Madwi's picture dump and crap

Zoren 370 · 02-23-2019, 04:06 AM

Would it be ready by Zday?

madwi · 02-23-2019, 04:13 AM

Quote:

Originally Posted by Zoren 370

Would it be ready by Zday?

That is the big question. If everything goes smooth and no major hiccups, then yes, I believe it will be.

Zoren 370 · 02-23-2019, 04:35 AM

Quote:

Originally Posted by madwi

That is the big question. If everything goes smooth and no major hiccups, then yes, I believe it will be.

It better be because that would be the bridal car for Big Sharon and EWs wedding!

madwi · 02-23-2019, 04:36 AM

Quote:

Originally Posted by Zoren 370

It better be because that would be the bridal car for Big Sharon and EWs wedding!

Spooler has the horse trailer and truck to tow them.

madwi · 02-24-2019, 09:27 AM

Dropped the oem front sway bar. Teflon taped the bar and will grease the tape and bushings before installing onto the Hotchkis bar. This thing is beefy compared to oem!.
I am wondering when I pull the OEM endlinks out if that is going to cause the shock to drop a bit and make getting the new ones in a pain. Not sure how I am going to configure something to raise the suspension back up a hair while the car is on the lift.

madwi · 02-24-2019, 09:49 AM

Picked up a can of Rust-oleum Cold galvanizing spray. Will hit the hood where I cut out for the vents and then I can rivet them in place.

bunk · 02-24-2019, 09:53 AM

Quote:

Originally Posted by madwi

Not sure how I am going to configure something to raise the suspension back up a hair while the car is on the lift.

Use 2x4 or 4x4 posts?

madwi · 02-24-2019, 09:55 AM

Quote:

Originally Posted by bunk

Use 2x4 or 4x4 posts?

pretty much what I was thinking. Not sure if I have space with the runway on lift or not. It just started freezing rain and snow and I dont want to walk back out to the garage to look at it.

bunk · 02-24-2019, 09:59 AM

Quote:

Originally Posted by madwi

pretty much what I was thinking. Not sure if I have space with the runway on lift or not. It just started freezing rain and snow and I dont want to walk back out to the garage to look at it.

First world problems must be nice! Im struggling to get the Z on 4 jackstands..lol

madwi · 02-24-2019, 11:16 AM

Quote:

Originally Posted by bunk

First world problems must be nice! Im struggling to get the Z on 4 jackstands..lol

It's pretty neat to be honest. Treat yourself to the quick jack! You know you want it.

( Click to show/hide )

Rusty · 02-24-2019, 01:53 PM

Quote:

Originally Posted by madwi

Dropped the oem front sway bar. Teflon taped the bar and will grease the tape and bushings before installing onto the Hotchkis bar. This thing is beefy compared to oem!.
I am wondering when I pull the OEM endlinks out if that is going to cause the shock to drop a bit and make getting the new ones in a pain. Not sure how I am going to configure something to raise the suspension back up a hair while the car is on the lift.

If you are replacing the end links. You have to let the tires hang down. All of the front end weight is on the long bolts for the lower coil-over/end link bolt.

madwi · 02-24-2019, 02:43 PM

Quote:

Originally Posted by Rusty

If you are replacing the end links. You have to let the tires hang down. All of the front end weight is on the long bolts for the lower coil-over/end link bolt.

That’s what I was thinking.

bunk · 02-24-2019, 03:27 PM

Quote:

Originally Posted by madwi

It's pretty neat to be honest. Treat yourself to the quick jack! You know you want it.

( Click to show/hide )

I really cant justify spending 1k+ on something I'll only use a couple times...I have ramps that are simple enough for oil changes.... BUT then again, it IS from Costco... so theres that!

madwi · 02-25-2019, 03:39 AM

Quote:

Originally Posted by bunk

I really cant justify spending 1k+ on something I'll only use a couple times...I have ramps that are simple enough for oil changes.... BUT then again, it IS from Costco... so theres that!

Just think of the savings you will have when you decide to install some mods yourself! It could pay for itself very fast!

madwi · 03-08-2019, 04:52 PM

My impulse buy was delivered today. Coolerworx.

02-24-2019, 09:27 AM	#455 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,400 Drives: Granma red Z Rep Power: 2684428	Dropped the oem front sway bar. Teflon taped the bar and will grease the tape and bushings before installing onto the Hotchkis bar. This thing is beefy compared to oem!. I am wondering when I pull the OEM endlinks out if that is going to cause the shock to drop a bit and make getting the new ones in a pain. Not sure how I am going to configure something to raise the suspension back up a hair while the car is on the lift. gbrettin, Rusty, Hotrodz and 1 others like this.

02-24-2019, 09:49 AM	#456 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,400 Drives: Granma red Z Rep Power: 2684428	Picked up a can of Rust-oleum Cold galvanizing spray. Will hit the hood where I cut out for the vents and then I can rivet them in place. Rusty and old guy like this.

03-08-2019, 04:52 PM	#465 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,400 Drives: Granma red Z Rep Power: 2684428	My impulse buy was delivered today. Coolerworx. gbrettin, jwick, Rusty and 4 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 10:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 09:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 04:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 08:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 10:45 AM

02-23-2019, 04:06 AM	#451 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Would it be ready by Zday?