Another BORING Nitrous build starts

Originally Posted by chrischhorn

Changed my mind today on how I'm going to mount the solenoids. Was originally going to mount them on the front of the block like NeverBoneStck did with his setup but now I'm moving them to the back to near the firewall. I'm going to have to order some new fuel and nitrous lines to go from the solenoids as the ones that came with it are 2ft each but I need 1 1ft fuel line, 1 1ft nitrous line, 1 3 ft fuel line, and 1 3ft nitrous line in order to run the way I have the solenoids set now. I originally had the lines crossing the front of the block under the valve cover with the original mounting points but now the lines will be running behind the intake manifold so they will not be as noticeable.
Friday, I will be receiving everything I need in order to do my battery relocation to the trunk also. Using an Odyssey PC680 battery. Once again location of the bottle may change too. I'd like to be able to tuck it behind the rear bar in the trunk where the styrofoam pad is but not sure if it will fit. Just a little bit more stealthy and I can keep all my trunk space. If that doesn't work out then I will just rework the current mount to fit a little better and continue as is. Sunday is when all the major wiring begins!