Racelogic Traction Control System

Originally Posted by Mitco39

Its not hard at all, the trickiest spot is getting to the abs wires on the front tires (and even then if you pull the wheel liners its a cakewalk).

You do need to cut the signal wire going to each abs sensor and put a "chip" in between it to send a signal wire back to the main processing chip. You can buy a main harness to go in between your ecu and body harness so that you do not need to cut any other wires on the car (which I strongly recommend).

There will be no install DIY since to the best of my knowledge James and myself are the only ones with this actual system on our cars.