Blown Motor, Engine Rebuild/Replacement.

Nissan370

sorry to hear all the bad news
if i could do it all over again i would not have gotten in as deep as i did
i can say stillen supercharger then vsr turbo and built motor and all the little stuff in between is 25k easy

and atm 2 little sensors are still stopping me from hitting the 600+ mark
and i keep thinking price of the car + 25k in mods = used gtr lol

__________________
370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

Z&I

What are those 2 little atm sensors you mentioned ???
Thanks,

__________________
.
BB

MidnightBlueZ

UpRev GT MAFs

Z&I

Thanks for the clarification .......
I had those installed as well ... researching the GTM MAF's
Good ??? No Good ???

__________________
.
BB

jwick

The real question is would you actually receive them. If UpRev's work for your situation I recommend that route.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

Neo187H

Don't quote me on this but if memory serves I have read that the GTM MAFs ARE the UpRev MAFs with at most rebranding on them.

Personally I bought the GTM MAFs back a while back for my Stillen kit and they have worked well.

Z&I

GTM chimed in on this and said that their MAFS were made at the same factory as the UpRev's ...
GTM did say that their sensors were tunable with the UpRev software, but were made to their specifications and had more adjustment latitude in the midrange.
I'm hoping I've remembered that correctly ...
Will edit if I can find that post by GTM.

One of the other curveballs thrown at me after the fact was the K&N filters may have had an adverse affect on the MAF's.

Went to the K&N website and read their rebuttal ...
At this point I don't know ... but I won't be putting them back in just to be on the safe side...

Should be getting my motor back from Import Parts Pro in a few weeks ...
Then the fun begins again ......

__________________
.
BB

esfourteen

pretty sure he means the MAF sensors, depending on the piping sizes/location they can max out at different HP levels.

__________________
Build Thread | GTM TT Install Thread | Engine Build Thread

Z&I

Sort of thought that that was what he was referring to ... I've taken more notice and have gotten a bit more critical of information since my motor took an early retirement......

__________________
.
BB