Elmo's Struggling Journal

Elmo370z · 03-22-2018, 03:06 AM

Quote:

Originally Posted by Rusty

You have any more pic's of your install? And which rear diff cover you using? Stock or Z1, or Nismo? I'm installing mine now. Should be done today. I'm using the Z1 cover and figured out how to use the top return port.

I'll post pic's in my install thread.

I’m using the stupid stock pumpkin. I’ll jack the car up tomorrow and take some pictures for you.

Rusty · 03-22-2018, 01:18 PM

You're using the stock diff cover. You don't have to post pic's on it. It doesn't apply to me. I'm using the Z1 cover with the extra hole in the side. I was told that I couldn't use that hole for return because the axle sensor is in the way. I found a way to use it with a banjo fitting. If you want. You can post your pic's in my thread of your install. To show how you did it with the stock cover.

MA Motorsports Diff Cooler Install

Elmo370z · 04-05-2018, 04:38 PM

New rotors soon to be installed, hope this cryo treatment works out.

Elmo370z · 04-23-2018, 11:01 AM

So picked up a set of heads. Decisions decisions

gbrettin · 04-23-2018, 11:31 AM

Quote:

Originally Posted by Elmo370z

So picked up a set of heads. Decisions decisions

Gonna have RJM do some head work?

Sent from my SM-G930P using Tapatalk

Spooler · 04-23-2018, 11:49 AM

Quote:

Originally Posted by gbrettin

Gonna have RJM do some head work?

Sent from my SM-G930P using Tapatalk

Man I hope not. LOL

Elmo370z · 04-23-2018, 03:03 PM

Quote:

Originally Posted by Spooler

Man I hope not. LOL

It crossed my mind lol. No they will be sitting on the shelf until the Vr head bolt conversion gets up and running. I’ll let MaMotorsports be the judge of doing any head work.

Elmo370z · 05-15-2018, 03:02 PM

Was going to wait until after z days, but I got a itch and install the new soho motorsports VHR catch can kit

Rusty · 05-15-2018, 07:49 PM

Nice.

Elmo370z · 05-15-2018, 09:52 PM

Quote:

Originally Posted by Rusty

Nice.

If you see a light skinned fella with a red book bag stop him and say hi.

Rusty · 05-15-2018, 10:32 PM

Quote:

Originally Posted by Elmo370z

If you see a light skinned fella with a red book bag stop him and say hi.

Me and wifey.

Elmo370z · 05-22-2018, 03:25 AM

Quote:

Originally Posted by Rusty

Me and wifey.

Nice to finally meet the legendary Rusty and his wife. Thanks for the moonshine.

Rusty · 05-22-2018, 09:32 AM

Quote:

Originally Posted by Elmo370z

Nice to finally meet the legendary Rusty and his wife. Thanks for the moonshine.

They drank all of the moonshine, and ate all of the cherries that was in the moonshine.

JARblue · 05-22-2018, 09:54 AM

It was great meeting you and checking out the car

Sort of surprised I even remember that. I was in a special place that night

Elmo370z · 05-22-2018, 10:28 AM

Quote:

Originally Posted by JARblue

It was great meeting you and checking out the car

Sort of surprised I even remember that. I was in a special place that night

Likewise. Bahahah yeah. You and me both. I’m still in recovery mode.

03-22-2018, 01:18 PM	#92 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,848 Drives: 2011 Nismo GM 6M Rep Power: 2684436	You're using the stock diff cover. You don't have to post pic's on it. It doesn't apply to me. I'm using the Z1 cover with the extra hole in the side. I was told that I couldn't use that hole for return because the axle sensor is in the way. I found a way to use it with a banjo fitting. If you want. You can post your pic's in my thread of your install. To show how you did it with the stock cover. MA Motorsports Diff Cooler Install Elmo370z likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

05-15-2018, 07:49 PM	#99 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,848 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Nice. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

05-22-2018, 09:54 AM	#104 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	It was great meeting you and checking out the car Sort of surprised I even remember that. I was in a special place that night __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
Still struggling to justify a new 2014 370Z	ZeeBabar	Nissan 370Z General Discussions	33	07-29-2014 08:29 AM
New to the forum... struggling..	Samjam1	Exterior & Interior	4	04-20-2013 10:53 PM
My Journal gone	SPOHN	The370Z.com Feedback, Suggestions & Questions	12	11-13-2012 02:12 AM
High RPMS sounds like its struggling	RedBullRR	Engine & Drivetrain	4	11-13-2010 08:52 AM