my first step -_-

Nissan370 · 09-10-2013, 10:41 AM

Ok this is what I was going to do with my Stillen kit before I sold it

850cc injectors
340lph fuel pump

Redo the pipping and make it a front mount inter cooler kit

Put the maf's near the throttle body (behind the blower) were they should be

Upgrade the impeller and go with a cog setup

Maybe even go as far as returning to the stock intake manifold

Look at the 350z and g35 guys with the vortech kits they make good power

theDreamer · 09-10-2013, 10:44 AM

Quote:

Originally Posted by elia_ebyss

Im going with ur advise .. thanks alot bro .. but how many whp in gtm sc stage 1

Stage 1 will top out around the mid 400s without getting into a bunch of other upgrades. I am sitting just above 400 with a GTM stage 1 SC and getting a retune this Friday to hash out a few minor issues, will report back on new numbers.

theDreamer · 09-10-2013, 10:45 AM

But on that note, here is the finished builds that have been reported on the forum or directly to me. I would take this as about maybe 10-20% of the total builds in the world at most.

Forced Induction Finished Builds

Chuck33079 · 09-10-2013, 10:46 AM

Quote:

Originally Posted by theDreamer

Stage 1 will top out around the mid 400s without getting into a bunch of other upgrades. I am sitting just above 400 with a GTM stage 1 SC and getting a retune this Friday to hash out a few minor issues, will report back on new numbers.

Who's tuning it? I need to do the same. Paul recommended Kosmic to me, but I'm open to suggestions. Sorry to hijack the thread

elia_ebyss · 09-10-2013, 10:49 AM

Quote:

Originally Posted by tibal

I think that there are people out there who have made 500rwhp with that kit. Hidden in the woodwork though.

I know with upgraded impeller. Some big injectors, and like Chuck said, a really aggressive/ supporting tune, it can be done but... the Stage 1.5 from GTM may be a better option.. or the new Twin SC setup.

I will go with chuck and I will sell my fi and buy gtm sc beacuse if I reach 500 whp then maybe I asked for more loool

theDreamer · 09-10-2013, 10:49 AM

Quote:

Originally Posted by Chuck33079

Who's tuning it? I need to do the same. Paul recommended Kosmic to me, but I'm open to suggestions. Sorry to hijack the thread

I am going to Kozmzic, was a 1 month wait, they are backed up right now.
There is another 370z being finished up there (370z 7AT with GTM stage 1 TT) which will get tuned here in a week or so. They are waiting on some new piping from GTM to finish the install.

Also having a set of TP put on, use to run LTH but got tired of the drone on a DD but have been blowing up stock cats and figure it is time to just put TP for now. Don't want the cats to blow and suck back into the engine block.

elperuano · 09-10-2013, 10:49 AM

Quote:

Originally Posted by theDreamer

Swiss370 has probably one of the better Stillen SC setups and has upgraded a lot: First STILLEN Supercharger 370Z swiss

There have been some who have gone with the Stillen SC with the goal of 500whp and all have sold their kit and moved onto another option. If you want to stay SC then GTM is your only option but if you want to migrate to TT then you have GTM, Fast Intentions, and Greddy.

Thisssssss is the end result of almost every stillen kit owner.

Chuck33079 · 09-10-2013, 10:50 AM

Cool. I was waiting for it to get a little cooler before I took it to them anyway, so that works. Hijack over.

6MT · 09-10-2013, 10:53 AM

Quote:

Originally Posted by Chuck33079

If the Stillen kit is part of that $10k your budget is too low. Otherwise, nobody can tell you since nobody has ever made 500whp on the Stillen kit. My guess would be upgrading all the pullies, new fuel system, meth and a really aggressive tune.

Melt-down imminent...

elia_ebyss · 09-10-2013, 10:55 AM

Quote:

Originally Posted by Chuck33079

Most people seem to go with the Stage 1.5 or 2 if they're looking for the kind of power you want. Give Sam at GTM a call and he'll talk you through all of the differences and what would be best for you.

.. I prefer to emailing him beacuse I live in the middle east

Chuck33079 · 09-10-2013, 10:55 AM

Quote:

Originally Posted by 6MT

Melt-down imminent...

I didn't say it would be reliable

Chuck33079 · 09-10-2013, 10:56 AM

Quote:

Originally Posted by elia_ebyss

.. I prefer to emailing him beacuse I live in the middle east

Then you may have to wait. Email is iffy with GTM. They've answered the phone every time I've called, but email may take a long time. If I were you, I'd just stay up late/get up early and give them a call.

elia_ebyss · 09-10-2013, 11:00 AM

Quote:

Originally Posted by theDreamer

But on that note, here is the finished builds that have been reported on the forum or directly to me. I would take this as about maybe 10-20% of the total builds in the world at most.

Forced Induction Finished Builds

Only one car with stillen sc reach a 500 whp .. ur thread help me to be sure to sell my kit and going with gtm sc

elperuano · 09-10-2013, 11:04 AM

Swiss370 also has 98 octane rating and some Vortech parts.

elia_ebyss · 09-10-2013, 11:07 AM

Quote:

Originally Posted by Chuck33079

Then you may have to wait. Email is iffy with GTM. They've answered the phone every time I've called, but email may take a long time. If I were you, I'd just stay up late/get up early and give them a call.

I will call him after selling my kit . . or maybe getting aboard to amrica and speak with him personally

09-10-2013, 10:41 AM	#16 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	Ok this is what I was going to do with my Stillen kit before I sold it 850cc injectors 340lph fuel pump Redo the pipping and make it a front mount inter cooler kit Put the maf's near the throttle body (behind the blower) were they should be Upgrade the impeller and go with a cog setup Maybe even go as far as returning to the stock intake manifold Look at the 350z and g35 guys with the vortech kits they make good power __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

09-10-2013, 10:45 AM	#18 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	But on that note, here is the finished builds that have been reported on the forum or directly to me. I would take this as about maybe 10-20% of the total builds in the world at most. Forced Induction Finished Builds elia_ebyss likes this. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

09-10-2013, 10:50 AM	#23 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Cool. I was waiting for it to get a little cooler before I took it to them anyway, so that works. Hijack over. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WOT box 2-step	NIZZING	Forced Induction	14	02-14-2013 10:32 PM
Red GT-R Push Start Button Installation Step by Step~~~Super easy!	cycy89	DIY Section (Do-It-Yourself)	25	03-31-2012 10:52 PM
Looking to step up from the Yaris	Kiteless	New Forum Member	0	02-06-2012 07:35 PM
F1 at my door step	2011 Nismo#91	The Lounge (Off Topic)	14	10-27-2011 11:01 AM

09-10-2013, 11:04 AM	#29 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	Swiss370 also has 98 octane rating and some Vortech parts.