GTM Supercharger Stage 1 w/ F.I. LTH

JordoKAP · 05-11-2011, 11:38 PM

Depending on which compressor gtm using with the stage 1 kit.

According to the mfg spec of each compressor:
C38-61 - 300-550hp .50kg/s converted to 66lbs/min
C38-71 - 350-590hp .52kg/s converted to 68lbs/min
C38-81 - 400-630hp .55kg/s converted to 72lbs/min

and the C38-91 is 11 percent more then C38-91.

Converting the flow rates .63 kg/s to lbs/min (like most turbo guys refer to), the c38-91 can support 83lbs/min! 800hp!!

http://www.power-enterprise.co.jp/ro...rotrex/C38.pdf

gttsome · 05-12-2011, 12:09 AM

I Had to fix a-lot of things that were bought installed and promised from gtm. It took Mr. Church, Mr. Tony of FI, plus a few friends with good wizards "to make my ride right after the "gtm upgrade". Keep shopping all, there are lots-o-stuff for your fun out there now days, for alternative upgrades that work without intervention on the post build reaching into the $$$$$.

Take care all.

NewYorkJon34 · 05-12-2011, 12:13 AM

Quote:

Originally Posted by gttsome

I Had to fix a-lot of things that were bought installed and promised from gtm. It took Mr. Church, Mr. Tony of FI, plus a few friends with good wizards "to make my ride right after the "gtm upgrade". Keep shopping all, there are lots-o-stuff for your fun out there now days, for alternative upgrades that work without intervention on the post build reaching into the $$$$$.

Take care all.

WTF did u just say?

gttsome · 05-12-2011, 12:17 AM

Read it again.

Quote:

Originally Posted by NewYorkJon34

WTF did u just say?

Jamaica · 05-12-2011, 12:19 AM

Quote:

Originally Posted by gttsome

Read it again.

maybe he cant read.

ClemsonWill · 05-12-2011, 10:06 AM

Quote:

Originally Posted by gttsome

I Had to fix a-lot of things that were bought installed and promised from gtm. It took Mr. Church, Mr. Tony of FI, plus a few friends with good wizards "to make my ride right after the "gtm upgrade". Keep shopping all, there are lots-o-stuff for your fun out there now days, for alternative upgrades that work without intervention on the post build reaching into the $$$$$.

Take care all.

Please do explain in more detail. I would like to know what problems you had to have all of these people fix.

Red__Zed · 05-12-2011, 10:09 AM

Quote:

Originally Posted by ClemsonWill

Please do explain in more detail. I would like to know what problems you had to have all of these people fix.

I agree. It is helpful for the community to know specifics.

NewYorkJon34 · 05-12-2011, 04:31 AM

Like I'm going to believe someone with 20 posts saying that an unnamed gtm kit is garbage, come on rly. And jamaica if your just going to post negative things you could

gttsome · 05-12-2011, 07:33 AM

There goes that free speech thing again right out the window, what were those 1776 guys thinking anyway.

Quote:

Originally Posted by NewYorkJon34

Like I'm going to believe someone with 20 posts saying that an unnamed gtm kit is garbage, come on rly. And jamaica if your just going to post negative things you could

Jamaica · 05-12-2011, 09:33 AM

Quote:

Originally Posted by NewYorkJon34

Like I'm going to believe someone with 20 posts saying that an unnamed gtm kit is garbage, come on rly. And jamaica if your just going to post negative things you could

Lol y u mad?

gttsome · 05-12-2011, 09:48 AM

Start a flame war? Nice, just giving my witness, and based on the bashing given out for not drinking the Koolaid, what would be the attraction to say anymore, carry on and best of luck to you.

"What exactly did you have to 'fix,' you came in this thread posting a bunch of stuff was not working which was promised and it took others to fix it. Are you running a GTM Stage 1 SC with LTH or just randomly trying to start a flame war?"

theDreamer · 05-12-2011, 09:51 AM

Quote:

Originally Posted by gttsome

Start a flame war? Nice, just giving my witness, and based on the bashing given out for not drinking the Koolaid, what would be the attraction to say anymore, carry on and best of luck to you.

"What exactly did you have to 'fix,' you came in this thread posting a bunch of stuff was not working which was promised and it took others to fix it. Are you running a GTM Stage 1 SC with LTH or just randomly trying to start a flame war?"

Your 'witness' was a blank statement about having to fix something, which many users have just put on their car, tuned and been on their way. When someone comes onto the forum stating they had to call upon many other people to fix something, people would like to know what it is you had to do.
I do not drink the koolaid of anyone, if you spend some time on this forum you might see I have owned almost any product from any compnay. Stillen, GTM, Volk, Takeda, Fast Intentions, Berk, etc. I provide information to help better this community and when someone says what you said, it throws off alarms you are just trolling or starting a flame war.

JTTZR · 05-12-2011, 04:51 AM

Brrrrrrrrr - hold your horses, everyone

NYBladeZ · 05-12-2011, 08:13 AM

Dude, no one said you can't have free speech. However, even free speech is limited by defamation. Yes, a lot of us on here are GTM fanboys, they have done a lot and continue to do a lot for the Z community. However, if you have a story, spill, don't just allude to it.

03WhiteGT · 05-12-2011, 08:25 AM

Hello all; new to the Z world...

Just purchased 2011 370 two weeks ago, but have not made an introduction post because my baby has been at the dealership since I bought it (new transmission and getting some scratches fixed).

Anyway, coming from the Mustang world, the 370's are new to me. I was looking at the dyno posted and have a question.. Is the A/F safe running that lean with 8lbs of boost? I have always had my boosted stangs tuned to 10-11, but never anything above 11.

Just curious...

Jeremie

05-12-2011, 12:09 AM	#2 (permalink)
gttsome Base Member Join Date: Sep 2009 Location: California Posts: 38 Drives: G37STT Rep Power: 16	Did a few things to make it fly right.. I Had to fix a-lot of things that were bought installed and promised from gtm. It took Mr. Church, Mr. Tony of FI, plus a few friends with good wizards "to make my ride right after the "gtm upgrade". Keep shopping all, there are lots-o-stuff for your fun out there now days, for alternative upgrades that work without intervention on the post build reaching into the $$$$$. Take care all.

05-12-2011, 04:51 AM	#13 (permalink)
JTTZR Base Member Join Date: Feb 2011 Location: Sydney Posts: 136 Drives: Renault Megane RS265 Rep Power: 15	Brrrrrrrrr - hold your horses, everyone __________________ 2014 Renault Megane R.S. Cup 265 Pipercross Panel Filter // Fastchip Stage 1 ECU remap

05-12-2011, 08:13 AM	#14 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 21	Dude, no one said you can't have free speech. However, even free speech is limited by defamation. Yes, a lot of us on here are GTM fanboys, they have done a lot and continue to do a lot for the Z community. However, if you have a story, spill, don't just allude to it. __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 03:42 AM
The Specialty-Z GTM Stage 2 Build	Seb@SZ	Forced Induction	62	12-12-2010 10:34 AM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 10:59 AM
RGM Stage 1 (Need Some Help)	alexpila	Tuning	1	02-01-2010 11:09 AM

05-11-2011, 11:38 PM	#1 (permalink)
JordoKAP Base Member Join Date: Apr 2011 Location: Baton Rouge, La Posts: 88 Drives: 10 Nissan 370z Rep Power: 15	Depending on which compressor gtm using with the stage 1 kit. According to the mfg spec of each compressor: C38-61 - 300-550hp .50kg/s converted to 66lbs/min C38-71 - 350-590hp .52kg/s converted to 68lbs/min C38-81 - 400-630hp .55kg/s converted to 72lbs/min and the C38-91 is 11 percent more then C38-91. Converting the flow rates .63 kg/s to lbs/min (like most turbo guys refer to), the c38-91 can support 83lbs/min! 800hp!! http://www.power-enterprise.co.jp/ro...rotrex/C38.pdf

05-12-2011, 04:31 AM	#8 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Like I'm going to believe someone with 20 posts saying that an unnamed gtm kit is garbage, come on rly. And jamaica if your just going to post negative things you could

05-12-2011, 09:48 AM	#11 (permalink)
gttsome Base Member Join Date: Sep 2009 Location: California Posts: 38 Drives: G37STT Rep Power: 16	Start a flame war? Nice, just giving my witness, and based on the bashing given out for not drinking the Koolaid, what would be the attraction to say anymore, carry on and best of luck to you. "What exactly did you have to 'fix,' you came in this thread posting a bunch of stuff was not working which was promised and it took others to fix it. Are you running a GTM Stage 1 SC with LTH or just randomly trying to start a flame war?"

05-12-2011, 08:25 AM	#15 (permalink)
03WhiteGT Base Member Join Date: May 2011 Location: Dallas, TX Posts: 31 Drives: 2008 Corvette Rep Power: 15	Hello all; new to the Z world... Just purchased 2011 370 two weeks ago, but have not made an introduction post because my baby has been at the dealership since I bought it (new transmission and getting some scratches fixed). Anyway, coming from the Mustang world, the 370's are new to me. I was looking at the dyno posted and have a question.. Is the A/F safe running that lean with 8lbs of boost? I have always had my boosted stangs tuned to 10-11, but never anything above 11. Just curious... Jeremie