First STILLEN Supercharger 370Z swiss

TopgunZ · 04-16-2016, 10:17 PM

I'm not sure where you were going with the psi gain from changing the bypass. That won't do anything to help power unless your old one was breaking open.

The bigger valve will definitely make it louder.

swiss370Z · 04-17-2016, 02:04 AM

Quote:

Originally Posted by TopgunZ

I'm not sure where you were going with the psi gain from changing the bypass. That won't do anything to help power unless your old one was breaking open.

The bigger valve will definitely make it louder.

We have found in the last 4 months, that the compressor and the throttle is heavily loaded.
The problem is that at high engine speeds and throttle closed, much air needs to be transported away! Over the Bypass.
The "25mm" Turbosmart BOV comes here to its limits.

With the Stroker- kit (4:07 liters) and the compression ratio of 10.5 : 1,
needs the engine more air than before.

Using the same compressor setup I had before the engine conversion 10 - 11 psi Boost.
Now only max 9 Psi! The amount of air from the Vortech is the same.

With the new conversion I want to achieve about 12 psi boost.

The following parts and adjustments are made in the next 2 weeks:

- All bearings and seals in the Vortech V-3 Sci be changed
- New Vortech Pulleys (High Traction)
- New flat belt (compressor and engine)
- Converted to Speed Density
- EcuTek optimization
- Full Service (oils etc.)

With the Speed Density conversion I can intercooling evaluate after the plenum cooler and set the new water pump on the best regulation.

I will report as soon as the "Z" is with me ...

(Hope you understand my bad english

)

Rusty · 04-17-2016, 05:06 PM

You have better English then most do here.

bewhitey · 04-18-2016, 11:13 PM

Hey there, I just bought a Stillen supercharged 40th anniversary Z about 5 months ago.... haven't been doing anything close to the awesome stuff you have done to your car, only silly things like short shifters and led lights.... I did get it uprev tuned for altitude, hopped up to 410whp at the last second on a dynojet. Just wanted to say thanks for the great thread you have kept going.

Next on my list is an oil cooler after having read through all these pages, either that or selling it because I'm afraid I am going to blow the motor! What do you think caused your piston burn up craziness??? Low oil pressure from adding an oil cooler... son of a!

I am thinking of going with a Z1 motorsports 34 row kit

https://www.z1motorsports.com/z1-pro...it-p-4135.html

any thoughts or suggestions?

swiss370Z · 04-21-2016, 12:35 PM

Hey Guys

A dream come true for me!

Last year I had to cancel at short notice ..
(The Problem with the 370Z Engine.....

)

But this year it is 100% work!

At the start in SCC500, Rolling50

From 50 km / h speed start ..... and then one kilometer full throttle ....

I can now no longer be asleep

https://www.youtube.com/watch?v=dC3fjcRdTuI

Please Wish me luck on June 5, 2016

carlitos_370z · 04-21-2016, 01:39 PM

awesome dude!!! please take some pics and videos for us

TopgunZ · 04-21-2016, 03:44 PM

Swiss. That is why I switched the 25mm bpv out with a vortech 50mm or Tial 50mm bypass valve.

TopgunZ · 04-21-2016, 03:48 PM

A guy from the 350z forum hit me up asking if ill make a kit for the stillen 350z's. He said he went with 2 high gpm pumps and a large trunk mounted water reservoir and its not working very well.

The trick for you Swiss is to get more efficiency out of that supercharger. You will always be battling heat and if you are going to try for 12 psi it is going to get much worse.

If you are going to be putting in fresh bearings and seals you HAVE to spring for the Si upgrade. You will get 2 more psi out of it and it will still be more efficient.

swiss370Z · 04-23-2016, 04:42 PM

Compressor optimization is under renovation.....

@HK-Power

BTW: The Impeller is of a specialist from Germany

swiss370Z · 04-25-2016, 07:08 AM

Current starting field:
Starterfeld 2. VL Deutsche Meisterschaft 2016 - SCC500

Who has the number: 37..

TopgunZ · 04-25-2016, 07:19 AM

Quote:

Originally Posted by swiss370Z

Compressor optimization is under renovation.....

@HK-Power

BTW: The Impeller is of a specialist from Germany

So what impeller is this? Are you supposed to gain psi from it and if so how much?

swiss370Z · 04-29-2016, 11:51 AM

//// Idea Generator today, at HK-Power \\\\

Today I was personally at the tuner on the spot!

Big Power stands there

Nissan 370Z with the Nissan GT-R "Twin Turbo" Kit

Toyota Supra (>1000 PS)

and my little "Z-Girl"

Without Vortech compressor (Do not worry, with the best internal parts from SKF, ready for installation ):

Next Learn follow up tomorrow .... we have some discussion!
Very special ideas

A little Teaser:

TopgunZ · 04-29-2016, 12:03 PM

Are both your MAFs going to be in that one pipe?

Masterbeatty · 04-29-2016, 12:27 PM

Nice!

You should tell the person with the GTR swap to join the forum and share their story and build.

swiss370Z · 04-29-2016, 01:24 PM

Quote:

Originally Posted by TopgunZ

Are both your MAFs going to be in that one pipe?

Hey TopgunZ

More info will follow......

Stay tuned

04-16-2016, 10:17 PM	#361 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	I'm not sure where you were going with the psi gain from changing the bypass. That won't do anything to help power unless your old one was breaking open. The bigger valve will definitely make it louder. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 04-16-2016 at 10:37 PM.

04-17-2016, 05:06 PM	#363 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,866 Drives: 2011 Nismo GM 6M Rep Power: 2684436	You have better English then most do here. BOLIO 671, swiss370Z, Masterbeatty and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-21-2016, 01:39 PM	#366 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	awesome dude!!! please take some pics and videos for us swiss370Z likes this.

04-21-2016, 03:44 PM	#367 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Swiss. That is why I switched the 25mm bpv out with a vortech 50mm or Tial 50mm bypass valve. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-21-2016, 03:48 PM	#368 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	A guy from the 350z forum hit me up asking if ill make a kit for the stillen 350z's. He said he went with 2 high gpm pumps and a large trunk mounted water reservoir and its not working very well. The trick for you Swiss is to get more efficiency out of that supercharger. You will always be battling heat and if you are going to try for 12 psi it is going to get much worse. If you are going to be putting in fresh bearings and seals you HAVE to spring for the Si upgrade. You will get 2 more psi out of it and it will still be more efficient. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-18-2016, 11:13 PM	#364 (permalink)
bewhitey Base Member Join Date: Dec 2015 Location: Denver Posts: 78 Drives: 370z 40th #704 M6 SC Rep Power: 9	Hey there, I just bought a Stillen supercharged 40th anniversary Z about 5 months ago.... haven't been doing anything close to the awesome stuff you have done to your car, only silly things like short shifters and led lights.... I did get it uprev tuned for altitude, hopped up to 410whp at the last second on a dynojet. Just wanted to say thanks for the great thread you have kept going. Next on my list is an oil cooler after having read through all these pages, either that or selling it because I'm afraid I am going to blow the motor! What do you think caused your piston burn up craziness??? Low oil pressure from adding an oil cooler... son of a! I am thinking of going with a Z1 motorsports 34 row kit https://www.z1motorsports.com/z1-pro...it-p-4135.html any thoughts or suggestions?

04-29-2016, 12:03 PM	#373 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Are both your MAFs going to be in that one pipe? swiss370Z likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-29-2016, 12:27 PM	#374 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122866	Nice! You should tell the person with the GTR swap to join the forum and share their story and build. swiss370Z likes this. __________________ 2011 MB 6MT Masterbeatty journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN 370Z Supercharger System - Announcement!!!	Kyle@STILLEN	Forced Induction	2643	01-02-2022 09:28 PM
370Z Stillen supercharger DIY instructions	wortmeister	DIY Section (Do-It-Yourself)	11	06-01-2012 07:09 AM
Stillen Intercooled Supercharger for the 370z!	DriveLineEric	Drivetrain/Engine	14	03-09-2011 04:31 PM
370z/G37 Stillen Supercharger Kit - Like new Condition	weiboy718	Parts for sale (Private Classifieds)	64	01-30-2011 11:28 AM
STILLEN Introduces 515hp Supercharger System for Nissan 370Z / Infiniti G37	speed_BMW330i	Forced Induction	11	03-31-2010 09:58 AM