GTM TT build - OCT 15th

xbigb4ller69z · 10-31-2010, 05:36 PM

Yeah, I'm sending the oil pan spacer back, just to be safe.

Seb@SZ · 10-31-2010, 05:38 PM

Quote:

Originally Posted by SAM@GTM

You should really follow the instruction and install the turbo oil return in the pan and not in a spacer, adding a spacer is ok to increase engine oil capacity but will not do as good of a job when installing the turbo oil returns in the oil pan. The VQVHR engine has a lot of oil pressure (higher then the average engine) and ball bearing turbos are very sensitive to oil pressure and return volume .

Sam

HUGE 2nd.

xbigb4ller69z · 11-05-2010, 01:17 PM

is anyone familiar with this?

ARK DESIGN Multi Function Dash (Engine Rev , Throttle Opening, Injector Opening, Vehicle Speed, Simple A/F , Water Temprature)

http://www.arkdesign-us.com/mfd-multi-function-dash

I currently have the prosport gauges, but I'm thinking about swapping for the MFS2. Any inputs?

theDreamer · 11-05-2010, 01:30 PM

Quote:

Originally Posted by xbigb4ller69z

is anyone familiar with this?

ARK DESIGN Multi Function Dash (Engine Rev , Throttle Opening, Injector Opening, Vehicle Speed, Simple A/F , Water Temprature)

Multi Function Dash

I currently have the prosport gauges, but I'm thinking about swapping for the MFS2. Any inputs?

Looks good, just make sure it works properly with Nissan and you can tap properly for boost. I know some companies who make these are designed for cars that are boosted from factory since the factory ECU has a built in boost reader.

wishihadnav · 11-05-2010, 01:47 PM

that looks great!...Dreamer is correct to make sure they have an optional sensor/adaptor for boost..

RCZ · 11-05-2010, 02:02 PM

Quote:

Originally Posted by KaienZ34

Where at in Florida is this shop ? I'm in south Louisiana (about 10hrs from Disney) and looking into most likely GTM SC stg 2 kit. If there close enough i'd like to go too someone that has done a 370 or two before.

Its in West Palm Beach. Not that close...

xbigb4ller69z · 11-05-2010, 02:34 PM

does anyone know of a company that does the same thing as ark design that would replace all the individual gauges? (trying to avoid hks camp)

wishihadnav · 11-05-2010, 02:47 PM

yeah the Greddy infometer

GReddy

wishihadnav · 11-05-2010, 02:49 PM

this looks pretty promising as well..

Aeroforce Interceptor

xbigb4ller69z · 11-05-2010, 03:09 PM

Quote:

Originally Posted by wishihadnav

yeah the Greddy infometer

GReddy

Good find, but dang! if you do the math after buying all sensors we're looking at about $1,000 if not more! lol that's crazy

98intrigue · 11-05-2010, 03:12 PM

Quote:

Originally Posted by xbigb4ller69z

does anyone know of a company that does the same thing as ark design that would replace all the individual gauges? (trying to avoid hks camp)

Talk to Chris...we drove Ian Snell's Evo X MR from Orlando to Pittsburgh and the car had the ARK gauge. I like it, but I just thought it was too small.

xbigb4ller69z · 11-05-2010, 03:19 PM

Quote:

Originally Posted by 98intrigue

Talk to Chris...we drove Ian Snell's Evo X MR from Orlando to Pittsburgh and the car had the ARK gauge. I like it, but I just thought it was too small.

I know he told me about Ark Design, but I'm not sure if it's compatible with the 370z because is not turbo from the factory. I called Ark but no one answers the phone?? dont know

wishihadnav · 11-05-2010, 03:29 PM

Quote:

Originally Posted by xbigb4ller69z

Good find, but dang! if you do the math after buying all sensors we're looking at about $1,000 if not more! lol that's crazy

yeah its pretty nice but it aint cheap...you gotta pay the cost to be the boss

fstrnldr · 11-06-2010, 07:56 PM

Quote:

Originally Posted by xbigb4ller69z

I know he told me about Ark Design, but I'm not sure if it's compatible with the 370z because is not turbo from the factory. I called Ark but no one answers the phone?? dont know

Probably all at SEMA try them again next week.

xbigb4ller69z · 11-10-2010, 01:13 PM

Heres more pictures of the install... only thing left to do is install the dash unit from Ark Design. ( Car should be ready and tuned by HP LOGIC on Sunday hopefully. )

Special thanks to Danny for the pictures...

10-31-2010, 05:36 PM	#76 (permalink)
xbigb4ller69z Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 261 Drives: 2010 370z 40th ANNIV Rep Power: 17	Yeah, I'm sending the oil pan spacer back, just to be safe. __________________ Eibach pro kit/ Stillen sway bars / SPC rear camber arms / F.I. 12" CBE / GTM TT / Southbend clutch stg 3 / ProSport Gauges/ ZSpeed Performance Heavy Duty Concentric Slave Cylinder / Twin Oil Coolers. / Tuned by HP Logic

11-05-2010, 01:17 PM	#78 (permalink)
xbigb4ller69z Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 261 Drives: 2010 370z 40th ANNIV Rep Power: 17	is anyone familiar with this? ARK DESIGN Multi Function Dash (Engine Rev , Throttle Opening, Injector Opening, Vehicle Speed, Simple A/F , Water Temprature) http://www.arkdesign-us.com/mfd-multi-function-dash I currently have the prosport gauges, but I'm thinking about swapping for the MFS2. Any inputs? __________________ Eibach pro kit/ Stillen sway bars / SPC rear camber arms / F.I. 12" CBE / GTM TT / Southbend clutch stg 3 / ProSport Gauges/ ZSpeed Performance Heavy Duty Concentric Slave Cylinder / Twin Oil Coolers. / Tuned by HP Logic

11-05-2010, 02:34 PM	#82 (permalink)
xbigb4ller69z Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 261 Drives: 2010 370z 40th ANNIV Rep Power: 17	does anyone know of a company that does the same thing as ark design that would replace all the individual gauges? (trying to avoid hks camp) __________________ Eibach pro kit/ Stillen sway bars / SPC rear camber arms / F.I. 12" CBE / GTM TT / Southbend clutch stg 3 / ProSport Gauges/ ZSpeed Performance Heavy Duty Concentric Slave Cylinder / Twin Oil Coolers. / Tuned by HP Logic

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAM Competition Open House - May 15th	Clint@AAMComp	AAM Competition	14	05-19-2010 07:13 PM
Miami Meet Saturday May 15th	westpak	South East Region	11	05-18-2010 08:19 AM
Talledega Grand Prix Track Day Sat May 15th.	Sharif@Forged	South East Region	1	05-14-2010 10:54 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
Cruise to the spit Sunday 15th November	Aus370z	Australia/New Zealand	16	11-16-2009 10:42 PM

11-05-2010, 01:47 PM	#80 (permalink)
wishihadnav A True Z Fanatic Join Date: Nov 2009 Location: 90090 Posts: 1,851 Drives: Force Fed Nismo Rep Power: 185	that looks great!...Dreamer is correct to make sure they have an optional sensor/adaptor for boost..

11-05-2010, 02:47 PM	#83 (permalink)
wishihadnav A True Z Fanatic Join Date: Nov 2009 Location: 90090 Posts: 1,851 Drives: Force Fed Nismo Rep Power: 185	yeah the Greddy infometer GReddy

11-05-2010, 02:49 PM	#84 (permalink)
wishihadnav A True Z Fanatic Join Date: Nov 2009 Location: 90090 Posts: 1,851 Drives: Force Fed Nismo Rep Power: 185	this looks pretty promising as well.. Aeroforce Interceptor