Rusty's Nismo Journal

Rusty · 01-18-2021, 10:49 PM

Quote:

Originally Posted by redondoaveb

I heard back from the company that makes the splitter I was looking at. They verified that their's is angled up also. They followed the conture of the existing diffuser. I thought about taking the diffuser off like you did and then installing their splitter but like you mentioned, the gap

That gap is a killer. I'm only up a few degrees. I can't raise the rear of the splitter up because of the way it is mounted. I have to lower the front and find something to fill the gap.

redondoaveb · 01-18-2021, 10:59 PM

Quote:

Originally Posted by Rusty

That gap is a killer. I'm only up a few degrees. I can't raise the rear of the splitter up because of the way it is mounted. I have to lower the front and find something to fill the gap.

Yep, once you take the diffuser off, you have to deal with the gap and if you keep the diffuser on then you have to try to find a way to angle it down in front which would be some kind of angled filler but then the splitter would be scraping all the time because it would be lower in the front.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
birdmanx1's Nismo Journal ...	birdmanx1	Member's 370Z Gallery	441	10-20-2012 03:47 PM
TROOPER's 370Z NISMO Journal	TROOPER	Member's 370Z Gallery	124	07-29-2011 09:17 AM
[Equinox] Nismo dyno progression journal	Equinox	Engine & Drivetrain	3	02-17-2011 03:11 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM