Lets talk science, Stillen Gen3 Intake

Originally Posted by synolimit

I was getting to that keeping the compressor cooler with cooler air is always better. Bringing in 60 degree ambient temp vs 200 engine bay temps will always add HP! Doesn't matter if it has a intercooler or not. Starting at a lower charged temp vs a higher one will yield in a cold side intercooler with cooler denser temps. On my cars colder air didn't add psi as I was ecu and waste gate psi controlled, but using your example "you may get 1 more psi," I don't know about you but my turbos psi ran me 15-20 more HP!!! I'll take that all day long to put the filter in a cai vs a sri.

But if you already have a IC you're not going to buy another one. And again it does make a difference no matter the IC! If its 60 degrees out, a compressor is 250 degrees, that mix goes through the IC, and out the other side pops out 65 degrees it makes a huge difference vs you put the filter in the engine bay where its 200 degrees, the compressor is again 250 degrees, that mixes and goes through the IC and out pops 90 degrees this time. 30 degree intake temps is huge in HP! I've seen 20-30 HP swings playing with this stuff on my WRX's while tuning them.