Nissan 370Z Forum  

*****Fast Intentions "Twin Turbo Kit" is here*****

Originally Posted by faceglide It it is not being used for power, then it really does not solve any existing problem(not that I would use it for power). You get

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree7059Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 04-28-2014, 08:45 AM   #1 (permalink)
Base Member
 
Join Date: Mar 2011
Location: NC
Posts: 16
Drives: 6MT TT, 700+whp E85
Rep Power: 16
rcdash is on a distinguished road
Default

Quote:
Originally Posted by faceglide View Post
It it is not being used for power, then it really does not solve any existing problem(not that I would use it for power).

You get safety from a a great tune, great install and quality parts/supporting mods. The kit is proven to run about 500hp on 91 and more on 93. We all chose safe, responsible tunes, tunes that will never warrant the need for additional safety measure.

There is nothing wrong with it(meth), but I personally would sell it and invest in a return style fuel system, radiator and oil cooler and call that my safety net. Which is what I did...not one hitch yet, running stronger than the day I got it. I wouldn't bother adding anything else to bump the power before addressing that "trifecta".
+1. I implemented an aquamist HFS-6 system with dual pre-TB nozzles and even tried small pre-turbo nozzles as well. Just not worth it. I had all the safeties with a flow switch that would cut boost if low flow etc but it was just a headache to keep troubleshooting. When I took off my methanol injection set up - all my "stainless" hose fittings were beginning to show signs of rust.

A safe tune is the way to go and e85 rocks. Too bad there is no PNP Haltech unit for the 370z yet. Being able to mix any qty of E85 and 93 oct is so nice. For the adventuresome, Hal at Dynosty can probably make a custom harness.
rcdash is offline   Reply With Quote
Old 04-28-2014, 09:52 AM   #2 (permalink)
A True Z Fanatic
 
Mr.Squeeze's Avatar
 
Join Date: Aug 2010
Location: Keystone state
Posts: 1,209
Drives: 2010 370z
Rep Power: 20154
Mr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond repute
Default

Quote:
Originally Posted by rcdash View Post
+1. I implemented an aquamist HFS-6 system with dual pre-TB nozzles and even tried small pre-turbo nozzles as well. Just not worth it. I had all the safeties with a flow switch that would cut boost if low flow etc but it was just a headache to keep troubleshooting. When I took off my methanol injection set up - all my "stainless" hose fittings were beginning to show signs of rust.

A safe tune is the way to go and e85 rocks. Too bad there is no PNP Haltech unit for the 370z yet. Being able to mix any qty of E85 and 93 oct is so nice. For the adventuresome, Hal at Dynosty can probably make a custom harness.

About a year and a half ago I was in Florida at the Performance Racing Industry show and saw a Haltech that was suppose to come out. At the time I spoke with the Rep and even had my business information taken. I would have ran the unit on my car but like everything else with this platform development is slow.

I took these pictures December 1 2012 and was looking forward using this my car.



__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ
Mr.Squeeze is offline   Reply With Quote
Old 04-28-2014, 05:45 PM   #3 (permalink)
A True Z Fanatic
 
esfourteen's Avatar
 
Join Date: Mar 2010
Location: LI, NY
Posts: 1,375
Drives: 40th TT
Rep Power: 20
esfourteen has much to be proud ofesfourteen has much to be proud ofesfourteen has much to be proud ofesfourteen has much to be proud ofesfourteen has much to be proud ofesfourteen has much to be proud ofesfourteen has much to be proud ofesfourteen has much to be proud ofesfourteen has much to be proud of
Send a message via AIM to esfourteen
Default

Quote:
Originally Posted by Mr.Squeeze View Post
About a year and a half ago I was in Florida at the Performance Racing Industry show and saw a Haltech that was suppose to come out. At the time I spoke with the Rep and even had my business information taken. I would have ran the unit on my car but like everything else with this platform development is slow.
haltech isn't making a plug n play ecu for our cars, but their new ECU (elite) will support the 370z. that should be out in 1-2 months from what they said
esfourteen is offline   Reply With Quote
Old 04-28-2014, 05:59 PM   #4 (permalink)
A True Z Fanatic
 
Mr.Squeeze's Avatar
 
Join Date: Aug 2010
Location: Keystone state
Posts: 1,209
Drives: 2010 370z
Rep Power: 20154
Mr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond reputeMr.Squeeze has a reputation beyond repute
Default

Quote:
Originally Posted by esfourteen View Post
haltech isn't making a plug n play ecu for our cars, but their new ECU (elite) will support the 370z. that should be out in 1-2 months from what they said

I know there not making a plug and play for our cars if they haven't come out with what I saw at the PRI show almost 2 years ago. Now this Elite ECU I wont
believe them tell I see it.
__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ
Mr.Squeeze is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here! F.I. Inc. Intake/Exhaust 91 02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release F.I. Inc. Drivetrain/Engine 95 11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation Mike@GTM Forced Induction 115 08-14-2014 09:04 PM
Twin scroll vs twin turbo SS_Firehawk Forced Induction 32 04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit Nismo221 Forced Induction 57 08-16-2011 04:44 PM


All times are GMT -5. The time now is 07:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2