Fast Intentions "Twin Turbo Kit" is here

F.I. Inc. · 06-12-2013, 09:11 AM

Quote:

Originally Posted by DPE G

Tony, to correct you the G37...mine...peaks @ 10psi, lets not tell stories now...

Ha ha, sorry for the mix up. I was told 12 psi from a few people at the airstrip. You would know best though after all it is your car! Regardless, your car look sand ran great. Best part is that sick exhaust system you have...

Thanks, Tony

F.I. Inc. · 06-12-2013, 09:12 AM

Quote:

Originally Posted by m3chhawk

Wasn't the F.I. car set at 7.5 psi???

That is correct.

DPE G · 06-12-2013, 12:24 PM

Quote:

Originally Posted by F.I. Inc.

Ha ha, sorry for the mix up. I was told 12 psi from a few people at the airstrip. You would know best though after all it is your car! Regardless, your car look sand ran great. Best part is that sick exhaust system you have...

Thanks, Tony

Yea yea, he said she said I'm sure, which is funny because I spoke to nobody at the track...damn rumor mill.

theaudir8fan · 06-13-2013, 03:04 AM

in all fairness, a Z is a lot lighter than a G which is probably where a lot of the difference is made, still great cars

SgtGoldy · 06-13-2013, 03:28 AM

So back onto test fitting your turbo onto my G for R&D and then giving me the system. When should I drop it off? Im free tomorrow Tony. Hell I have coils coming in the mail soon, I'll even let you put those on too cause Im such a nice guy.

DEpointfive0 · 06-13-2013, 05:16 AM

Quote:

Originally Posted by SgtGoldy

So back onto test fitting your turbo onto my G for R&D and then giving me the system. When should I drop it off? Im free tomorrow Tony. Hell I have coils coming in the mail soon, I'll even let you put those on too cause Im such a nice guy.

F.I. Inc. · 06-26-2013, 02:04 AM

Update,

We are at what we call "The Limbo Stage." This is the time in between the initial testing and the production kits being installed and/or shipped. Alot of downtime here on the forum and all seems calm. I can assure you we are working away getting everything perfect for our customers.

Many key components for our TT Kit are complete, in the shop and ready for installation and shipment. Other components are currently in production.

We have decided to raise the bar even higher than the prototype. (No the price is not going up.) The oil relocation adapter plate along with oil line fitting plate on the side of the engine block were off the shelf Moroso parts used for the prototype. Some of the other oil/water fittings were custom fabricated as one off pieces by us in house for the prototype. These were all phenomenal parts however they are not time or cost effective for production.

So in 3D CAD Solidworks we have designed our own application specific parts for the 370Z. This is the same process as how our exhaust manifolds were designed. Manufactured on a CNC Mill all of the following parts are comprised of "Billet Aluminum."

-Oil line adapter (side block mounted)
-Oil filter relocation adapter
-Coolant fittings
-Turbocharger oil drain fittings (O Ring) to eliminate the gasket.

In addition all of our silicone couplers are 4 ply black/black custom with our new logo stamped on them. All intercoolers will be pressure tested in the fabrication process. This will ensure a consistent quality product either installed or shipped. All of our turbochargers weather it be the Garrett GT28RS or GTX-2867R will be clocked and locked down to their installed rotation prior to boxing and shipment. This will ensure the installer has to spend less time figuring things out during the installation. We are taking everything into account to ensure the installer has the smoothest install possible.

The production exhaust manifold process is coming along quite nice. We have enlisted the services of a local machinist with over 35 years experience in his field. He told us the design we brought him is the most elaborate and complex exhaust manifold he as ever seen. Needless to say we brought him a challenge. Nothing is impossible if you enlist the right people. The tooling for the exhaust manifolds is nearly complete. We are also working with a local foundry state side to cast the exhaust manifolds. I am very proud to say we are manufacturing all of our custom parts here is the USA! Aside of the obvious right reason to do that, manufacturing our turbo parts locally is the only way to ensure the highest and consistent quality. Sure it comes at a price, but why settle for less!

Over the next 5 weeks we plan to do the first 2-3 installations in house. During that time we will write the installation manual step by step for our TT Kit. From that point forward we should be ready to start shipping out orders. Currently there are 11 kits pre ordered. We are producing all of the components for the first 25 kits. For once Fast Intentions may actually have something in stock. Once we have 18 kits sold we will start producing parts for the next 25 kits. This gives us a cushion of 7 kits to work with in stock. Our goal is to have it on the shelf ready for you when the order is placed.

To close,
We currently are working with 3 shops to be recognized as our "Certified Installers." What this means is either myself or Dan will fly out to their location and personally train their technicians on the first install. In addition their will be special tooling created by us to minimize the installation time. All certified installers will have these tools. We hope this is a big selling point for the potential buyer knowing they will have their kit installed by a properly trained technician at a fair price. We want to have 7-10 certified shops in strategic places throughout the country. This way every customer is in reasonable driving distance from a certified installer. The shops so far are,

SpecialtyZ (Chatsworth, Ca)
Grubbs Nissan/Screaming Lizard Customs (Dallas/Fort Worth, Tx)
Forged Performance (Atlanta, Ga)

More updates will follow with pictures of the newly custom designed parts along with the production manifolds. Please stay tuned as the limbo stage will be ending soon. If anyone has any questions at all or would like to place an order please do not hesitate to call me directly.

Thank you all for your time.

Tony

DEpointfive0 · 06-26-2013, 02:27 AM

At least Cy and Tyler won't have to drive out to CA now

May I recommend Baker Tuning/Baker North in Houston? They're REALLY well known

F.I. Inc. · 06-26-2013, 02:39 AM

Quote:

Originally Posted by DEpointfive0

At least Cy and Tyler won't have to drive out to CA now

May I recommend Baker Tuning/Baker North in Houston? They're REALLY well known

As far as I know we are still doing the install for Cy and Tyler.

I have briefly dealt with the guys from Baker Tuning in the past. All good experiences. It would be a consideration if they reached out to us.

Thanks, Tony

GaleForce · 06-26-2013, 06:44 AM

Excellent update. Kudos on keeping things State side

sfearl1 · 06-26-2013, 07:55 AM

Considering shops in the midwest? AMS comes to mind.

F.I. Inc. · 06-26-2013, 08:42 AM

Quote:

Originally Posted by GaleForce

Excellent update. Kudos on keeping things State side

Thank you!

F.I. Inc. · 06-26-2013, 08:44 AM

Quote:

Originally Posted by sfearl1

Considering shops in the midwest? AMS comes to mind.

If they reached out to us it would be a consideration. We would love to work with them. What they have done with the GTR is nothing short of impressive!

Mr.Squeeze · 06-26-2013, 11:39 AM

Very nice update Tony keep up the great work

Sh0velMan · 06-26-2013, 11:40 AM

Quote:

Originally Posted by Mr.Squeeze

Very nice update Tony keep up the great work ?

I'm Ron Burgundy?

06-13-2013, 03:04 AM	#1114 (permalink)
theaudir8fan Base Member Join Date: Jul 2011 Location: lonely land up north Posts: 162 Drives: 07 Infiniti G35S PG Rep Power: 13	in all fairness, a Z is a lot lighter than a G which is probably where a lot of the difference is made, still great cars __________________ 2007 Infiniti G35S 5AT PG; GTM; KW; Hotchkis; Stillen; Berks; SPC; GT-spec; SxExCx

06-13-2013, 03:28 AM	#1115 (permalink)
SgtGoldy A True Z Fanatic Join Date: Feb 2009 Location: Orange County, CA Posts: 3,503 Drives: C63 AMG - LSD Rep Power: 650	So back onto test fitting your turbo onto my G for R&D and then giving me the system. When should I drop it off? Im free tomorrow Tony. Hell I have coils coming in the mail soon, I'll even let you put those on too cause Im such a nice guy. F.I. Inc., Mr.Squeeze and DEpointfive0 like this. __________________ C63 AMG LSD - Straight Pipe - EuroCharge v5 - Vossen CV7 - IG: @SuperFastYo

06-26-2013, 02:04 AM	#1117 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	Update, We are at what we call "The Limbo Stage." This is the time in between the initial testing and the production kits being installed and/or shipped. Alot of downtime here on the forum and all seems calm. I can assure you we are working away getting everything perfect for our customers. Many key components for our TT Kit are complete, in the shop and ready for installation and shipment. Other components are currently in production. We have decided to raise the bar even higher than the prototype. (No the price is not going up.) The oil relocation adapter plate along with oil line fitting plate on the side of the engine block were off the shelf Moroso parts used for the prototype. Some of the other oil/water fittings were custom fabricated as one off pieces by us in house for the prototype. These were all phenomenal parts however they are not time or cost effective for production. So in 3D CAD Solidworks we have designed our own application specific parts for the 370Z. This is the same process as how our exhaust manifolds were designed. Manufactured on a CNC Mill all of the following parts are comprised of "Billet Aluminum." -Oil line adapter (side block mounted) -Oil filter relocation adapter -Coolant fittings -Turbocharger oil drain fittings (O Ring) to eliminate the gasket. In addition all of our silicone couplers are 4 ply black/black custom with our new logo stamped on them. All intercoolers will be pressure tested in the fabrication process. This will ensure a consistent quality product either installed or shipped. All of our turbochargers weather it be the Garrett GT28RS or GTX-2867R will be clocked and locked down to their installed rotation prior to boxing and shipment. This will ensure the installer has to spend less time figuring things out during the installation. We are taking everything into account to ensure the installer has the smoothest install possible. The production exhaust manifold process is coming along quite nice. We have enlisted the services of a local machinist with over 35 years experience in his field. He told us the design we brought him is the most elaborate and complex exhaust manifold he as ever seen. Needless to say we brought him a challenge. Nothing is impossible if you enlist the right people. The tooling for the exhaust manifolds is nearly complete. We are also working with a local foundry state side to cast the exhaust manifolds. I am very proud to say we are manufacturing all of our custom parts here is the USA! Aside of the obvious right reason to do that, manufacturing our turbo parts locally is the only way to ensure the highest and consistent quality. Sure it comes at a price, but why settle for less! Over the next 5 weeks we plan to do the first 2-3 installations in house. During that time we will write the installation manual step by step for our TT Kit. From that point forward we should be ready to start shipping out orders. Currently there are 11 kits pre ordered. We are producing all of the components for the first 25 kits. For once Fast Intentions may actually have something in stock. Once we have 18 kits sold we will start producing parts for the next 25 kits. This gives us a cushion of 7 kits to work with in stock. Our goal is to have it on the shelf ready for you when the order is placed. To close, We currently are working with 3 shops to be recognized as our "Certified Installers." What this means is either myself or Dan will fly out to their location and personally train their technicians on the first install. In addition their will be special tooling created by us to minimize the installation time. All certified installers will have these tools. We hope this is a big selling point for the potential buyer knowing they will have their kit installed by a properly trained technician at a fair price. We want to have 7-10 certified shops in strategic places throughout the country. This way every customer is in reasonable driving distance from a certified installer. The shops so far are, SpecialtyZ (Chatsworth, Ca) Grubbs Nissan/Screaming Lizard Customs (Dallas/Fort Worth, Tx) Forged Performance (Atlanta, Ga) More updates will follow with pictures of the newly custom designed parts along with the production manifolds. Please stay tuned as the limbo stage will be ending soon. If anyone has any questions at all or would like to place an order please do not hesitate to call me directly. Thank you all for your time. Tony Dembflyr, dirTy_shoeZ, Mr.Squeeze and 10 others like this. __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

06-26-2013, 02:27 AM	#1118 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	At least Cy and Tyler won't have to drive out to CA now May I recommend Baker Tuning/Baker North in Houston? They're REALLY well known __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language: Last edited by DEpointfive0; 06-26-2013 at 02:31 AM.

06-26-2013, 06:44 AM	#1120 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Excellent update. Kudos on keeping things State side __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

06-26-2013, 07:55 AM	#1121 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 17	Considering shops in the midwest? AMS comes to mind. __________________ Scott

06-26-2013, 11:39 AM	#1124 (permalink)
Mr.Squeeze A True Z Fanatic Join Date: Aug 2010 Location: Keystone state Posts: 1,209 Drives: 2010 370z Rep Power: 20152	Very nice update Tony keep up the great work F.I. Inc. likes this. __________________ Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ Last edited by Mr.Squeeze; 06-26-2013 at 11:51 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here