Fast Intentions exhaust is here!

ProfessorDave · 09-01-2010, 12:27 PM

Quote:

Originally Posted by red6spd

Any updates? Tony you gonna get my exhaust here before Long Island blows away from this Hurricane. And if so will the shipping cost be more? LOL

Red6spd, the solution is obviously that Tony should ship my exhaust first (we're supposed to be safe here in PA), just to make sure that Earl is out to sea and Long Island is safe

johnnydrama · 09-01-2010, 03:58 PM

Check out my FI Exhaust
HD VIDEO Nismo 370z Take-off, Fly-by, Drifting

red6spd · 09-01-2010, 05:02 PM

Quote:

Originally Posted by ProfessorDave

Red6spd, the solution is obviously that Tony should ship my exhaust first (we're supposed to be safe here in PA), just to make sure that Earl is out to sea and Long Island is safe

Nooooooooo, I will get a boat and meet the UPS truck on the main land. lol

theDreamer · 09-01-2010, 06:54 PM

Quote:

Originally Posted by red6spd

Nooooooooo, I will get a boat and meet the UPS truck on the main land. lol

Sorry sir, you are no longer a citizen, you will have to fill out form 19a5F and wait three to six weeks for results.

ZRoland · 09-01-2010, 08:47 PM

Ok, finished the install a few minutes ago of my HFC, 18" res, cat-back exhaust. All I can say is WOW that is music to my ears. Took it for a test drive and seems the ECU has to relearn as large throttle lag in the begining but as I drove on it started to improve. OK, guys how long did it take your cars to have better response?
At WOT the power is incredible, quite different than the stock exhaust and the sound is excellent.
Installation, more trouble taking the stock cats out but after that everything went reall smooth. Only mod I might do is add a washer on the rear hanger. Tips are to close to the rear valence.

Tony, thanks for the excellent system. Keep up the good work and quality.

red6spd · 09-01-2010, 10:46 PM

Quote:

Originally Posted by ZRoland

Ok, finished the install a few minutes ago of my HFC, 18" res, cat-back exhaust. All I can say is WOW that is music to my ears. Took it for a test drive and seems the ECU has to relearn as large throttle lag in the begining but as I drove on it started to improve. OK, guys how long did it take your cars to have better response?
At WOT the power is incredible, quite different than the stock exhaust and the sound is excellent.
Installation, more trouble taking the stock cats out but after that everything went reall smooth. Only mod I might do is add a washer on the rear hanger. Tips are to close to the rear valence.

Tony, thanks for the excellent system. Keep up the good work and quality.

Hay got a question for you. Where exactly did you have to add the washer. Did you add the washer to where the mount bolts to the bottom of the car?

xdeslitx · 09-01-2010, 11:21 PM

Hey Tony can we get an update pleaseeee

Any possibility that mine will be ready for install before sept 18? Would love to have your exhaust for the canyon run.
Thanks

ZRoland · 09-01-2010, 08:49 PM

To all owners of verts the sound with the top-down is very nice and pleasant. Not to loud inside the car and the 18" reson are just right. Keep those heads turning as I passed by people.

ZRoland · 09-01-2010, 11:50 PM

Yes...2 inner mounts of the bracket where it hangs. I think I used a 5/16. Tighten the inner first then the out to where you want to level and adjust. This exhaust is phenomenal sound and performance. All I can say is WOW!!!!

red6spd · 09-02-2010, 12:32 AM

Quote:

Originally Posted by ZRoland

Yes...2 inner mounts of the bracket where it hangs. I think I used a 5/16. Tighten the inner first then the out to where you want to level and adjust. This exhaust is phenomenal sound and performance. All I can say is WOW!!!!

Ok so basically your bringing the exhaust down a little using washers correct. I'm hopefully getting my exhaust soon and I want to be prepared to install it right away. Thanks for the input. Lets get some pics up, I would like to see what this system looks like on a Vert

09-02-2010, 01:09 AM

Quote:

Originally Posted by red6spd

Hay got a question for you. Where exactly did you have to add the washer. Did you add the washer to where the mount bolts to the bottom of the car?

Quote:

Originally Posted by ZRoland

Yes...2 inner mounts of the bracket where it hangs. I think I used a 5/16. Tighten the inner first then the out to where you want to level and adjust. This exhaust is phenomenal sound and performance. All I can say is WOW!!!!

Can you take a picture or two of this? Thanks.

ProfessorDave · 09-02-2010, 07:15 AM

How much overtime do you guys think Tony's going to pay his crew to work through the holiday weekend?

Also craving an update

F.I. Inc. · 09-02-2010, 09:56 AM

Quote:

Originally Posted by ProfessorDave

How much overtime do you guys think Tony's going to pay his crew to work through the holiday weekend?

Also craving an update

Update coming soon! For the labor day overtime, not going to happen. It is hot here in California and we have all been working too hard. A nice little break to recharge the batteries is overdue.

ZRoland · 09-02-2010, 10:31 AM

I will take photos and post soon. It is raining here and as soon as the sun comes out so will pics.

TX_370 · 09-03-2010, 09:14 AM

Just a note from my experience, I had to break down and buy the Berk gaskets. I gave it 2 attempts to seal with high temp Silicon and it failed both times...

Other than that, I am extremely happy with the product and my experience with Tony and Fast Intentions.

09-01-2010, 03:58 PM	#2 (permalink)
johnnydrama Track Member Join Date: Feb 2010 Location: Bloomington, IN Age: 41 Posts: 606 Drives: Nismo & FPace SVR Rep Power: 2233	Check out my FI Exhaust HD VIDEO Nismo 370z Take-off, Fly-by, Drifting __________________ 358WHP/271WTQ BUILD THREAD

09-02-2010, 07:15 AM	#12 (permalink)
ProfessorDave A True Z Fanatic Join Date: Jul 2010 Location: Scranton, PA Posts: 1,580 Drives: In the fairway Rep Power: 20	How much overtime do you guys think Tony's going to pay his crew to work through the holiday weekend? Also craving an update __________________ Rain, snow, sleet, hail: 2009 Mazda 3 sGT HB Everything else: 2009 370z, PW Touring 6MT

09-03-2010, 09:14 AM	#15 (permalink)
TX_370 A True Z Fanatic Join Date: Apr 2009 Location: Texas Posts: 5,389 Drives: American Rep Power: 30	Just a note from my experience, I had to break down and buy the Berk gaskets. I gave it 2 attempts to seal with high temp Silicon and it failed both times... Other than that, I am extremely happy with the product and my experience with Tony and Fast Intentions. __________________ 2009 PW Nissan 370Z with Sports Package

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM

09-01-2010, 08:47 PM	#5 (permalink)
ZRoland Base Member Join Date: Jun 2010 Location: Dallas/Arkansas Posts: 120 Drives: 2010 370Z Roadster Rep Power: 16	Ok, finished the install a few minutes ago of my HFC, 18" res, cat-back exhaust. All I can say is WOW that is music to my ears. Took it for a test drive and seems the ECU has to relearn as large throttle lag in the begining but as I drove on it started to improve. OK, guys how long did it take your cars to have better response? At WOT the power is incredible, quite different than the stock exhaust and the sound is excellent. Installation, more trouble taking the stock cats out but after that everything went reall smooth. Only mod I might do is add a washer on the rear hanger. Tips are to close to the rear valence. Tony, thanks for the excellent system. Keep up the good work and quality.

09-01-2010, 11:21 PM	#7 (permalink)
xdeslitx A True Z Fanatic Join Date: Jul 2010 Location: Tu-jungle, CA Posts: 13,045 Drives: Yaris Rep Power: 64	Hey Tony can we get an update pleaseeee Any possibility that mine will be ready for install before sept 18? Would love to have your exhaust for the canyon run. Thanks

09-01-2010, 08:49 PM	#8 (permalink)
ZRoland Base Member Join Date: Jun 2010 Location: Dallas/Arkansas Posts: 120 Drives: 2010 370Z Roadster Rep Power: 16	To all owners of verts the sound with the top-down is very nice and pleasant. Not to loud inside the car and the 18" reson are just right. Keep those heads turning as I passed by people.

09-01-2010, 11:50 PM	#9 (permalink)
ZRoland Base Member Join Date: Jun 2010 Location: Dallas/Arkansas Posts: 120 Drives: 2010 370Z Roadster Rep Power: 16	Yes...2 inner mounts of the bracket where it hangs. I think I used a 5/16. Tighten the inner first then the out to where you want to level and adjust. This exhaust is phenomenal sound and performance. All I can say is WOW!!!!

09-02-2010, 10:31 AM	#14 (permalink)
ZRoland Base Member Join Date: Jun 2010 Location: Dallas/Arkansas Posts: 120 Drives: 2010 370Z Roadster Rep Power: 16	I will take photos and post soon. It is raining here and as soon as the sun comes out so will pics.