My New Project Nismo 370Z 6MT w/Tech

diego@vossen · 12-06-2016, 12:40 PM

Quote:

Originally Posted by BboyZ

Nice, wheels. I'm really digging it.

On the suspension, I was looking at the same coilovers. but since my car will be mostly street I went to FLEX Z coilovers.

Thanks man. Hope to drop the Z off tomorrow to get the coils on. I will let everyone know how they ride.

diego@vossen · 12-07-2016, 11:03 AM

RS*R Sports*i drop is in progress.

Flares must come off!

Slammered Inc.

Max drop with RS*R but I think it's perfect!

carlitos_370z · 12-07-2016, 01:17 PM

Nice build man!

diego@vossen · 12-07-2016, 01:50 PM

Coils are in. Car is very dirty!

I am told front/rear is maxed out so can't go lower. I do need to correct camber especially on rear. Still going to adjust, maybe raise rear a tad. We'll see gonna get rear camber kit/toe bolts on and align first see how it all turns out. I don't like the front higher than rear personally so hoping after the camber correction on rear it's either even out on height or will raise rear a tad.

BboyZ · 12-07-2016, 02:12 PM

Much better when the flare is out.. Nice!!!

diego@vossen · 12-07-2016, 02:22 PM

Quote:

Originally Posted by BboyZ

Much better when the flare is out.. Nice!!!

Thank you. Yeah those had to go, they were bugging me a lot lol. I tried to get use to them and couldn't.

PearlyladyZ · 12-07-2016, 08:52 PM

Hey long shot but do you still have your fender flares laying around and maybe I could get them off you? I live in Oregon and because of the weather my front wheels splatter mud all over the side of my car.

Sent from my iPhone using Tapatalk

diego@vossen · 12-07-2016, 11:07 PM

I have them available if interested.

PearlyladyZ · 12-08-2016, 12:10 AM

Quote:

Originally Posted by diego@vossen

I have them available if interested.

Very.

Sent from my iPhone using Tapatalk

PearlyladyZ · 12-08-2016, 12:11 AM

Quote:

Originally Posted by diego@vossen

I have them available if interested.

But they aren't a necessity so I'm not going to spend a ton.

Sent from my iPhone using Tapatalk

DPE G · 12-08-2016, 09:41 AM

Needs the VWS-2. You know I'm a fan of an open 5 spoke but they just don't work for me on this.

diego@vossen · 12-08-2016, 11:51 AM

Quote:

Originally Posted by DPE G

Needs the VWS-2. You know I'm a fan of an open 5 spoke but they just don't work for me on this.

Will most likely try those out. We have not seen VWS-1, 2 or 3 on a Z so I will run through each design and photo-shoot.

diego@vossen · 12-08-2016, 11:52 AM

Quote:

Originally Posted by PearlyladyZ

But they aren't a necessity so I'm not going to spend a ton.

Sent from my iPhone using Tapatalk

I will let you know.

Open to reasonable offers. Shoot me a PM!

diego@vossen · 12-12-2016, 01:15 PM

SPC Camber/Toe Bolts arrived today and will be installed and aligned. Decided only to buy the rear. Maybe later I will get the front but my main concern was the rear. Here are a few pics over the weekend before I align.

Visited my detailer also who will make the Z flawless. The car brand new from the dealer came with to many swirls/scratches that bothered me. I expected this though since usually "detailers" at sea;reships are not the best. Will be perfect soon thanks to @ProficientX here in South Florida.

All 5K VLED's are installed including the reverse lights that were annoying to install lol. GT-R was 100x easier but had to have them so whatever.

Overlimit · 12-12-2016, 01:40 PM

Looks good! How did you install the front lights? Did you have to take the wheel off to remove the fender?

12-07-2016, 11:03 AM	#47 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 13	RSR Sportsi drop is in progress. Flares must come off! Slammered Inc. Max drop with RS*R but I think it's perfect! carlitos_370z and Memphis370Z like this.

12-07-2016, 01:17 PM	#48 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	Nice build man! diego@vossen likes this.

12-07-2016, 01:50 PM	#49 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 13	Coils are in. Car is very dirty! I am told front/rear is maxed out so can't go lower. I do need to correct camber especially on rear. Still going to adjust, maybe raise rear a tad. We'll see gonna get rear camber kit/toe bolts on and align first see how it all turns out. I don't like the front higher than rear personally so hoping after the camber correction on rear it's either even out on height or will raise rear a tad. carlitos_370z, BrockDM1, AntiVenom and 1 others like this. Last edited by diego@vossen; 12-07-2016 at 02:13 PM.

12-08-2016, 09:41 AM	#56 (permalink)
DPE G Track Member Join Date: Apr 2012 Location: Pensacola FL Posts: 747 Drives: 2015 PW Nismo Tech Rep Power: 303	Needs the VWS-2. You know I'm a fan of an open 5 spoke but they just don't work for me on this. Nithmo likes this. __________________ \| 2015 Nismo \| DPE \| AirLift \| SPL \| StopTech \| Toyo \| Motordyne \| Tommy Kiara \| Amuse \| ARC \| Top Secret \| Stillen \| Hotchkiss \|

12-12-2016, 01:15 PM	#59 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 13	SPC Camber/Toe Bolts arrived today and will be installed and aligned. Decided only to buy the rear. Maybe later I will get the front but my main concern was the rear. Here are a few pics over the weekend before I align. Visited my detailer also who will make the Z flawless. The car brand new from the dealer came with to many swirls/scratches that bothered me. I expected this though since usually "detailers" at sea;reships are not the best. Will be perfect soon thanks to @ProficientX here in South Florida. All 5K VLED's are installed including the reverse lights that were annoying to install lol. GT-R was 100x easier but had to have them so whatever. 370zHawaii, carlitos_370z and BboyZ like this. Last edited by diego@vossen; 12-12-2016 at 01:20 PM.

12-07-2016, 02:12 PM	#50 (permalink)
BboyZ Enthusiast Member Join Date: Aug 2015 Location: Arizona Posts: 446 Drives: 2016 Z34 Nismo Rep Power: 9	Much better when the flare is out.. Nice!!!

12-07-2016, 08:52 PM	#52 (permalink)
PearlyladyZ Base Member Join Date: Apr 2016 Location: Eugene Oregon Posts: 56 Drives: 10 Nissan 370Z PW M6 Rep Power: 9	Hey long shot but do you still have your fender flares laying around and maybe I could get them off you? I live in Oregon and because of the weather my front wheels splatter mud all over the side of my car. Sent from my iPhone using Tapatalk

12-07-2016, 11:07 PM	#53 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 13	I have them available if interested.

12-12-2016, 01:40 PM	#60 (permalink)
Overlimit Base Member Join Date: Jun 2010 Location: 951 Posts: 151 Drives: F80 M3 Rep Power: 32	Looks good! How did you install the front lights? Did you have to take the wheel off to remove the fender?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My New Nismo 370Z 6MT w/Tech	diego@vossen	New Nismo 370Z Owner	21	11-30-2016 01:17 PM
2016 Touring + mods or Sport Tech or Nismo Tech?	STICK_SHIFT	Nissan 370Z General Discussions	34	07-10-2015 08:21 PM
New 370z Nismo Tech Owner	SeanZ	New 370Z Owner	8	01-10-2015 10:54 PM
BMW E92 M3 or Nismo 370z Tech?	ouchie	Nissan 370Z General Discussions	140	10-18-2014 11:36 AM