinstall that RRP some other time. Anderson Nissan got back and they are getting an estimate on the repair from a local body shop. I finally got my old warranty checks from my other cars, so that covered the bill. Now back to packing my house.

SS_Firehawk · 07-30-2014, 07:02 PM

Soooo, just an FYI. I went and got my oil changed today. It was supposed to be all paid for by my MPP platinmum coverage service package. After arguing with the service shop the technicalities of what's recommended, what's required and MPP listing that they do what Nissan recommends, I had to fork over an extra $80 to upgrade to the ester oil. Irritated, I called MPP and asked them to clarify what "recommended" means to them. Recommended is considered what Nissan requires, not recommends. Now after that he says that they will do the ester upgrade at the recommended intervals of 6 months or 7500 miles.

The dealership did the oil change as a complimentary one on the house, but with the upgrade charge. IF I had known all this before, I would have told them to call MPP and get me going on the ester intervals.

Hotrodz · 07-30-2014, 07:27 PM

Another stealerships story! Sorry man....

SS_Firehawk · 08-04-2014, 04:06 PM

I swear, idk wtf is going on with this car. I was driving through death valley as I detoured from my normal boring drive to Reno and a piece of my undertray comes loose and starts making this terrible sound as it scrapes across the pavement. It just so happens I brought it to the stealership to have my oil changed a few days prior. Absolutely irritating.

SS_Firehawk · 09-12-2014, 01:02 AM

Looks like I'm moving to Philidelphia soon. It's all but a done deal. Time to find a new shop and crew. Lets hope I don't get fist fxcked like I did in Phoenix. Cheers

DEpointfive0 · 09-12-2014, 03:52 AM

Quote:

Originally Posted by SS_Firehawk

Looks like I'm moving to Philidelphia soon. It's all but a done deal. Time to find a new shop and crew. Lets hope I don't get fist fxcked like I did in Phoenix. Cheers

WTF is going on?!?!?! AGAIN?!?!?! I wanted to meet you, but you keep going away dammit!!!

Mr.Squeeze · 09-12-2014, 03:47 AM

Welcome to the east coast I live about and hour and a half or so North from Philly .

Hotrodz · 09-12-2014, 02:42 PM

I was hoping you be lucky enough to stay out west. You are gonna have to find a winter beater and put your baby in hibernation!

Rusty · 09-12-2014, 03:59 PM

Look up RT Tuning. They're just outside of Philly,

Philly, "The city of brothers on drugs"! as what we call it over here on the west side of the state.

Remember, between Philly and Pittsburgh. You have Pennsytucky.

SS_Firehawk · 01-04-2015, 02:38 AM

Well, I tackled the AEM intake install. Hotrodz was awesome enough to give me his old set! I admit to being a bit nervous doing it myself and took my time with it. It took me a solid six hours. I was missing the new harness for the windshield washer pump so that's not working, I also had to use the filler neck to recut some new pieces for the breather tube on the driver side. The stuff was splitting on my first cut, so I had to use more than I wanted. The driver side bottom hanger and end of the tube were bent out of shape so I was wrestling to straighten both of those out as well. The reservoir is mounted and ready to go when I get a replacement harness in. For some reason one of the tubes were missing the AEM sticker. So after triple checking my handiwork, I ziptied odds and ends down and put it back together. I turned it on before buttoning up the front end and rev'd her a few times to see of the maf's were happy, if the engine sounded fine and for any vibrations. Everything sounded normal so I turned her off and finished putting everything back together. I do want to point out that the AC line is very close to the driver intake tube. I ensured the tube was tight in its mounting points and pulled the line away just enough to have 1/4" of clearance. After I cleaned everything up, I drove it a couple miles down the road to meet my wife for the games and everything ran like a champ. I still need to put in some good miles on it to check for any stumbling, throttle latency, and any other unwanted symptoms. I think I can finally start a new build thread for my new car. Next project is hopefully exhaust and oil cooler. If I blast through those just fine, I'll attempt to install the RRP myself. Anyways, a few pics of my handiwork.

SS_Firehawk · 01-04-2015, 01:55 PM

Well I'm getting stumbling after the intake install. These are fore a 2010 Nismo. Thinking maybe the eti modules aren't calibrated correctly for a 2013. I'll put more miles and confirm. The maf sensors were left in the stock intakes until I was ready to move them. After I moved them, I immedietly placed the filters on. This might accelerate my tuning time line.

Hotrodz · 01-04-2015, 07:47 PM

Glad you finally got the intakes installed...I hope you get the hesitation worked out, that's no fun!

Vbar · 01-09-2015, 12:15 PM

Nice build, r u looking to sell your old air intake

SS_Firehawk · 01-09-2015, 02:11 PM

Someone already bought my stock intakes and I was about to ship them out today, but hitting limp mode twice and my CES light coming on, I might just take them off for now, refund the guys money, and sell the AEM's to someone who has uprev. I'm about to move again and can't go out and spend the money on uprev and a tune.

07-30-2014, 07:02 PM	#3 (permalink)
SS_Firehawk A True Z Fanatic Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7336	Soooo, just an FYI. I went and got my oil changed today. It was supposed to be all paid for by my MPP platinmum coverage service package. After arguing with the service shop the technicalities of what's recommended, what's required and MPP listing that they do what Nissan recommends, I had to fork over an extra $80 to upgrade to the ester oil. Irritated, I called MPP and asked them to clarify what "recommended" means to them. Recommended is considered what Nissan requires, not recommends. Now after that he says that they will do the ester upgrade at the recommended intervals of 6 months or 7500 miles. The dealership did the oil change as a complimentary one on the house, but with the upgrade charge. IF I had known all this before, I would have told them to call MPP and get me going on the ester intervals. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

07-30-2014, 07:27 PM	#4 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	Another stealerships story! Sorry man.... __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

08-04-2014, 04:06 PM	#5 (permalink)
SS_Firehawk A True Z Fanatic Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7336	I swear, idk wtf is going on with this car. I was driving through death valley as I detoured from my normal boring drive to Reno and a piece of my undertray comes loose and starts making this terrible sound as it scrapes across the pavement. It just so happens I brought it to the stealership to have my oil changed a few days prior. Absolutely irritating. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

09-12-2014, 01:02 AM	#6 (permalink)
SS_Firehawk A True Z Fanatic Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7336	Looks like I'm moving to Philidelphia soon. It's all but a done deal. Time to find a new shop and crew. Lets hope I don't get fist fxcked like I did in Phoenix. Cheers __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

09-12-2014, 03:47 AM	#8 (permalink)
Mr.Squeeze A True Z Fanatic Join Date: Aug 2010 Location: Keystone state Posts: 1,209 Drives: 2010 370z Rep Power: 20154	Welcome to the east coast I live about and hour and a half or so North from Philly . __________________ Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

09-12-2014, 02:42 PM	#9 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	I was hoping you be lucky enough to stay out west. You are gonna have to find a winter beater and put your baby in hibernation! __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

09-12-2014, 03:59 PM	#10 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,573 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Look up RT Tuning. They're just outside of Philly, Philly, "The city of brothers on drugs"! as what we call it over here on the west side of the state. Remember, between Philly and Pittsburgh. You have Pennsytucky. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-04-2015, 02:38 AM	#11 (permalink)
SS_Firehawk A True Z Fanatic Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7336	Well, I tackled the AEM intake install. Hotrodz was awesome enough to give me his old set! I admit to being a bit nervous doing it myself and took my time with it. It took me a solid six hours. I was missing the new harness for the windshield washer pump so that's not working, I also had to use the filler neck to recut some new pieces for the breather tube on the driver side. The stuff was splitting on my first cut, so I had to use more than I wanted. The driver side bottom hanger and end of the tube were bent out of shape so I was wrestling to straighten both of those out as well. The reservoir is mounted and ready to go when I get a replacement harness in. For some reason one of the tubes were missing the AEM sticker. So after triple checking my handiwork, I ziptied odds and ends down and put it back together. I turned it on before buttoning up the front end and rev'd her a few times to see of the maf's were happy, if the engine sounded fine and for any vibrations. Everything sounded normal so I turned her off and finished putting everything back together. I do want to point out that the AC line is very close to the driver intake tube. I ensured the tube was tight in its mounting points and pulled the line away just enough to have 1/4" of clearance. After I cleaned everything up, I drove it a couple miles down the road to meet my wife for the games and everything ran like a champ. I still need to put in some good miles on it to check for any stumbling, throttle latency, and any other unwanted symptoms. I think I can finally start a new build thread for my new car. Next project is hopefully exhaust and oil cooler. If I blast through those just fine, I'll attempt to install the RRP myself. Anyways, a few pics of my handiwork. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

01-04-2015, 01:55 PM	#12 (permalink)
SS_Firehawk A True Z Fanatic Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7336	Well I'm getting stumbling after the intake install. These are fore a 2010 Nismo. Thinking maybe the eti modules aren't calibrated correctly for a 2013. I'll put more miles and confirm. The maf sensors were left in the stock intakes until I was ready to move them. After I moved them, I immedietly placed the filters on. This might accelerate my tuning time line. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

01-04-2015, 07:47 PM	#13 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	Glad you finally got the intakes installed...I hope you get the hesitation worked out, that's no fun! __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-09-2015, 12:15 PM	#14 (permalink)
Vbar Base Member Join Date: Oct 2014 Location: Staten Island New York Posts: 20 Drives: 2009 370z Rep Power: 12	Nice build, r u looking to sell your old air intake

01-09-2015, 02:11 PM	#15 (permalink)
SS_Firehawk A True Z Fanatic Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7336	Someone already bought my stock intakes and I was about to ship them out today, but hitting limp mode twice and my CES light coming on, I might just take them off for now, refund the guys money, and sell the AEM's to someone who has uprev. I'm about to move again and can't go out and spend the money on uprev and a tune. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
theDreamer's Silvia	theDreamer	Other Vehicles	43	03-01-2021 11:40 AM
CAN-bus project	Knio	Audio & Video	10	09-04-2013 07:21 PM
Project X	windex	Movies / Celebrity Gossip / Entertainment / Music	2	03-11-2012 02:16 PM
512 Project - ATX	theDreamer	Texas	20	06-28-2010 09:01 AM
Project Mu	MursePaolo	Brakes & Suspension	4	07-01-2009 02:00 AM