Blown Motor, Engine Rebuild/Replacement.

COSMO · 03-31-2016, 11:03 AM

I've considered a ACT 6 puck..

COSMO · 03-31-2016, 02:08 PM

One things for sure I have never gotten so many home projects accomplished during this ordeal. The wife is happy...

bullitt5897 · 03-31-2016, 11:39 PM

Seriously if your going big power go os giken or have tilton make you a clutch.... I have had several tt Zs and Gs. The OS Gikens are the only ones able to hold the power... Double clutch if your under 800ft lbs and triple if your going over that. No need to go quad plate...

COSMO · 04-01-2016, 12:47 PM

Here is a pic of my new block about to be assembled ..

COSMO · 04-01-2016, 05:13 PM

Btw I have made my decision of the os giken twin clutch so thanks again for the feedback... I have upmost faith in bryan (BBR) will build my motor correctly this time around and I know it wont be 8 months until it is completed like the time before.. Will post up more pics as they come in..

roplusbee · 04-01-2016, 05:40 PM

My Competition Clutch (Twin Disk) is the organic disk material and rated at 750 lb/ft torque. Sad thing is that there were only a few units produced. Heck, mine doesn't even have part numbers on it...........

COSMO · 04-01-2016, 07:44 PM

Going to stick with os giken twin disk for now but thanks... Can't wait to get my baby back..

Streetz · 04-02-2016, 01:49 PM

I Have the southbend stage 4 extream and it's pretty good. Its been holding over 700ftlbs on my 350z for over 10k miles. Drives really nice also. I never looked to see if they offer a clutch for the 370z but I bet they do. The best part is the clutch is only 600$ flywheel was like 3-400.

Rid3_FaM0uS · 04-02-2016, 06:27 PM

Quote:

Originally Posted by COSMO

Just received this pm from one of the members and for the record I would never claim to have the biggest or baddest z on the planet. You guys can have it, lol

(There isn't any of these vendors that you deal with that I am not already friends with or know. So when you talk **** I hear about it. You are a little fish in a big *** pond... Ohhh and btw that little single isn't going to cut it... And your cheap *** k1 rods are just a step over eagle rods... Have fun with another blown motor trying to chase the big boys...)

I can honestly say I'm feeling the love so I must be doing something right... Have no intensions of chasing the Big Boys here btw.

I would loveeee to know the ignorant f@ck who sent you this pm Cosmo... I'm at 855whp on K1 rods and have had zero issues with them... Soon to be chasing more. Even after hydro locking the block twice due to blown head gaskets. Sounds to me like someone's a little @$$ chapped that they had to spend exuberant amounts on rods and Pistons for no reason.

P.S. I AM chasing the big boys, and if said individual wants to contest me about the quality of wiseco's products (or cosmos build for that matter)you can surely bring your "little fish" @$$ out and speak up!

COSMO · 04-02-2016, 08:13 PM

I agree with you on the ignorant f@ck but I really don't want this thread shut down due to some tool who has actually spent an exuberant of money for his alter ego.. Would love to see your build and specs though. The K1 rods are very good rods in my opinion too..

Elmo370z · 04-03-2016, 01:26 AM

**** cosmo i want to go for a ride

Rid3_FaM0uS · 04-04-2016, 01:13 PM

I totally agree Cosmo which it's cool I just don't understand how people can be so shallow minded. If there's anything I hate the most about the upper echelon of the Z community it's that it ALWAYS feels like a huge d!ck measuring contest. No one is genuinely proud for new competition.
It's all in my build journal buddy! I haven't updated in a longggg time because it felt like this forum was getting kinda dead, but I think I'll wrap up the thread as well as attaching dyno sheets/close out comments etc after the final tune to gas out this turbo kit the second week of June.

COSMO · 04-06-2016, 07:16 AM

Just wanted to post up some pics of my built motor from bobby. Upon delivery I had it shipped back. This kind of work is acceptable to him. I can't imagine what the bottom end looked like...

solidus · 04-06-2016, 07:43 AM

Quote:

Originally Posted by COSMO

Just wanted to post up some pics of my built motor from bobby. Upon delivery I had it shipped back. This kind of work is acceptable to him.

That's flat nasty. I wouldn't be sure about them touching anything if they didn't have enough pride to at least clean up the stuff you can see.

jwick · 04-06-2016, 10:48 AM

Quote:

Originally Posted by solidus

That's flat nasty. I wouldn't be sure about them touching anything if they didn't have enough pride to at least clean up the stuff you can see.

Bobby is worthless. I've said for years I'd just soon set fire to my car then let that ******* touch it.

03-31-2016, 11:39 PM	#1383 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Seriously if your going big power go os giken or have tilton make you a clutch.... I have had several tt Zs and Gs. The OS Gikens are the only ones able to hold the power... Double clutch if your under 800ft lbs and triple if your going over that. No need to go quad plate... __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-01-2016, 05:40 PM	#1386 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	My Competition Clutch (Twin Disk) is the organic disk material and rated at 750 lb/ft torque. Sad thing is that there were only a few units produced. Heck, mine doesn't even have part numbers on it........... __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

04-01-2016, 07:44 PM	#1387 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Going to stick with os giken twin disk for now but thanks... Can't wait to get my baby back.. zguynate and BBRSpeedWorks like this.

04-02-2016, 08:13 PM	#1390 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I agree with you on the ignorant f@ck but I really don't want this thread shut down due to some tool who has actually spent an exuberant of money for his alter ego.. Would love to see your build and specs though. The K1 rods are very good rods in my opinion too.. Rid3_FaM0uS and BBRSpeedWorks like this. Last edited by COSMO; 04-15-2016 at 10:57 AM.

04-04-2016, 01:13 PM	#1392 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 44	I totally agree Cosmo which it's cool I just don't understand how people can be so shallow minded. If there's anything I hate the most about the upper echelon of the Z community it's that it ALWAYS feels like a huge d!ck measuring contest. No one is genuinely proud for new competition. It's all in my build journal buddy! I haven't updated in a longggg time because it felt like this forum was getting kinda dead, but I think I'll wrap up the thread as well as attaching dyno sheets/close out comments etc after the final tune to gas out this turbo kit the second week of June. GaleForce, zguynate and COSMO like this. __________________ Always under construction. . .

03-31-2016, 11:03 AM	#1381 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I've considered a ACT 6 puck..

03-31-2016, 02:08 PM	#1382 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	One things for sure I have never gotten so many home projects accomplished during this ordeal. The wife is happy...

04-01-2016, 05:13 PM	#1385 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Btw I have made my decision of the os giken twin clutch so thanks again for the feedback... I have upmost faith in bryan (BBR) will build my motor correctly this time around and I know it wont be 8 months until it is completed like the time before.. Will post up more pics as they come in..

04-02-2016, 01:49 PM	#1388 (permalink)
Streetz Base Member Join Date: Aug 2015 Location: Chicago Posts: 59 Drives: 2011 370zTT 818whp Rep Power: 9	I Have the southbend stage 4 extream and it's pretty good. Its been holding over 700ftlbs on my 350z for over 10k miles. Drives really nice also. I never looked to see if they offer a clutch for the 370z but I bet they do. The best part is the clutch is only 600$ flywheel was like 3-400.

04-03-2016, 01:26 AM	#1391 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	**** cosmo i want to go for a ride

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 08:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 05:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-02-2012 11:29 PM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 11:28 AM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 10:01 AM