First look!!! Nismo CAI on Nismo Z...

Imperial · 08-23-2011, 09:29 PM

Coming soon to a dealer near you! (Sorry for the fuzzy iPhone pic)

seungklee · 08-23-2011, 09:41 PM

what are the gains? does it fit on regular Z's? how much?

azn370z · 08-23-2011, 09:42 PM

I like it but not the foam piece.
How about some info?

XwChriswX · 08-23-2011, 09:44 PM

Quote:

Originally Posted by azn370z

I like it but not the foam piece.
How about some info?

The foam piece is something you want. In the event of water being taken in the main filter, air is drawn from these filters instead to prevent hydro-lock. Ask anyone with injen intakes in a damp climate. They will ask for these lol

azn370z · 08-23-2011, 09:47 PM

Quote:

Originally Posted by XwChriswX

The foam piece is something you want. In the event of water being taken in the main filter, air is drawn from these filters instead to prevent hydro-lock. Ask anyone with injen intakes in a damp climate. They will ask for these lol

I know, but I read this also allows hot engine air to be sucked in.
And this is the reason you don't see anyone using the foam piece.

Imperial · 08-23-2011, 09:49 PM

Info:

Made by K&N; Foam piece is to comply with OE specifications required by Nissan; Gains?... no clue; How much?... free for me as the guinea pig ;-)

That's all I know.

XwChriswX · 08-23-2011, 09:51 PM

Quote:

Originally Posted by azn370z

I know, but I read this also allows hot engine air to be sucked in.
And this is the reason you don't see anyone using the foam piece.

Understandable, but which is more important? a few degrees higher IAT or your engine having a slurpiee??

Quote:

Originally Posted by Imperial

Info:

Made by K&N; Foam piece is to comply with OE specifications required by Nissan; Gains?... no clue; How much?... free for me as the guinea pig ;-)

That's all I know.

Well then go get your butt on a dyno! MEOW!

Imperial · 08-23-2011, 09:58 PM

Quote:

Originally Posted by XwChriswX

Understandable, but which is more important? a few degrees higher IAT or your engine having a slurpiee??

Well then go get your butt on a dyno! MEOW!

Alrighty meow!

Methodical4u · 08-23-2011, 10:05 PM

isn't this just an AEM or something with the Nismo logo on it? I thought I read that somewhere?

frostyrock7c · 08-23-2011, 10:06 PM

Looks good

FL 4Motion · 08-24-2011, 01:07 AM

dammit, I feel drawn toward these cause they'll go nicely with my car. Must resist and hold out for upcoming options...

Imperial · 08-24-2011, 06:39 AM

Quote:

Originally Posted by Methodical4u

isn't this just an AEM or something with the Nismo logo on it? I thought I read that somewhere?

Yes and no. AEM was part of the development but they still needed to make sure it complied with strict OE specifications. Apparently this has been in the works for a while Nissan just hasn't jumped the gun on it until now.

6spd · 08-24-2011, 07:58 AM

ohhhhhhhhh finally, subscribed!

somatic · 08-24-2011, 08:06 AM

so, itll be an overpriced cross between an AEM & K&N ? please report the gains as soon as you get them.

b1adesofcha0s · 08-24-2011, 08:08 AM

Quote:

Originally Posted by somatic

so, itll be an overpriced cross between an AEM & K&N ? please report the gains as soon as you get them.

Probably true though.

08-23-2011, 09:42 PM	#3 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	I like it but not the foam piece. How about some info? __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

08-23-2011, 10:06 PM	#10 (permalink)
frostyrock7c Base Member Join Date: Jul 2010 Location: Savannah, GA Posts: 120 Drives: 09 Nismo Silver Rep Power: 16	Looks good __________________ 2009 Nismo 370Z #0136 The past... 2008 STi stock thanks to questionable ringlands, 2005 STi modded and very fast, 2004.5 350Z modded and fast-ish

08-24-2011, 07:58 AM	#13 (permalink)
6spd A True Z Fanatic Join Date: Aug 2009 Location: South Florida Posts: 3,001 Drives: Q50RS Rep Power: 26	ohhhhhhhhh finally, subscribed! __________________ -Jay- jonathanjamesphotographer.com

08-24-2011, 08:06 AM	#14 (permalink)
somatic A True Z Fanatic Join Date: Aug 2011 Location: Grapevine, TX Posts: 1,767 Drives: 2013 GS350 Rep Power: 18	so, itll be an overpriced cross between an AEM & K&N ? please report the gains as soon as you get them. __________________ Passport 9500i HW\|Short Tail Exhaust\|Evo-r CF Fangs & Fog\|Blacked Out Roof\|Status Elite Intake 19/22\|AUTO Shift Boot DIY\|GTR Button\|Rear Limo Tint\|S2carbonworks hood dampeners\|Falken Rt-7m 20"s w/Jade Project Mu Tuner Lugs\|P:JDM Oil Cap\|Tow Hook\|SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wanted nismo rims for 370z and nismo stune rear spoiler	edphoenix01	New Nismo 370Z Owner	0	09-29-2010 06:44 PM
OEM 19" NISMO wheels by RAYS® (From 370Z Nismo)	Imperial	Parts for sale (Private Classifieds)	8	09-26-2010 02:01 AM
OEM 19" NISMO wheels by RAYS® (From 370Z Nismo)	Imperial	Parts for sale (Private Classifieds)	49	09-20-2010 08:13 PM

08-23-2011, 09:41 PM	#2 (permalink)
seungklee Enthusiast Member Join Date: Oct 2009 Location: SoCal Posts: 291 Drives: you around! Rep Power: 16	what are the gains? does it fit on regular Z's? how much?

08-23-2011, 09:49 PM	#6 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 487 Drives: 10 Nismo 370Z PW M6 Rep Power: 16	Info: Made by K&N; Foam piece is to comply with OE specifications required by Nissan; Gains?... no clue; How much?... free for me as the guinea pig ;-) That's all I know.

08-23-2011, 10:05 PM	#9 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 17	isn't this just an AEM or something with the Nismo logo on it? I thought I read that somewhere?

08-24-2011, 01:07 AM	#11 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701616	dammit, I feel drawn toward these cause they'll go nicely with my car. Must resist and hold out for upcoming options...