VQ37HR block limitations?

!xoible · 09-02-2009, 05:15 PM

Quote:

Originally Posted by KingDavid

The safe maximum is 550whp as per GTM and some vendors.

400hp N/A on a stock block seems very, very possible, lol. People are hitting 340-350whp with just I/H/E and a tune...CAn't wait for some more mods to come in and take it to that 400hp mark. ^_^

Quote:

Originally Posted by Orphan

I am quite impressed with the easy N/A performance out of them so far. Once a bit more time is spent on them I don't doubt 400whp N/A will be possible without going to extreme lengths.

Has anyone started working on the VVEL yet? Seems like once people can tune the VVEL there is an easy 5-10% more power on top of the basic mods.

i am very ignorant when it comes to tuning and so forth, but from a 330hp @ crank to 400 @ wheel without FI sounds like a joke to me. could you entertain me a bit and explain how anyone could reach 400 @ wheel without FI?

For the lack of better things to do I have been following M3's FI section on m3post.com. the engine puts over 350 hp at the wheel (414 at crank) and everyone finds it a stretch to even reach 400 hp without FI on that car...

edumacation, please!

KingDavid · 09-02-2009, 07:17 PM

Quote:

Originally Posted by !xoible

i am very ignorant when it comes to tuning and so forth, but from a 330hp @ crank to 400 @ wheel without FI sounds like a joke to me. could you entertain me a bit and explain how anyone could reach 400 @ wheel without FI?

For the lack of better things to do I have been following M3's FI section on m3post.com. the engine puts over 350 hp at the wheel (414 at crank) and everyone finds it a stretch to even reach 400 hp without FI on that car...

edumacation, please!

Well I cleared myself up earlier. I meant 400 to the crank, not to the wheel.

People are hitting 340-350 whp (if drivetrain loss is %15 it's about 391-403 to the crank) with just I/H/E and a tune. Stock intake manifold, stock throttle bodies, a few other stock things that MIGHT bump the power to 400 CRANK hp or get very close. At least I would think so.

It comes with 336 hp and the intakes and exhausts on the 370 are extremely restricted. This VQ is different from all of the other ones. It's bigger. Comes with a bottom end that, according to paper, lol, can handle 1000whp. Has a different type of valve control unlike what I've ever seen in a vehicle.

But here's the specifics on the motor and where that 1000whp claim came from. http://www.370 z.com/MagazineArticles/tabid/57/articleType/ArticleView/articleId/14/370Z-Engine-VQ37VHR.aspx (take out the space after "370")

!xoible · 09-02-2009, 09:21 PM

Quote:

Originally Posted by KingDavid

Well I cleared myself up earlier. I meant 400 to the crank, not to the wheel.

People are hitting 340-350 whp (if drivetrain loss is %15 it's about 391-403 to the crank) with just I/H/E and a tune. Stock intake manifold, stock throttle bodies, a few other stock things that MIGHT bump the power to 400 CRANK hp or get very close. At least I would think so.

It comes with 336 hp and the intakes and exhausts on the 370 are extremely restricted. This VQ is different from all of the other ones. It's bigger. Comes with a bottom end that, according to paper, lol, can handle 1000whp. Has a different type of valve control unlike what I've ever seen in a vehicle.

But here's the specifics on the motor and where that 1000whp claim came from. http://www.370 z.com/MagazineArticles/tabid/57/articleType/ArticleView/articleId/14/370Z-Engine-VQ37VHR.aspx (take out the space after "370")

sounds good! i think if it hits 300 rwhp i'd be happy

Hi-TecDesigns · 09-03-2009, 06:08 AM

Quote:

Originally Posted by !xoible

i think if it hits 300 rwhp i'd be happy

shooting for the stars, are we?

!xoible · 09-03-2009, 10:27 AM

Quote:

Originally Posted by Hi-TecDesigns

shooting for the stars, are we?

hahaha i dont even got a Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts	NonStopTuning	Engine & Drivetrain	1443	11-26-2014 08:30 PM
underbody/engine block rust prevention?	ADmaster71690	Exterior & Interior	13	08-31-2009 05:34 PM
Engine Block Oxidation	tooohip	Engine & Drivetrain	10	07-20-2009 08:15 AM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 12:25 PM
New kid on the block	VS-XX	Introduction	3	03-21-2009 01:49 AM