Rear Mounted Turbo (scratch build)

jnaut · 09-11-2010, 08:04 AM

still ordering in parts, i just received my waste gate and heat exchanger. next to be ordered is my injectors and air/water intercooler.

JB-370z · 09-11-2010, 10:08 AM

^^^^I give you props for doing this on your own.

Dustin@Z1 · 09-11-2010, 11:08 AM

Where are you plannin on mounting the Intercooler?

I am assuming that you are planning on retaining the Y-pipe factory exhaust to feed the single turbo. Have you started mocking up pipe routing up front yet since it will be a single feed from the compressor that will need to split to feed both Throttle bodies?

jnaut · 09-11-2010, 12:13 PM

Quote:

Originally Posted by JB-370z

^^^^I give you props for doing this on your own.

Thanks bro

jnaut · 09-11-2010, 12:19 PM

Quote:

Originally Posted by Dustin@Z1

Where are you plannin on mounting the Intercooler?

I am assuming that you are planning on retaining the Y-pipe factory exhaust to feed the single turbo. Have you started mocking up pipe routing up front yet since it will be a single feed from the compressor that will need to split to feed both Throttle bodies?

This is in the works... hahaha

nismolife · 09-15-2010, 12:54 AM

On the "other" forum there was a guy who had one of his cats self destruct, which sent metal bits into the turbo - do you use a screen or anything?

WarmAndSCSI · 09-15-2010, 02:15 AM

Quote:

Originally Posted by nismolife

On the "other" forum there was a guy who had one of his cats self destruct, which sent metal bits into the turbo - do you use a screen or anything?

It's in the best interest of performance and turbo health to go catless with a setup like this... I'm not really a firm believer of catalytic converters to begin with, though, so whatever

1slow370 · 09-15-2010, 05:39 AM

Quote:

Originally Posted by nismolife

On the "other" forum there was a guy who had one of his cats self destruct, which sent metal bits into the turbo - do you use a screen or anything?

Was that other forum MY350 aka the Douche forum aka where you go if you want to be afraid to ask questions and post your opinion? Also Cats should never be left in your exhaust system for any reason. Besides PETA getting upset, and it being a HUGE restriction in your exhaust, i'm sure a cat self destructing in your exhaust would would probably ruin the paint on your bumper as well as making your car smell like a dead animal after a while.

jnaut · 09-15-2010, 08:08 AM

I have long tubes... So no cats

jnaut · 09-15-2010, 08:13 AM

There will be more pics this weekend but just been spending a lot of time on customers cars and on my aquatrax (also turbocharged) LOL

1slow370 · 09-16-2010, 04:25 AM

ooohhhh long tubes are double edged sword on RMT's. get those babies jet hotted and wrapped stat.

Carbon Fiber Element · 09-16-2010, 01:50 PM

This should be interesting....btw...Aquatrax=

I got one too!!

Flyboy · 09-16-2010, 03:39 PM

Quote:

Originally Posted by tonester1011

This should be interesting....btw...Aquatrax=

I got one too!!

Aquatrax = slow but reliable.

jnaut · 09-16-2010, 07:39 PM

Quote:

Originally Posted by Flyboy

Aquatrax = slow but reliable.

i dont race it just wave jump and dive off it.

Red__Zed · 09-16-2010, 08:32 PM

Subscribing to watch progress....

09-11-2010, 08:04 AM	#76 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	still ordering in parts, i just received my waste gate and heat exchanger. next to be ordered is my injectors and air/water intercooler. __________________ Best 1/4 mile 12.24 Best mph 114.5_______

09-11-2010, 10:08 AM	#77 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	^^^^I give you props for doing this on your own. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

09-15-2010, 12:54 AM	#81 (permalink)
nismolife Base Member Join Date: Oct 2009 Location: Everett Posts: 24 Drives: 09 Nismo 370Z Rep Power: 15	Turbo inlet screen? On the "other" forum there was a guy who had one of his cats self destruct, which sent metal bits into the turbo - do you use a screen or anything?

09-15-2010, 08:08 AM	#84 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	I have long tubes... So no cats __________________ Best 1/4 mile 12.24 Best mph 114.5_______

09-15-2010, 08:13 AM	#85 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	There will be more pics this weekend but just been spending a lot of time on customers cars and on my aquatrax (also turbocharged) LOL __________________ Best 1/4 mile 12.24 Best mph 114.5_______

09-11-2010, 11:08 AM	#78 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 17	Where are you plannin on mounting the Intercooler? I am assuming that you are planning on retaining the Y-pipe factory exhaust to feed the single turbo. Have you started mocking up pipe routing up front yet since it will be a single feed from the compressor that will need to split to feed both Throttle bodies?

09-16-2010, 04:25 AM	#86 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	ooohhhh long tubes are double edged sword on RMT's. get those babies jet hotted and wrapped stat. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

09-16-2010, 01:50 PM	#87 (permalink)
Carbon Fiber Element Track Member Join Date: Oct 2009 Location: nj Posts: 937 Drives: 04 nissan 350z db m6 Rep Power: 198	This should be interesting....btw...Aquatrax= I got one too!!

09-16-2010, 08:32 PM	#90 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	Subscribing to watch progress....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAM Competition/Lou Fusz Nissan: 370Z Twin Turbo Build	Jon@Altered	Forced Induction	987	05-25-2012 08:47 AM
2010 370Z NISMO Twin Turbo build courtesy of GTM	stormcrow	Forced Induction	273	02-16-2011 06:41 AM
TITAN's Twin Turbo build Done!!!!!!	kenbains12	Forced Induction	49	06-18-2010 07:32 AM
TITAN installed Greddy Twin Turbo build Done!!!!!!	kenbains12	Tuning	2	06-10-2010 07:34 PM
Rear mounted turbo kit	Brazilbro	Forced Induction	64	06-29-2009 06:39 PM