Rusty's Nismo Journal

Rusty

The right side duct was a pita to get it angled right. It was trial and fit. I ended up cutting the duct on an angle that would allow for clearance with the reducer and hose to pass the washer bottle. Took me about 3hrs to figure it out. So take your time and look on how you want to run the hose. you may end up cutting the duct and the reducer a couple of times to get it to fit.

On the left duct. I cut it to match the right duct. Just so they look the same. Oh, I used a 2 part epoxy for plastic to glue everything together.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

gurneyeagle

My god, you are as anal as I am!

Again, thanks for all the help. I'm getting close.

__________________
Waiting on the Z35! SOLD - 2011 Gun Metallic Touring 7AT w Sports Pkg & Nav, Nismo Bumper and Rims, RC Grille, RC Brake Ducts, H&R Spacers, Painted Door Hdls, GTR Start Button, Nav By-Pass, EVO R Fog Light, CF Ducktail, CF Interior Trim

Rusty

I'm worse!

Good for you.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Rusty

Here's a video from my 3rd session, at the end. Can't edit the video for the middle part. Which I did my best lap times, chasing a build mustang around. He couldn't get away from me, until he spun it.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html