O&G's Journal

O&G · 01-10-2013, 09:39 AM

Installing the fuel pump stabilizer today. Going to use a surge tank instead of the fuel cell and bulkhead. Less work and keeps the cost down while satisfying my needs.

sent from my Samsung Galaxy Note

O&G · 01-10-2013, 01:23 PM

Finished it up earlier this morning. Car seems to start much better with the 3 inch piping. Cleaned up most the wirring. Need to work on the vaccum lines and wirring in the engine bay a bit more.

sent from my Samsung Galaxy Note

O&G · 01-10-2013, 11:23 PM

Fully completed engine build, 7.0L of N/A Hell! I'm not sure on the numbers but I know it's upper 500 whp! Shiz nasty! Burgenholtz Racing & JTran ftw!

Walkaround Video:

Romping gears on the dyno:

Robert_K · 01-11-2013, 12:44 AM

LS7's love breather mods.

lhinojos · 01-11-2013, 03:25 AM

I know this is like way off topic from what this thread is currently talking about, but what size rims and tires are you running? (Assuming you still have the 5 spoke wheels on page one of this lol)

Amazing thread btw.

VDC_OFF · 01-11-2013, 03:59 AM

Quote:

Originally Posted by O&G

Installing the fuel pump stabilizer today. Going to use a surge tank instead of the fuel cell and bulkhead. Less work and keeps the cost down while satisfying my needs.

sent from my Samsung Galaxy Note

Oh is that where the fuel tank is, was looking for that when I had to find a way to drain my tank for HIN :P

Quote:

Originally Posted by O&G

Fully completed engine build, 7.0L of N/A Hell! I'm not sure on the numbers but I know it's upper 500 whp! Shiz nasty! Burgenholtz Racing & JTran ftw!

Walkaround Video:

Romping gears on the dyno:

Some reason this looks like cartown on my computer haha

98intrigue · 01-11-2013, 06:58 AM

Quote:

Originally Posted by O&G

Fully completed engine build, 7.0L of N/A Hell! I'm not sure on the numbers but I know it's upper 500 whp! Shiz nasty! Burgenholtz Racing & JTran ftw!

I'm such a flip flopper... this week, I've been on a kick of keeping the Viper and doing a build with heads/cam. 600whp NA sounds so good!

O&G · 01-11-2013, 09:34 AM

Quote:

Originally Posted by 98intrigue

I'm such a flip flopper... this week, I've been on a kick of keeping the Viper and doing a build with heads/cam. 600whp NA sounds so good!

Bring it to Texas!

O&G · 01-11-2013, 09:36 AM

Quote:

Originally Posted by lhinojos

I know this is like way off topic from what this thread is currently talking about, but what size rims and tires are you running? (Assuming you still have the 5 spoke wheels on page one of this lol)

Amazing thread btw.

I sold them to get some funds for this project. They were WORK Equips(no longer in production in these sizes and style), 20x9.5 Front 20x11 rears, not sure on the tires, pretty sure it was a weak *** 285 in the rear. I'll be going WAY MOAR BEEFY w/ my next setup!

O&G · 01-11-2013, 09:36 AM

Quote:

Originally Posted by Robert_K

LS7's love breather mods.

and Hi compression

Robert_K · 01-11-2013, 09:47 AM

Quote:

Originally Posted by O&G

and Hi compression

Yeap... Saw one on race fuel from LMR make 700+whp N/A/

98intrigue · 01-11-2013, 12:50 PM

Quote:

Originally Posted by O&G

Bring it to Texas!

If it wasn't so far! IF I decide to build it, I'd only be looking at 600whp...which is nothing remotely close to hang with the big boys in Texas.

You going to try to make it to ZDayz this year?

O&G · 01-11-2013, 01:16 PM

I ment 2 build it, but yea it is a good distance.

sent from my Samsung Galaxy Note

O&G · 01-15-2013, 12:21 AM

Finished ordering all the parts needed to assemble the motor. HP rod and main bearings w/ coatings, OEM oil pump, rear main seal, crank key, crankshaft oil hole plug and the thrust washers. JTran has all the ARP studs in stock and I have the rebuild gasket kit already. Hopefully all that crap will arrive when the pistons get here so we can tear down, and rebuild without waiting on anything. The spare block I purchased has been at the machine shop for about a week getting prepped for the rebuild. COMP Turbo is taking their sweet time upgrading/rebuilding my turbo, hopefully another week or so. JTran still needs to weld up a new turbo manifold as well. Lots to do!

Still debating on a fuel system, I have a few friends running setups from https://radiumauto.com/index.php?p=c...&parent=5&pg=1 ,probably doing something along this line with a CJM full return system.

Still debating on exhaust cams and upgraded springs/retainers. Seems pointless at this time as cam lift can still NOT be controlled w/ an UpRev tune, only cam timing. Haltech is said to be coming out with a unit with full VVEL control, I'm skeptical but JTran says it's going to happen.

Seat rails are coming from Bride in Japan so who knows....fml.

Get more updates when kool stuff starts happening.

O&G · 01-16-2013, 03:21 PM

car went to North Side Chassis today for roll cage design and install. Should be back in 10-14 days. By that time all motor crap and turbo should be here.

JTran and Burgenholtz are going to UpRev tomorrow so Ron can get up to speed with UpRev tuning. JTran is going to bug them about VVEL tuning, hopefully I'll get some fresh news on that.

01-10-2013, 11:23 PM	#303 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	Custom built JTran Z06 Fully completed engine build, 7.0L of N/A Hell! I'm not sure on the numbers but I know it's upper 500 whp! Shiz nasty! Burgenholtz Racing & JTran ftw! Walkaround Video: Romping gears on the dyno: __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

01-11-2013, 12:44 AM	#304 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 17	LS7's love breather mods. O&G likes this. __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

01-11-2013, 03:25 AM	#305 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	I know this is like way off topic from what this thread is currently talking about, but what size rims and tires are you running? (Assuming you still have the 5 spoke wheels on page one of this lol) Amazing thread btw. O&G likes this.

01-11-2013, 01:16 PM	#313 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	I ment 2 build it, but yea it is a good distance. sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

01-15-2013, 12:21 AM	#314 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	All engine rebuild parts ordered Finished ordering all the parts needed to assemble the motor. HP rod and main bearings w/ coatings, OEM oil pump, rear main seal, crank key, crankshaft oil hole plug and the thrust washers. JTran has all the ARP studs in stock and I have the rebuild gasket kit already. Hopefully all that crap will arrive when the pistons get here so we can tear down, and rebuild without waiting on anything. The spare block I purchased has been at the machine shop for about a week getting prepped for the rebuild. COMP Turbo is taking their sweet time upgrading/rebuilding my turbo, hopefully another week or so. JTran still needs to weld up a new turbo manifold as well. Lots to do! Still debating on a fuel system, I have a few friends running setups from https://radiumauto.com/index.php?p=c...&parent=5&pg=1 ,probably doing something along this line with a CJM full return system. Still debating on exhaust cams and upgraded springs/retainers. Seems pointless at this time as cam lift can still NOT be controlled w/ an UpRev tune, only cam timing. Haltech is said to be coming out with a unit with full VVEL control, I'm skeptical but JTran says it's going to happen. Seat rails are coming from Bride in Japan so who knows....fml. Get more updates when kool stuff starts happening. Boost_lee, Mr&Mrs and GaleForce like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

01-16-2013, 03:21 PM	#315 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	car went to North Side Chassis today for roll cage design and install. Should be back in 10-14 days. By that time all motor crap and turbo should be here. JTran and Burgenholtz are going to UpRev tomorrow so Ron can get up to speed with UpRev tuning. JTran is going to bug them about VVEL tuning, hopefully I'll get some fresh news on that. wheee!, Mr&Mrs and GaleForce like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tag journal with car color	bflosabre91	The370Z.com Feedback, Suggestions & Questions	1	05-12-2011 12:46 PM
Tsolin01's Journal	tsolin01	Member's 370Z Gallery	25	04-24-2011 08:12 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM
tao168's Journal	tao168	Member's 370Z Gallery	12	06-14-2010 08:19 AM