Z1 Cold Air Intake

VDesi07 · 12-06-2015, 04:41 PM

At the moment the silicone tubes are bending a little through the holes. I am considering going back and cutting the holes to eliminate the bend.

synolimit · 12-06-2015, 04:49 PM

Quote:

Originally Posted by VDesi07

At the moment the silicone tubes are bending a little through the holes. I am considering going back and cutting the holes to eliminate the bend.

I would. You have to remember the motor rocks a good bit. Every time you hit WOT and the motor rocks back and those tubes are being crushed in there, you're pushing and pulling on them and they will 100% rub through and be trashed.

VDesi07 · 12-06-2015, 05:03 PM

Quote:

Originally Posted by synolimit

I would. You have to remember the motor rocks a good bit. Every time you hit WOT and the motor rocks back and those tubes are being crushed in there, you're pushing and pulling on them and they will 100% rub through and be trashed.

Good point, will probably give that a look when I have a day off

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Test Car Wanted Moore Automotive Intake Cold Air Intake	Moore Auto	Moore Automotive	12	11-08-2013 12:07 PM
Test Car Wanted Moore Automotive Intake Cold AIr Intake	Moore Auto	Mid-Atlantic Region	3	11-08-2013 12:29 AM
I have K&N Cold Air Intake - Want to swap for Factory Intake	Troyz	Texas	2	03-27-2013 09:48 AM
New Cold Air Intake - On Its Way!	joshs09slvrZ	Intake/Exhaust	4	07-06-2011 06:22 PM

12-06-2015, 04:41 PM	#1 (permalink)
VDesi07 Base Member Join Date: Apr 2014 Location: Orlando Posts: 90 Drives: 14' White 370z Sport Rep Power: 13	At the moment the silicone tubes are bending a little through the holes. I am considering going back and cutting the holes to eliminate the bend.