Rear Mounted Turbo (scratch build)

Zsteve · 08-27-2010, 04:20 PM

Quote:

Originally Posted by jnaut

TURBO is on order now...woohoo!!

Have you thought about doing a recirculating valve to put the unused air back into the intake path and help the turbo spool up?

but filter location is a little curious to me too.

corbin09 · 08-27-2010, 04:48 PM

Subscribed for awesomeness. I will probably be going with a home made kit along these lines aswell!

jnaut · 08-28-2010, 07:38 AM

Quote:

Originally Posted by 96bigbody

I know you can get some good piping kits and intercoolers on ebay.

thats where i found it... its already shipped.

jnaut · 08-28-2010, 07:44 AM

Quote:

Originally Posted by Zsteve

Have you thought about doing a recirculating valve to put the unused air back into the intake path and help the turbo spool up?

but filter location is a little curious to me too.

it would be a good idea also as having it as a atmosphere vent will cause a momentary rich condition. plus i dont really like the sound. we will see... thanks for the input steve

Zsteve · 08-28-2010, 09:47 AM

Quote:

Originally Posted by jnaut

it would be a good idea also as having it as a atmosphere vent will cause a momentary rich condition. plus i dont really like the sound. we will see... thanks for the input steve

how do they keep the filter from getting so much road dirt when under the car? Can it be placed in the engine?

jnaut · 08-28-2010, 09:50 AM

Quote:

Originally Posted by Zsteve

how do they keep the filter from getting so much road dirt when under the car? Can it be placed in the engine?

i will have to take care by not driving in deep puddles, but i am going to run a prefilter also with a splash shield. the car is a toy so i dont drive everyday.when the turbo get in ill start mocking it up and taking some pics...

jnaut · 08-28-2010, 02:12 PM

just got tracking number.... turbo will arrive thursday.... and the pics will follow shortly after

Jamaica · 08-28-2010, 02:37 PM

Quote:

Originally Posted by jnaut

just got tracking number.... turbo will arrive thursday.... and the pics will follow shortly after

what kinda turbo?

jnaut · 08-28-2010, 02:49 PM

Quote:

Originally Posted by jamaica951

what kinda turbo?

GARRETT gt3582r
.82 a/r, anti surge holes, v-band exhaust, 4" inlet,2.5 "outlet,polished compressor housing

The pic is of a general gt35r w/ comperssor surge holes

Jamaica · 08-28-2010, 03:13 PM

Good job. The piping on the turbo setup should be interesting since its a dual compared the 350z throttle body.

RCZ · 08-29-2010, 03:27 PM

^ You'll like how he got around this

Zsteve · 08-29-2010, 03:29 PM

Quote:

Originally Posted by jnaut

GARRETT gt3582r
.82 a/r, anti surge holes, v-band exhaust, 4" inlet,2.5 "outlet,polished compressor housing

The pic is of a general gt35r w/ comperssor surge holes

is this a quick spooling turbo for low end tq or high end tq?

G Fo12ce · 08-29-2010, 07:33 PM

Quote:

Originally Posted by phelan

The Zombie rear mount turbo saga - LS1TECH

interesting read for those who are curious.

HAHA

Quote:

Chapter 2... The Empire Strikes Back!

The rear mount turbo, loved by some, despised by others. How can such a simple device as a turbo and it's where it's located stir as much hatred as it does. Perhaps the hatred is due to latent homosexuality since rear mount turbo users "like their turbo in the butt". Who knows.

Interesting read. OP sounds like you should get the whole exhaust before the turbo coated with something like THIS (I was going to link HPC Coatings but it looks like there was a merger with Jet Hot). On my Supra I had the manifold, turbine housing and down pipe done in what looks like what they are calling Jet Hot 2000 now.

wh1te370z · 09-01-2010, 02:05 PM

subscribed.

Zsteve · 09-01-2010, 08:37 PM

so if intake filters have to go under car then IMO this is not a good solution for DD cars. Can the filter be put in the engine bay still?

08-28-2010, 02:12 PM	#52 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 19	just got tracking number.... turbo will arrive thursday.... and the pics will follow shortly after __________________ Best 1/4 mile 12.24 Best mph 114.5_______

09-01-2010, 02:05 PM	#59 (permalink)
wh1te370z Track Member Join Date: Jul 2010 Location: New York, Long Island Posts: 559 Drives: PW Base Sport 6 Spd Rep Power: 17	subscribed. __________________ 1998 BMW 328is... Track Build 2010 White 370z.... sold

09-01-2010, 08:37 PM	#60 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 23	so if intake filters have to go under car then IMO this is not a good solution for DD cars. Can the filter be put in the engine bay still? __________________ 2010 LS3 C6 Silver coupe corvette

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAM Competition/Lou Fusz Nissan: 370Z Twin Turbo Build	Jon@Altered	Forced Induction	987	05-25-2012 08:47 AM
2010 370Z NISMO Twin Turbo build courtesy of GTM	stormcrow	Forced Induction	273	02-16-2011 06:41 AM
TITAN's Twin Turbo build Done!!!!!!	kenbains12	Forced Induction	49	06-18-2010 07:32 AM
TITAN installed Greddy Twin Turbo build Done!!!!!!	kenbains12	Tuning	2	06-10-2010 07:34 PM
Rear mounted turbo kit	Brazilbro	Forced Induction	64	06-29-2009 06:39 PM

08-27-2010, 04:48 PM	#47 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 281	Subscribed for awesomeness. I will probably be going with a home made kit along these lines aswell!

08-28-2010, 03:13 PM	#55 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 75	Good job. The piping on the turbo setup should be interesting since its a dual compared the 350z throttle body.

08-29-2010, 03:27 PM	#56 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1120	^ You'll like how he got around this