Stillen Supercharger estimates???

1slow370 · 01-02-2010, 05:09 PM

I dunno i'm pretty confused on this whole thing. since they didn't release the trim they may be using a Vortech VTS unit especially considering the new manifold, water to air intercooler, lack of photos and general reluctance to leak info. If it is it all makes sense because in their shoes considering the amount of negative backlash against the 350z roots kit, i would wait until all the power figures where in before posting up the final decision. my guess is the move to set the release date back into march is just in case the vts doesn't pan out and a new kit designed around the centrifugal has to be made.

the main points for this argument are the new manifold especially considering GTM pulled it off easily with the stock one. As for the hood concerns, the 350z kit was made utilizing the stock lower intake manifold so the height was increased. if they remade that piece to make the unit sit lower it could be possible to make it all fit. besides using a positive displacement blower and making it all work would allow stillen to save face on the shortcomings of the 350z unit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 370Z 1/4 mile Times thread (Stock, TT, Nitrous, Supercharger, Bolt ons etc)	AK370Z	Track / Autocross / Drifting / Dragstrip	618	08-16-2019 12:56 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 02:21 AM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 10:01 PM

01-02-2010, 05:09 PM	#11 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7252	I dunno i'm pretty confused on this whole thing. since they didn't release the trim they may be using a Vortech VTS unit especially considering the new manifold, water to air intercooler, lack of photos and general reluctance to leak info. If it is it all makes sense because in their shoes considering the amount of negative backlash against the 350z roots kit, i would wait until all the power figures where in before posting up the final decision. my guess is the move to set the release date back into march is just in case the vts doesn't pan out and a new kit designed around the centrifugal has to be made. the main points for this argument are the new manifold especially considering GTM pulled it off easily with the stock one. As for the hood concerns, the 350z kit was made utilizing the stock lower intake manifold so the height was increased. if they remade that piece to make the unit sit lower it could be possible to make it all fit. besides using a positive displacement blower and making it all work would allow stillen to save face on the shortcomings of the 350z unit.