09-07-2012, 01:28 PM
|
#10 (permalink)
|
|
A True Z Fanatic
Join Date: Aug 2010
Location: Keystone state
Posts: 1,209
Drives: 2010 370z
Rep Power: 20154
|
Quote:
Originally Posted by Nissan370
does anyone know the size of the stock pulley or the 9lb pulley we can get with the kit i was going to get the smallest pulley i can to see what the boost and slippage looked like
before going with the cog set-up i mean if slippage is minimal i may not need to change over to the cog set-up but i do want atleast 14-15psi up top
|
The stock Stillen pulley is 3.12 the smaller pulley 9 pound you have is 2.75 that's pretty small. That's the reason I did the cog pulleys when I had the kit better grip plus boost comes on sooner ,even better than the 9 pound pulley . Since you have the T trim you would need to switch in order to take advantage if the blower it self . The thing that concerns me with doing this is all the other mods you have to do to the kit I it runs hot . This is the reason I sold mine with my built motor .
__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ
|
|
|
Similar Threads
11Likes
Threaded Mode
