Blown Motor, Engine Rebuild/Replacement.

Ron · 03-11-2014, 02:48 PM

Similar thing happened to me. Talked to a guy who wouldn't give me his name. I asked for Sam and was told he was not there. Told the guy why I was calling (cracked manifolds) and he said he knew nothing about that. I asked if the new ones were going to be released and he said he will let someone else answer that question. I was forced to leave a message for Sam. Of course he never called back.

Dzel · 03-11-2014, 02:52 PM

edub370 · 03-11-2014, 02:57 PM

Quote:

Originally Posted by Chuck33079

I have a feeling they may be filing some flavor of bankruptcy eventually

is this just a guess, or what?

Chuck33079 · 03-11-2014, 02:58 PM

Quote:

Originally Posted by edub370

is this just a guess, or what?

Wild *** guess based on the way things are going and their liquidity issues.

blackonorange · 03-11-2014, 03:17 PM

yea, you could say the stars are aligning for a bankruptcy of some sort. mike leaving, people not getting their money, shady actions on the phone, lack of any action on the forum (besides george but where is he lately?). idk. people still in the group buy got more balls than i do especially since this type of thing has happened with other companies before.

Chuck33079 · 03-11-2014, 03:30 PM

Quote:

Originally Posted by blackonorange

yea, you could say the stars are aligning for a bankruptcy of some sort. mike leaving, people not getting their money, shady actions on the phone, lack of any action on the forum (besides george but where is he lately?). idk. people still in the group buy got more balls than i do especially since this type of thing has happened with other companies before.

Yep. Companies that make car parts go out of business all the time. Even well run ones.

1slow370 · 03-11-2014, 05:05 PM

Quote:

Originally Posted by Ron

Similar thing happened to me. Talked to a guy who wouldn't give me his name. I asked for Sam and was told he was not there. Told the guy why I was calling (cracked manifolds) and he said he knew nothing about that. I asked if the new ones were going to be released and he said he will let someone else answer that question. I was forced to leave a message for Sam. Of course he never called back.

I doubt its the same thing anyone remember this

Blown motor!!!!

They already said they wish to no longer wish do business with hairycosmogirl, lesson learned if you want service don't be an utter ***

DEpointfive0 · 03-11-2014, 05:29 PM

Quote:

Originally Posted by cosmogirl

Well you guys are going to love this. I just called gtm and told them who I was and the guy on the phone would not even tell me his name but instead try to find someone to help me. After a few minutes on hold the guy who answered the phone came back on and told me no one was there to help. Knowing he knew who I was and after explaining how my exhaust manifolds have cracked he told me he had to go because he could not spend anymore time on the phone. Again to any and all looking to purchase anything from company better be paying close attention to what things will be like after the transaction on done. I now have a TT kit in which I going to have to spend even more money to another company to hopefully fix.

Wellllll... Didn't they already say they will not do business with you again?

I don't mean to stir the pot, I hope you get sorted out using whatever means needed I guess.

I'm more just waiting for your bitchin build to be done

COSMO · 03-11-2014, 05:31 PM

It has nothing to do with being an utter @ss. The fact of the matter is gtm has screwed a lot of people and continues to do it without a care in the world their customers. But please continue your utter-bs line of crap like you always do.

Quote:

Originally Posted by 1slow370

I doubt its the same thing anyone remember this

Blown motor!!!!

They already said they wish to no longer wish do business with hairycosmogirl, lesson learned if you want service don't be an utter ***

O&G · 03-11-2014, 05:33 PM

There is a 350Z being shipped to JTran here in Houston that was sitting at GTM for 2 years. He was getting a stroked motor and various other things installed. After his dilemma with them he had the car shipped to another shop where they tried to start the car. When they started the car the crank hit the block, crank cradle.... If your building a motor and don't even take the time to freely rotate the assembly checking for clearance issues you probably shouldn't be building motors. His car continued to sit at the new shop with no progress so now JTran is going to help him get everything squared away, the way it should have been done the first time. I hear many stories like this everyday. Honest people getting screwed by shops not willing to take the time and do things right. It's more common than you would think.

I'm also familiar with Kyle at Import Parts Pro out of Houston and he does solid work, always satisfying his customers needs. I'm very familiar with the machine shop he uses and we use the same one when building our motors. They've been around for over 20 years.

Texas > everywhere else!

COSMO · 03-11-2014, 05:40 PM

At this point it's not a matter of doing business with me or anyone else for that matter but fixing my existing order since their product FAILED. I have a TT kit under a year old with hardly any miles with a Cracked Manifold. There are others here that also have cracked manifolds and surely more people that don't even know theirs have cracked... Let's face it people GTM has Failed us and will continue to take others money unless they know their business practices and poor workmanship.

Quote:

Originally Posted by DEpointfive0

Wellllll... Didn't they already say they will not do business with you again?

I don't mean to stir the pot, I hope you get sorted out using whatever means needed I guess.

I'm more just waiting for your bitchin build to be done

elperuano · 03-11-2014, 05:48 PM

Quote:

Originally Posted by 1slow370

I doubt its the same thing anyone remember this

Blown motor!!!!

They already said they wish to no longer wish do business with hairycosmogirl, lesson learned if you want service don't be an utter ***

Quote:

Originally Posted by O&G

There is a 350Z being shipped to JTran here in Houston that was sitting at GTM for 2 years. He was getting a stroked motor and various other things installed. After his dilemma with them he had the car shipped to another shop where they tried to start the car. When they started the car the crank hit the block, crank cradle.... If your building a motor and don't even take the time to freely rotate the assembly checking for clearance issues you probably shouldn't be building motors. His car continued to sit at the new shop with no progress so now JTran is going to help him get everything squared away, the way it should have been done the first time. I hear many stories like this everyday. Honest people getting screwed by shops not willing to take the time and do things right. It's more common than you would think.

I'm also familiar with Kyle at Import Parts Pro out of Houston and he does solid work, always satisfying his customers needs. I'm very familiar with the machine shop he uses and we use the same one when building our motors. They've been around for over 20 years.

Texas > everywhere else!

Yeeeaaaaaa. U were saying?

blackonorange · 03-11-2014, 05:53 PM

Quote:

Originally Posted by 1slow370

I doubt its the same thing anyone remember this

Blown motor!!!!

They already said they wish to no longer wish do business with hairycosmogirl, lesson learned if you want service don't be an utter ***

ha i forgot about that... obviously that point is moot now... it seems like they dont wanna do business with anyone... at all... ever again.

COSMO · 03-11-2014, 06:01 PM

There's more than one way to skin a cat. For some reason I wouldn't be surprised if they have been sued before.. The sad thing here is why not just do the right thing and make things right with their customers past and present? The answer to that question is They Just Don't Care!!!

fuct · 03-12-2014, 08:31 AM

or they are so back logged with thing to do and are spreading themselves so thin customers are falling thru the cracks....

03-11-2014, 02:48 PM	#511 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	Similar thing happened to me. Talked to a guy who wouldn't give me his name. I asked for Sam and was told he was not there. Told the guy why I was calling (cracked manifolds) and he said he knew nothing about that. I asked if the new ones were going to be released and he said he will let someone else answer that question. I was forced to leave a message for Sam. Of course he never called back. G37sHKS, elperuano and COSMO like this. __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ] Last edited by Ron; 03-11-2014 at 02:50 PM.

03-11-2014, 02:52 PM	#512 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	__________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

03-11-2014, 03:17 PM	#515 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	yea, you could say the stars are aligning for a bankruptcy of some sort. mike leaving, people not getting their money, shady actions on the phone, lack of any action on the forum (besides george but where is he lately?). idk. people still in the group buy got more balls than i do especially since this type of thing has happened with other companies before. Dzel, elperuano, Chuck33079 and 1 others like this.

03-11-2014, 05:33 PM	#520 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	There is a 350Z being shipped to JTran here in Houston that was sitting at GTM for 2 years. He was getting a stroked motor and various other things installed. After his dilemma with them he had the car shipped to another shop where they tried to start the car. When they started the car the crank hit the block, crank cradle.... If your building a motor and don't even take the time to freely rotate the assembly checking for clearance issues you probably shouldn't be building motors. His car continued to sit at the new shop with no progress so now JTran is going to help him get everything squared away, the way it should have been done the first time. I hear many stories like this everyday. Honest people getting screwed by shops not willing to take the time and do things right. It's more common than you would think. I'm also familiar with Kyle at Import Parts Pro out of Houston and he does solid work, always satisfying his customers needs. I'm very familiar with the machine shop he uses and we use the same one when building our motors. They've been around for over 20 years. Texas > everywhere else! fuct, G37sHKS, Dzel and 2 others like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal Last edited by O&G; 03-11-2014 at 05:36 PM.

03-12-2014, 08:31 AM	#525 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 23	or they are so back logged with thing to do and are spreading themselves so thin customers are falling thru the cracks.... COSMO likes this.

03-11-2014, 06:01 PM	#524 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	There's more than one way to skin a cat. For some reason I wouldn't be surprised if they have been sued before.. The sad thing here is why not just do the right thing and make things right with their customers past and present? The answer to that question is They Just Don't Care!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 08:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 05:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-02-2012 11:29 PM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 11:28 AM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 10:01 AM