Interest in a DIY Muffler Delete Pipes?

RonRizz · 01-05-2013, 08:03 PM

More washers louder exhaust!!

RonRizz · 01-05-2013, 08:06 PM

http://www.telusplanet.net/public/ku...bit_result.jpg how about this instead.........

Japanjay · 01-05-2013, 08:08 PM

How are you going to buy Okyno 7.1ch and then skrimp on $20. That thing set you back what ~$400 new, should have got something a touch cheaper and put it towards a welder.

Mike · 01-05-2013, 08:39 PM

similar to mine, but I have two 12" glasspacks, because its all straight pipes from the headers back.

chrischhorn · 01-05-2013, 10:37 PM

Quote:

Originally Posted by Mike

similar to mine, but I have two 12" glasspacks, because its all straight pipes from the headers back.

I disagree mike....yours is completely different lol. Glass packs are legit and yours is straight pipe compared to his just being axle backs. a full set up as such to reduce weight and make noise is a big difference.

HArturo319 · 01-05-2013, 11:31 PM

sooooo don't do this to a NISMO exhaust

chrischhorn · 01-05-2013, 11:37 PM

Quote:

Originally Posted by HArturo319

sooooo don't do this to a NISMO exhaust

you can... you'll just get flamed worse for buying a nismo and doing it... you have been warned lol

HArturo319 · 01-06-2013, 12:30 AM

Got it =)

luigi90210 · 01-06-2013, 04:14 AM

so is it bad if i were to buy some ebay mufflers and go to an exhaust shop and custom build axle back exhaust?

Kingbaby · 01-06-2013, 04:25 AM

This is a nominee for most retarded mods for 2013!

Track guy/shade tree mechanic or not this is just re re tard ed

Blatant disregard for delivery!

That's like saying I wanna remove weight for the track so chop the top off?

geddy lee · 01-08-2013, 12:01 PM

Looks like the exhaust I have on my dryer down in the basement

ResIpsa · 01-08-2013, 12:43 PM

I am so glad I started this thread. This is hilarious!

I hope you know that my use of cheap bends actually cheapens YOUR 370Z! I know that this haunts you and has prevented you from sleeping since my first post.

You guys are such a bunch of prima donnas!

And Mike, I love the exhaust. What I thought you guys would see is that it is possible to easily develop and install a muffler delete on our cars. The main problem is that you normally need to weld flanges on to the exhaust to connect to the mid pipe section. But I found a way to do it without welding. Check my upcoming DIY. I like creating things on my own. Keep in mind that I developed the first brake cooling duct DIY more than a year before Stillen had its kit.

I can swap out my muffler in less than 20 minutes at the track for some great sound. In hindsight, I guess I should have posted this thread in the track section.

Sh0velMan · 01-08-2013, 01:26 PM

You guys ripping on this dude for kludging something together for the track is pretty funny to me.

It's his car, he can do what he wants. At least he takes it to the track, makes whatever he does to the car in the name of tracking a thousand percent more 'legit' than what most of you inflict upon your cars.

Seriously. I'm as critical as it comes of other people's cars, but this guy doesn't deserve the lambasting he's getting for sharing his winter project with you jerks.

SouthArk370Z · 01-08-2013, 01:32 PM

Is it ugly as homemade sin? Yes
Is it something I would do to my car? No
Does it accomplish what the OP set out to do? YES

Nice project. As I said, not something I would do, but it shows a certain amount of good old Yankee ingenuity. Ignore the naysayers and keep experimenting.

b1adesofcha0s · 01-08-2013, 01:45 PM

Quote:

Originally Posted by SouthArk370Z

Is it ugly as homemade sin? Yes
Is it something I would do to my car? No
Does it accomplish what the OP set out to do? YES

Nice project. As I said, not something I would do, but it shows a certain amount of good old Yankee ingenuity. Ignore the naysayers and keep experimenting.

I think it's a cool little project to do if you're bored and glad it worked out for OP. Just like with your home made splitter and diffuser, they may not be the prettiest looking parts, but they do what they're supposed to. I'd love to hear a sound clip of it.

I wanted to do custom short tails to use with my Berk CBE, but I'll probably have one made by an exhaust shop if I decide to get one.

01-05-2013, 08:03 PM	#16 (permalink)
RonRizz A True Z Fanatic Join Date: Aug 2011 Location: Pine grove, Pa Posts: 2,132 Drives: 2 feet, 3 pedals Rep Power: 6774	More washers louder exhaust!! __________________ P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

01-05-2013, 08:06 PM	#17 (permalink)
RonRizz A True Z Fanatic Join Date: Aug 2011 Location: Pine grove, Pa Posts: 2,132 Drives: 2 feet, 3 pedals Rep Power: 6774	http://www.telusplanet.net/public/ku...bit_result.jpg how about this instead......... DEpointfive0 likes this. __________________ P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

01-05-2013, 08:39 PM	#19 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	similar to mine, but I have two 12" glasspacks, because its all straight pipes from the headers back. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

01-05-2013, 11:31 PM	#21 (permalink)
HArturo319 Enthusiast Member Join Date: Jun 2012 Location: Houston, TX Posts: 323 Drives: 2013 PW NISMO Rep Power: 12	sooooo don't do this to a NISMO exhaust __________________ Me And Zoloft Get Along Just Fine

01-06-2013, 12:30 AM	#23 (permalink)
HArturo319 Enthusiast Member Join Date: Jun 2012 Location: Houston, TX Posts: 323 Drives: 2013 PW NISMO Rep Power: 12	Got it =) __________________ Me And Zoloft Get Along Just Fine

01-05-2013, 08:08 PM	#18 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	How are you going to buy Okyno 7.1ch and then skrimp on $20. That thing set you back what ~$400 new, should have got something a touch cheaper and put it towards a welder.

01-06-2013, 04:14 AM	#24 (permalink)
luigi90210 A True Z Fanatic Join Date: Apr 2012 Location: San Diego CA Posts: 1,103 Drives: Classified Rep Power: 15	so is it bad if i were to buy some ebay mufflers and go to an exhaust shop and custom build axle back exhaust?

01-08-2013, 12:01 PM	#26 (permalink)
geddy lee Base Member Join Date: Mar 2012 Location: delaware Posts: 161 Drives: 350Z Rep Power: 13	Looks like the exhaust I have on my dryer down in the basement

01-08-2013, 12:43 PM	#27 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 337	I am so glad I started this thread. This is hilarious! I hope you know that my use of cheap bends actually cheapens YOUR 370Z! I know that this haunts you and has prevented you from sleeping since my first post. You guys are such a bunch of prima donnas! And Mike, I love the exhaust. What I thought you guys would see is that it is possible to easily develop and install a muffler delete on our cars. The main problem is that you normally need to weld flanges on to the exhaust to connect to the mid pipe section. But I found a way to do it without welding. Check my upcoming DIY. I like creating things on my own. Keep in mind that I developed the first brake cooling duct DIY more than a year before Stillen had its kit. I can swap out my muffler in less than 20 minutes at the track for some great sound. In hindsight, I guess I should have posted this thread in the track section. SouthArk370Z and b1adesofcha0s like this. __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/

01-08-2013, 01:26 PM	#28 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	You guys ripping on this dude for kludging something together for the track is pretty funny to me. It's his car, he can do what he wants. At least he takes it to the track, makes whatever he does to the car in the name of tracking a thousand percent more 'legit' than what most of you inflict upon your cars. Seriously. I'm as critical as it comes of other people's cars, but this guy doesn't deserve the lambasting he's getting for sharing his winter project with you jerks. SouthArk370Z, b1adesofcha0s and gr8-wrx like this. __________________ Buy My Car! \| Build Thread

01-08-2013, 01:32 PM	#29 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Is it ugly as homemade sin? Yes Is it something I would do to my car? No Does it accomplish what the OP set out to do? YES Nice project. As I said, not something I would do, but it shows a certain amount of good old Yankee ingenuity. Ignore the naysayers and keep experimenting. b1adesofcha0s and Sh0velMan like this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Custom Axle Back, Muffler Delete Pipes	370z40	Parts for sale (Private Classifieds)	10	09-06-2011 04:42 PM
Where to get pipes for muffler delete	onefastz	Intake/Exhaust	1	08-27-2011 01:13 AM
wtb muffler delete pipes	OKC Z	Wanted	10	03-31-2011 05:43 AM
WTB muffler delete pipes	xgrudgex	Wanted	10	07-24-2010 02:04 PM
FS: Custom pipes and tips (muffler delete)	spearfish25	Parts for sale (Private Classifieds)	17	03-21-2010 10:22 PM